Difference between revisions of "User:Joshuadery"

Revision as of 14:09, 26 December 2014

MODULES FROM MODS

Defining a module is a task in and of itself and one that I'm sure has already been covered in other places. Many modules defined by mods are duplicating effects that could be created with stock modules, but for one reason or another, the mod owner has decided to create their own modules (possibly for degree of control, possibly because the stock module didn't quite do everything they needed). In any event, I've looked at some of the Mod modules, and detailed them below. By mod, they are:

Kerbal Assembly System

Kerbal Assembly System is most noted for adding the option to grab and move parts using Kerbals. It also allows for storage of certain parts in containers.

MODULE:NEEDS[KAS] for the module

KASModuleContainer

Specifies that this part can serve as a container for other parts, and how much storage space the part has. Also included is an interaction distance. Kerbals must be this close or closer to open the container. Lots of sounds.

variable	example	definition
maxSize	5 20 80	specifies the size of the container relative to Kerbal Attachment System parts.
maxOpenDistance	1 5	Kerbals must be at least this close (in meters) in order to open the container
sndStorePath	KAS/Sounds/hookBayStore	sound stuff
sndOpenPath	KAS/Sounds/containerOpen	sound stuff for opening the container
sndClosePath	KAS/Sounds/containerClose	sound stuff for closing the container
bipWrongSndPath	KAS/Sounds/bipwrong	sound stuff

MODULE
{
 name = KASModuleContainer
 maxSize = 80
}

ModuleConnectedLivingSpace

variable	example	definition
passable	true false	specifies whether Kerbals can commute to parts connected to this part
passableWhenSurfaceAttached	true false	can be passed through even when connected to the ground?

MODULE
{
 name = ModuleConnectedLivingSpace
 passable = true
 passableWhenSurfaceAttached = true 
}

KASModuleGrab

variable	example	definition
evaPartPos	(0.0, 0.40, -0.40) (0.0, 0.0, -0.15)	three dimensional array, offset for carrying
evaPartDir	(0,0,-1)	three dimensional array for orientation
storable	true false	specifies whether the part can be stored
storedSize	20 14	specifies whether the part can be stored
attachOnPart	true false	uncertain
attachOnEva	true false	unsure
attachOnStatic	True False	unsure
customGroundPos	True False	unsure
attachNodeName	bottom	unsure
dropPartPos	(0.0, -0.2, -0.7)	unsure
dropPartRot	(-10.0, 0.0, 0.0)	unsure
bayType	hookbay	unsure
bayNode	top	unsure
bayRot	(0.0., 0.0, 0.0)	something to do with rotation
attachSendMsgOnly	true false	unknown

MODULE
{
name = KASModuleGrab            
evaPartPos = (0.0, 0.40, -0.40)        
evaPartDir = (0,0,-1)
storable = true
storedSize  = 20
attachOnPart = true
attachOnEva = true
bayType = hookBay
bayNode = top
bayRot = (0.0, 0.0, 0.0)
}

KASModulePartBay

variable

example

definition

BAY

{}

attachNode	top bottom	attachment placement
type	containerA container hookBay

MODULE
{
 name = KASModulePartBay
 BAY
 {
  attachNode = top
  type = containerA
  type = containerB
 }
}

KASModulePort

variable	example	definition
attachNode	top	unsure
nodeType	kasplug	unknown
breakForce	30	unknown
nodeTransformName	plugNode	unknown

MODULE
{
 name = KASModulePort
 attachNode = top
 nodeType = kasplug
 breakForce = 30
 nodeTransformName = plugNode
}

KASModuleAnchor

variable	example	definition This module will set a custom drag value when the part touch the ground.
groundDrag	500	Drag value of the anchor when it touch the ground
bounciness	0	Bounciness of the anchor
dynamicFriction	0.8	Dynamic friction of the anchor when it touch the ground
staticFriction	0.8	Static friction of the anchor when it touch the ground

