Difference between revisions of "J-33 "Wheesley" Turbofan Engine"
Lone Starr (talk | contribs) (Verion history 1.0 added) |
Lone Starr (talk | contribs) m (typos) |
||
| Line 7: | Line 7: | ||
As on all engines, thrust varies with height. Contrary to all rocket engines, air breathing engines' thrust diminishes with increasing height. Furthermore differing from most rocket engines, this has a real impact on usage, as the effect is far more distinct. | As on all engines, thrust varies with height. Contrary to all rocket engines, air breathing engines' thrust diminishes with increasing height. Furthermore differing from most rocket engines, this has a real impact on usage, as the effect is far more distinct. | ||
| − | Its maximum '''stationary''' thrust is rated with 115 kN at sea level. At about 4500 m it generates just 69 kN, at about 11000 m it generates not more than 22 kN, ceasing to work at about 15600 m. Note that the behaviour between | + | Its maximum '''stationary''' thrust is rated with 115 kN at sea level. At about 4500 m it generates just 69 kN, at about 11000 m it generates not more than 22 kN, ceasing to work at about 15600 m. Note that the behaviour between these points (given in the part stats)is somewhat non-linear, especially above 4000 m. |
Thrust output also varies with '''speed''', although far less then on the more advanced engines. Up to mach 0.8 it stays somewhat constant, slightly rising to a maximum of about 170% at mach 1.6 .. 1.8, dropping to zero at mach 2.5. | Thrust output also varies with '''speed''', although far less then on the more advanced engines. Up to mach 0.8 it stays somewhat constant, slightly rising to a maximum of about 170% at mach 1.6 .. 1.8, dropping to zero at mach 2.5. | ||
| Line 13: | Line 13: | ||
The fuel-to-thrust ratio (also called Isp in some circles) stays constant over the full range of application, which is a big change to KSP pre 1.0 versions. It is rated at 19200 s, making it by far the nominal most fuel efficient engine. However, as the thrust/height curve of this engine limits its usage to still quite thick air, this value is somewhat put into perspective. | The fuel-to-thrust ratio (also called Isp in some circles) stays constant over the full range of application, which is a big change to KSP pre 1.0 versions. It is rated at 19200 s, making it by far the nominal most fuel efficient engine. However, as the thrust/height curve of this engine limits its usage to still quite thick air, this value is somewhat put into perspective. | ||
| − | All in all it works best at 8000 .. 12000 m height. Flying lower, the high air resistance eats up the fuel efficiency (you need far more thrust to achieve the same speed), while in higher areas the engines thrust output is just too low for reasonable flight. | + | All in all, it works best at 8000 .. 12000 m height. Flying lower, the high air resistance eats up the fuel efficiency (you need far more thrust to achieve the same speed), while in higher areas the engines thrust output is just too low for reasonable flight. |
| − | Note that currently, the only planets which these engines will work on | + | Note that currently, the only planets which these engines will work on are [[Kerbin]] and Jool's moon [[Laythe]]. |
== Product description == | == Product description == | ||
Revision as of 20:32, 8 June 2015
| J-33 "Wheesley" Turbofan Engine | ||
 | ||
| Jet engine by C7 Aerospace Division | ||
| Radial size | Small | |
| Cost | (total) | 1 400.00 
|
| Mass | (total) | 1.500 t |
| Drag | 0.2 | |
| Max. Temp. | 2000 K | |
| Impact Tolerance | 7 m/s | |
| Research |  Aerodynamics
| |
| Unlock cost | 4 000
| |
| Since version | 0.15 | |
| Part configuration | jetEngineBasic.cfg | |
| Maximum thrust | 120.00 kN | |
| Isp | (max) | 10500 s |
| Fuel consumption | 0.23  /s
| |
| Intake air consumption | 29.60  /s
| |
| Thrust vectoring | No | |
| Electricity generated | 4 ⚡/s | |
| Testing Environments | ||
| On the surface | Yes | |
| In the ocean | Yes | |
| On the launchpad | Yes | |
| In the atmosphere | Yes | |
| Sub-orbital | No | |
| In an orbit | No | |
| On an escape | No | |
| Docked | No | |
| Test by staging | Yes | |
| Manually testable | Yes | |
| Packed volume | None | |
The Basic Jet Engine is an air-breathing engine which uses liquid fuel and intake air.
Contents
Usage
This engine is the first air breathing engine to unlock in the tech tree. Technically it is also the most basic one, hence the name. As on all engines, thrust varies with height. Contrary to all rocket engines, air breathing engines' thrust diminishes with increasing height. Furthermore differing from most rocket engines, this has a real impact on usage, as the effect is far more distinct.
Its maximum stationary thrust is rated with 115 kN at sea level. At about 4500 m it generates just 69 kN, at about 11000 m it generates not more than 22 kN, ceasing to work at about 15600 m. Note that the behaviour between these points (given in the part stats)is somewhat non-linear, especially above 4000 m.
Thrust output also varies with speed, although far less then on the more advanced engines. Up to mach 0.8 it stays somewhat constant, slightly rising to a maximum of about 170% at mach 1.6 .. 1.8, dropping to zero at mach 2.5.
The fuel-to-thrust ratio (also called Isp in some circles) stays constant over the full range of application, which is a big change to KSP pre 1.0 versions. It is rated at 19200 s, making it by far the nominal most fuel efficient engine. However, as the thrust/height curve of this engine limits its usage to still quite thick air, this value is somewhat put into perspective.
All in all, it works best at 8000 .. 12000 m height. Flying lower, the high air resistance eats up the fuel efficiency (you need far more thrust to achieve the same speed), while in higher areas the engines thrust output is just too low for reasonable flight.
Note that currently, the only planets which these engines will work on are Kerbin and Jool's moon Laythe.
Product description
| “ | A standard air breathing engine. This model utilizes limited range thrust vectoring. This engine works best at low cruising speeds and altitudes. | ” |
Created by: C. Jenkins
Triva
The designation “J-33 Wheesley” may be a reference to the real-life JT3D turbofan jet engine, also known as the TF33, made by U.S. aerospace company Pratt & Whitney which was involved with the Space Race.
Changes
- complete overhaul of most characteristics
- Initial Release