MODULE
{
 name = KASModuleAnchor
 groundDrag = 500
 bounciness = 0
 dynamicFriction = 0.8 
 staticFriction = 0.8
}

KASModuleMagnet

This module will make the part acting like a magnet, collided part will be automatically attached. Only work when attached on a winch.

variable	example	definition
breakForce	10	The force that needs to be applied on the magnet joint to break.
attachToEva	true false	Disable/enable attraction of eva
minFwdDot	0.998	Minimum magnet alignement needed to attach (1 is perfectly aligned)
powerDrain	4	Power consumption when the magnet is used

MODULE
{
 name = KASModuleMagnet
 breakForce = 10
 attachToEva = False
 minFwdDot = 0.998
 powerDrain = 4
}

KASModuleStrut

variable	example	definition
nodeTransform	pipeNode strutNode	unknown
type	PipeSize1 StrutSize1	Unkown
maxLength	20 8	unknown
maxAngle	100	unknown
breakForce	10	unknown
allowDock	true false	unknown
allowPumpFuel	true false	unknown
hasCollider	true false	unknown
tubeScale	0.15	unknown
jointScale	0.15	unknown
textureTiling	1 4	unknown
tubeSrcType	Joined Rounded	Unknown
tubeTgtType	Joined Rounded	unknown
evaStrutPos	(0.05, 0.059, -0.21)	unknown
evaStrutRot	(190.0, 0.0, 0.0)	unknown
tubeTexPath	KAS/Textures/pipe	unknown

MODULE
{
 name = KASModuleStrut 
 nodeTransform = pipeNode
 type = PipeSize1 
 maxLenght = 20
 maxAngle = 100
 breakForce = 10
 allowDock = true
 allowPumpFuel = true
 hasCollider = false
 tubeScale = 0.15
 jointScale = 0.15
 textureTiling = 1
 tubeSrcType = Joined
 tubeTgtType = Joined
 evaStrutPos = (0.05, 0.059, -0.21)
 evaStrutRot = (190.0, 0.0, 0.0)
        tubeTexPath = KAS/Textures/pipe
}

KASModuleGrapplingHook

This module will make the part acting like a grappling-hook, any collided part in front of the grapple will be automatically attached if the inpact is strong enough. Only work when attached on a winch.

variable	example	definition
partBreakForce	6	The force that needs to be applied on the grapple/part joint to break.
staticBreakForce	15	The force that needs to be applied on the grapple/static joint to break.
aboveDist	0.05	Distance from the attach point to the center of the part
forceNeeded	4	Collision force needed to attach the grapple.
attachToPart	true false	Disable/enable attachment on parts.
rayDir	(0,-1,0)	Direction of the attach raycast. Attachment will be done only with objects in that direction.
rayLenght	0.8	Attach ray lenght.

MODULE
{
 name = KASModuleGrapplingHook
 partBreakForce = 6
 staticBreakForce = 15
 aboveDist = 0.05
 forceNeeded = 4
 attachToPart = true
 rayDir = (0,-1,0) 
 rayLenght = 0.8
}

KASModuleWinch

variable	example	definition
maxLenght	50 80	unknown
cableSpring	1000
cableDamper	0.1
cableWidth	0.04
motorMaxSpeed	2
motorAcceleration	0.05
powerDrain	0.5 0.3
headTransformName	head
headPortNodeName	portNode
connectedPortNodeName	bottom front
anchorNodeName	anchorNode
evaGrabHeadPos	(0.05, 0.01, -0.11)
evaGrabHeadDir	(0,0,1)
evaDropHeadPos	(0.05, 0.01, -0.16)
evaDropHeadRot	(180.0, 0.0, 0.0)
ejectEnabled	true false
ejectForce	20
lockMinDist	0.12
lockMinFwdDot	0.90

MODULE
{
 name = KASModuleWinch
 maxLenght = 50
 cableSpring = 1000
 cableDamper = 0.1
 cableWidth = 0.04
 motorMaxSpeed = 2
 motorAcceleration = 0.05
 powerDrain = 0.5
 headTransformName = head
 headPortNodeName = portNode
 connectedPortNodeName = bottom
 anchorNodeName = anchorNode
 evaGrabHeadPos = (0.05, 0.01, -0.11)
 evaGrabHeadDir = (0,0,1)
 evaDropHeadPos = (0.05, 0.01, -0.16)
 evaDropHeadRot = (180.0, 0.0, 0.0)
 ejectEnabled = true
 ejectForce = 20
 lockMinDist = 0.12
 lockMinFwdDot = 0.90
}

Universal Storage

Universal Storage. By the by: Excellently documented!

ModuleAnimator

Animation module.

variable	example	definition
animationName	Take 001	Name of the animation from the model.
guiEnableName	Wedge Locks Off	Part tooltip name to display for deployment
guiDisableName	Wedge Locks Off	Part tooltip name to display for retraction
actionEnableName	Wedge Locks Off	Action group name for deployment
actionDisableName	Wedge Locks On	Action group name for retraction
animationSpeed	100000	Speed of the animation
oneShot	true false	If the animation can only be played once
activeEditor	true false	If the part toolitp is visible in the editor
activeFlight	true false	If the part tooltip is visible in flight
activeUnfocused	true false	If the part tooltip is visible from EVA
unfocusedRange	5	EVA visible range

 MODULE
 {
  name = ModuleAnimator
  animationName = Take 001
  guiEnableName = Wedge Locks Off
  guiDisableName = Wedge Locks On
  actionEnableName = Wedge Locks Off 
  actionDisableName = Wedge Locks On 
  
  animationSpeed = 100000
  oneShot = false
  activeEditor = true
  activeFlight = false
  activeUnfocused = false
  unfocusedRange = 5
 }

ModuleConnectedLivingSpace

variable	example	definition
passable	true false	specifies whether Kerbals can commute to parts connected to this part
passableWhenSurfaceAttached	true false	can be passed through even when connected to the ground?

MODULE
{
 name = ModuleConnectedLivingSpace
 passable = true
 passableWhenSurfaceAttached = true 
}

KASModuleGrab

variable	example	definition
evaPartPos	(0.0, 0.40, -0.40) (0.0, 0.0, -0.15)	three dimensional array, offset for carrying
evaPartDir	(0,0,-1)	three dimensional array for orientation
storable	true false	specifies whether the part can be stored
storedSize	20 14	specifies whether the part can be stored
attachOnPart	true false	uncertain
attachOnEva	true false	unsure
attachOnStatic	True False	unsure
customGroundPos	True False	unsure
attachNodeName	bottom	unsure
dropPartPos	(0.0, -0.2, -0.7)	unsure
dropPartRot	(-10.0, 0.0, 0.0)	unsure
bayType	hookbay	unsure
bayNode	top	unsure
bayRot	(0.0., 0.0, 0.0)	something to do with rotation
attachSendMsgOnly	true false	unknown

MODULE
{
name = KASModuleGrab            
evaPartPos = (0.0, 0.40, -0.40)        
evaPartDir = (0,0,-1)
storable = true
storedSize  = 20
attachOnPart = true
attachOnEva = true
bayType = hookBay
bayNode = top
bayRot = (0.0, 0.0, 0.0)
}

KASModulePartBay

variable

example

definition

BAY

{}

attachNode	top bottom	attachment placement
type	containerA container hookBay

MODULE
{
 name = KASModulePartBay
 BAY
 {
  attachNode = top
  type = containerA
  type = containerB
 }
}

KASModulePort

variable	example	definition
attachNode	top	unsure
nodeType	kasplug	unknown
breakForce	30	unknown
nodeTransformName	plugNode	unknown

MODULE
{
 name = KASModulePort
 attachNode = top
 nodeType = kasplug
 breakForce = 30
 nodeTransformName = plugNode
}

KASModuleAnchor

variable	example	definition This module will set a custom drag value when the part touch the ground.
groundDrag	500	Drag value of the anchor when it touch the ground
bounciness	0	Bounciness of the anchor
dynamicFriction	0.8	Dynamic friction of the anchor when it touch the ground
staticFriction	0.8	Static friction of the anchor when it touch the ground

MODULE
{
 name = KASModuleAnchor
 groundDrag = 500
 bounciness = 0
 dynamicFriction = 0.8 
 staticFriction = 0.8
}

KASModuleMagnet

This module will make the part acting like a magnet, collided part will be automatically attached. Only work when attached on a winch.

variable	example	definition
breakForce	10	The force that needs to be applied on the magnet joint to break.
attachToEva	true false	Disable/enable attraction of eva
minFwdDot	0.998	Minimum magnet alignement needed to attach (1 is perfectly aligned)
powerDrain	4	Power consumption when the magnet is used

MODULE
{
 name = KASModuleMagnet
 breakForce = 10
 attachToEva = False
 minFwdDot = 0.998
 powerDrain = 4
}

KASModuleStrut

variable	example	definition
nodeTransform	pipeNode strutNode	unknown
type	PipeSize1 StrutSize1	Unkown
maxLength	20 8	unknown
maxAngle	100	unknown
breakForce	10	unknown
allowDock	true false	unknown
allowPumpFuel	true false	unknown
hasCollider	true false	unknown
tubeScale	0.15	unknown
jointScale	0.15	unknown
textureTiling	1 4	unknown
tubeSrcType	Joined Rounded	Unknown
tubeTgtType	Joined Rounded	unknown
evaStrutPos	(0.05, 0.059, -0.21)	unknown
evaStrutRot	(190.0, 0.0, 0.0)	unknown
tubeTexPath	KAS/Textures/pipe	unknown

MODULE
{
 name = KASModuleStrut 
 nodeTransform = pipeNode
 type = PipeSize1 
 maxLenght = 20
 maxAngle = 100
 breakForce = 10
 allowDock = true
 allowPumpFuel = true
 hasCollider = false
 tubeScale = 0.15
 jointScale = 0.15
 textureTiling = 1
 tubeSrcType = Joined
 tubeTgtType = Joined
 evaStrutPos = (0.05, 0.059, -0.21)
 evaStrutRot = (190.0, 0.0, 0.0)
        tubeTexPath = KAS/Textures/pipe
}

KASModuleGrapplingHook

This module will make the part acting like a grappling-hook, any collided part in front of the grapple will be automatically attached if the inpact is strong enough. Only work when attached on a winch.

variable	example	definition
partBreakForce	6	The force that needs to be applied on the grapple/part joint to break.
staticBreakForce	15	The force that needs to be applied on the grapple/static joint to break.
aboveDist	0.05	Distance from the attach point to the center of the part
forceNeeded	4	Collision force needed to attach the grapple.
attachToPart	true false	Disable/enable attachment on parts.
rayDir	(0,-1,0)	Direction of the attach raycast. Attachment will be done only with objects in that direction.
rayLenght	0.8	Attach ray lenght.

MODULE
{
 name = KASModuleGrapplingHook
 partBreakForce = 6
 staticBreakForce = 15
 aboveDist = 0.05
 forceNeeded = 4
 attachToPart = true
 rayDir = (0,-1,0) 
 rayLenght = 0.8
}

KASModuleWinch

variable	example	definition
maxLenght	50 80	unknown
cableSpring	1000
cableDamper	0.1
cableWidth	0.04
motorMaxSpeed	2
motorAcceleration	0.05
powerDrain	0.5 0.3
headTransformName	head
headPortNodeName	portNode
connectedPortNodeName	bottom front
anchorNodeName	anchorNode
evaGrabHeadPos	(0.05, 0.01, -0.11)
evaGrabHeadDir	(0,0,1)
evaDropHeadPos	(0.05, 0.01, -0.16)
evaDropHeadRot	(180.0, 0.0, 0.0)
ejectEnabled	true false
ejectForce	20
lockMinDist	0.12
lockMinFwdDot	0.90

MODULE
{
 name = KASModuleWinch
 maxLenght = 50
 cableSpring = 1000
 cableDamper = 0.1
 cableWidth = 0.04
 motorMaxSpeed = 2
 motorAcceleration = 0.05
 powerDrain = 0.5
 headTransformName = head
 headPortNodeName = portNode
 connectedPortNodeName = bottom
 anchorNodeName = anchorNode
 evaGrabHeadPos = (0.05, 0.01, -0.11)
 evaGrabHeadDir = (0,0,1)
 evaDropHeadPos = (0.05, 0.01, -0.16)
 evaDropHeadRot = (180.0, 0.0, 0.0)
 ejectEnabled = true
 ejectForce = 20
 lockMinDist = 0.12
 lockMinFwdDot = 0.90
}

Kerbal Assembly System

Kerbal Assembly System is most noted for adding the option to grab and move parts using Kerbals. It also allows for storage of certain parts in containers.

MODULE:NEEDS[KAS] for the module

KASModuleContainer

Specifies that this part can serve as a container for other parts, and how much storage space the part has. Also included is an interaction distance. Kerbals must be this close or closer to open the container. Lots of sounds.

variable	example	definition
maxSize	5 20 80	specifies the size of the container relative to Kerbal Attachment System parts.
maxOpenDistance	1 5	Kerbals must be at least this close (in meters) in order to open the container
sndStorePath	KAS/Sounds/hookBayStore	sound stuff
sndOpenPath	KAS/Sounds/containerOpen	sound stuff for opening the container
sndClosePath	KAS/Sounds/containerClose	sound stuff for closing the container
bipWrongSndPath	KAS/Sounds/bipwrong	sound stuff

MODULE
{
 name = KASModuleContainer
 maxSize = 80
}

ModuleConnectedLivingSpace

variable	example	definition
passable	true false	specifies whether Kerbals can commute to parts connected to this part
passableWhenSurfaceAttached	true false	can be passed through even when connected to the ground?

MODULE
{
 name = ModuleConnectedLivingSpace
 passable = true
 passableWhenSurfaceAttached = true 
}

KASModuleGrab

variable	example	definition
evaPartPos	(0.0, 0.40, -0.40) (0.0, 0.0, -0.15)	three dimensional array, offset for carrying
evaPartDir	(0,0,-1)	three dimensional array for orientation
storable	true false	specifies whether the part can be stored
storedSize	20 14	specifies whether the part can be stored
attachOnPart	true false	uncertain
attachOnEva	true false	unsure
attachOnStatic	True False	unsure
customGroundPos	True False	unsure
attachNodeName	bottom	unsure
dropPartPos	(0.0, -0.2, -0.7)	unsure
dropPartRot	(-10.0, 0.0, 0.0)	unsure
bayType	hookbay	unsure
bayNode	top	unsure
bayRot	(0.0., 0.0, 0.0)	something to do with rotation
attachSendMsgOnly	true false	unknown

MODULE
{
name = KASModuleGrab            
evaPartPos = (0.0, 0.40, -0.40)        
evaPartDir = (0,0,-1)
storable = true
storedSize  = 20
attachOnPart = true
attachOnEva = true
bayType = hookBay
bayNode = top
bayRot = (0.0, 0.0, 0.0)
}

KASModulePartBay

variable

example

definition

BAY

{}

attachNode	top bottom	attachment placement
type	containerA container hookBay

MODULE
{
 name = KASModulePartBay
 BAY
 {
  attachNode = top
  type = containerA
  type = containerB
 }
}

KASModulePort

variable	example	definition
attachNode	top	unsure
nodeType	kasplug	unknown
breakForce	30	unknown
nodeTransformName	plugNode	unknown

MODULE
{
 name = KASModulePort
 attachNode = top
 nodeType = kasplug
 breakForce = 30
 nodeTransformName = plugNode
}

KASModuleAnchor

variable	example	definition This module will set a custom drag value when the part touch the ground.
groundDrag	500	Drag value of the anchor when it touch the ground
bounciness	0	Bounciness of the anchor
dynamicFriction	0.8	Dynamic friction of the anchor when it touch the ground
staticFriction	0.8	Static friction of the anchor when it touch the ground

MODULE
{
 name = KASModuleAnchor
 groundDrag = 500
 bounciness = 0
 dynamicFriction = 0.8 
 staticFriction = 0.8
}

KASModuleMagnet

This module will make the part acting like a magnet, collided part will be automatically attached. Only work when attached on a winch.

variable	example	definition
breakForce	10	The force that needs to be applied on the magnet joint to break.
attachToEva	true false	Disable/enable attraction of eva
minFwdDot	0.998	Minimum magnet alignement needed to attach (1 is perfectly aligned)
powerDrain	4	Power consumption when the magnet is used

MODULE
{
 name = KASModuleMagnet
 breakForce = 10
 attachToEva = False
 minFwdDot = 0.998
 powerDrain = 4
}

KASModuleStrut

variable	example	definition
nodeTransform	pipeNode strutNode	unknown
type	PipeSize1 StrutSize1	Unkown
maxLength	20 8	unknown
maxAngle	100	unknown
breakForce	10	unknown
allowDock	true false	unknown
allowPumpFuel	true false	unknown
hasCollider	true false	unknown
tubeScale	0.15	unknown
jointScale	0.15	unknown
textureTiling	1 4	unknown
tubeSrcType	Joined Rounded	Unknown
tubeTgtType	Joined Rounded	unknown
evaStrutPos	(0.05, 0.059, -0.21)	unknown
evaStrutRot	(190.0, 0.0, 0.0)	unknown
tubeTexPath	KAS/Textures/pipe	unknown

MODULE
{
 name = KASModuleStrut 
 nodeTransform = pipeNode
 type = PipeSize1 
 maxLenght = 20
 maxAngle = 100
 breakForce = 10
 allowDock = true
 allowPumpFuel = true
 hasCollider = false
 tubeScale = 0.15
 jointScale = 0.15
 textureTiling = 1
 tubeSrcType = Joined
 tubeTgtType = Joined
 evaStrutPos = (0.05, 0.059, -0.21)
 evaStrutRot = (190.0, 0.0, 0.0)
        tubeTexPath = KAS/Textures/pipe
}

KASModuleGrapplingHook

This module will make the part acting like a grappling-hook, any collided part in front of the grapple will be automatically attached if the inpact is strong enough. Only work when attached on a winch.

variable	example	definition
partBreakForce	6	The force that needs to be applied on the grapple/part joint to break.
staticBreakForce	15	The force that needs to be applied on the grapple/static joint to break.
aboveDist	0.05	Distance from the attach point to the center of the part
forceNeeded	4	Collision force needed to attach the grapple.
attachToPart	true false	Disable/enable attachment on parts.
rayDir	(0,-1,0)	Direction of the attach raycast. Attachment will be done only with objects in that direction.
rayLenght	0.8	Attach ray lenght.

MODULE
{
 name = KASModuleGrapplingHook
 partBreakForce = 6
 staticBreakForce = 15
 aboveDist = 0.05
 forceNeeded = 4
 attachToPart = true
 rayDir = (0,-1,0) 
 rayLenght = 0.8
}

KASModuleWinch

variable	example	definition
maxLenght	50 80	unknown
cableSpring	1000
cableDamper	0.1
cableWidth	0.04
motorMaxSpeed	2
motorAcceleration	0.05
powerDrain	0.5 0.3
headTransformName	head
headPortNodeName	portNode
connectedPortNodeName	bottom front
anchorNodeName	anchorNode
evaGrabHeadPos	(0.05, 0.01, -0.11)
evaGrabHeadDir	(0,0,1)
evaDropHeadPos	(0.05, 0.01, -0.16)
evaDropHeadRot	(180.0, 0.0, 0.0)
ejectEnabled	true false
ejectForce	20
lockMinDist	0.12
lockMinFwdDot	0.90

MODULE
{
 name = KASModuleWinch
 maxLenght = 50
 cableSpring = 1000
 cableDamper = 0.1
 cableWidth = 0.04
 motorMaxSpeed = 2
 motorAcceleration = 0.05
 powerDrain = 0.5
 headTransformName = head
 headPortNodeName = portNode
 connectedPortNodeName = bottom
 anchorNodeName = anchorNode
 evaGrabHeadPos = (0.05, 0.01, -0.11)
 evaGrabHeadDir = (0,0,1)
 evaDropHeadPos = (0.05, 0.01, -0.16)
 evaDropHeadRot = (180.0, 0.0, 0.0)
 ejectEnabled = true
 ejectForce = 20
 lockMinDist = 0.12
 lockMinFwdDot = 0.90
}

Kerbal Assembly System

Kerbal Assembly System is most noted for adding the option to grab and move parts using Kerbals. It also allows for storage of certain parts in containers.

MODULE:NEEDS[KAS] for the module

KASModuleContainer

Specifies that this part can serve as a container for other parts, and how much storage space the part has. Also included is an interaction distance. Kerbals must be this close or closer to open the container. Lots of sounds.

variable	example	definition
maxSize	5 20 80	specifies the size of the container relative to Kerbal Attachment System parts.
maxOpenDistance	1 5	Kerbals must be at least this close (in meters) in order to open the container
sndStorePath	KAS/Sounds/hookBayStore	sound stuff
sndOpenPath	KAS/Sounds/containerOpen	sound stuff for opening the container
sndClosePath	KAS/Sounds/containerClose	sound stuff for closing the container
bipWrongSndPath	KAS/Sounds/bipwrong	sound stuff

MODULE
{
 name = KASModuleContainer
 maxSize = 80
}

ModuleConnectedLivingSpace

variable	example	definition
passable	true false	specifies whether Kerbals can commute to parts connected to this part
passableWhenSurfaceAttached	true false	can be passed through even when connected to the ground?

MODULE
{
 name = ModuleConnectedLivingSpace
 passable = true
 passableWhenSurfaceAttached = true 
}

KASModuleGrab

variable	example	definition
evaPartPos	(0.0, 0.40, -0.40) (0.0, 0.0, -0.15)	three dimensional array, offset for carrying
evaPartDir	(0,0,-1)	three dimensional array for orientation
storable	true false	specifies whether the part can be stored
storedSize	20 14	specifies whether the part can be stored
attachOnPart	true false	uncertain
attachOnEva	true false	unsure
attachOnStatic	True False	unsure
customGroundPos	True False	unsure
attachNodeName	bottom	unsure
dropPartPos	(0.0, -0.2, -0.7)	unsure
dropPartRot	(-10.0, 0.0, 0.0)	unsure
bayType	hookbay	unsure
bayNode	top	unsure
bayRot	(0.0., 0.0, 0.0)	something to do with rotation
attachSendMsgOnly	true false	unknown

MODULE
{
name = KASModuleGrab            
evaPartPos = (0.0, 0.40, -0.40)        
evaPartDir = (0,0,-1)
storable = true
storedSize  = 20
attachOnPart = true
attachOnEva = true
bayType = hookBay
bayNode = top
bayRot = (0.0, 0.0, 0.0)
}

KASModulePartBay

variable

example

definition

BAY

{}

attachNode	top bottom	attachment placement
type	containerA container hookBay

MODULE
{
 name = KASModulePartBay
 BAY
 {
  attachNode = top
  type = containerA
  type = containerB
 }
}

KASModulePort

variable	example	definition
attachNode	top	unsure
nodeType	kasplug	unknown
breakForce	30	unknown
nodeTransformName	plugNode	unknown

MODULE
{
 name = KASModulePort
 attachNode = top
 nodeType = kasplug
 breakForce = 30
 nodeTransformName = plugNode
}

KASModuleAnchor

variable	example	definition This module will set a custom drag value when the part touch the ground.
groundDrag	500	Drag value of the anchor when it touch the ground
bounciness	0	Bounciness of the anchor
dynamicFriction	0.8	Dynamic friction of the anchor when it touch the ground
staticFriction	0.8	Static friction of the anchor when it touch the ground

MODULE
{
 name = KASModuleAnchor
 groundDrag = 500
 bounciness = 0
 dynamicFriction = 0.8 
 staticFriction = 0.8
}

KASModuleMagnet

This module will make the part acting like a magnet, collided part will be automatically attached. Only work when attached on a winch.

variable	example	definition
breakForce	10	The force that needs to be applied on the magnet joint to break.
attachToEva	true false	Disable/enable attraction of eva
minFwdDot	0.998	Minimum magnet alignement needed to attach (1 is perfectly aligned)
powerDrain	4	Power consumption when the magnet is used

MODULE
{
 name = KASModuleMagnet
 breakForce = 10
 attachToEva = False
 minFwdDot = 0.998
 powerDrain = 4
}

KASModuleStrut

variable	example	definition
nodeTransform	pipeNode strutNode	unknown
type	PipeSize1 StrutSize1	Unkown
maxLength	20 8	unknown
maxAngle	100	unknown
breakForce	10	unknown
allowDock	true false	unknown
allowPumpFuel	true false	unknown
hasCollider	true false	unknown
tubeScale	0.15	unknown
jointScale	0.15	unknown
textureTiling	1 4	unknown
tubeSrcType	Joined Rounded	Unknown
tubeTgtType	Joined Rounded	unknown
evaStrutPos	(0.05, 0.059, -0.21)	unknown
evaStrutRot	(190.0, 0.0, 0.0)	unknown
tubeTexPath	KAS/Textures/pipe	unknown

MODULE
{
 name = KASModuleStrut 
 nodeTransform = pipeNode
 type = PipeSize1 
 maxLenght = 20
 maxAngle = 100
 breakForce = 10
 allowDock = true
 allowPumpFuel = true
 hasCollider = false
 tubeScale = 0.15
 jointScale = 0.15
 textureTiling = 1
 tubeSrcType = Joined
 tubeTgtType = Joined
 evaStrutPos = (0.05, 0.059, -0.21)
 evaStrutRot = (190.0, 0.0, 0.0)
        tubeTexPath = KAS/Textures/pipe
}

KASModuleGrapplingHook

This module will make the part acting like a grappling-hook, any collided part in front of the grapple will be automatically attached if the inpact is strong enough. Only work when attached on a winch.

variable	example	definition
partBreakForce	6	The force that needs to be applied on the grapple/part joint to break.
staticBreakForce	15	The force that needs to be applied on the grapple/static joint to break.
aboveDist	0.05	Distance from the attach point to the center of the part
forceNeeded	4	Collision force needed to attach the grapple.
attachToPart	true false	Disable/enable attachment on parts.
rayDir	(0,-1,0)	Direction of the attach raycast. Attachment will be done only with objects in that direction.
rayLenght	0.8	Attach ray lenght.

MODULE
{
 name = KASModuleGrapplingHook
 partBreakForce = 6
 staticBreakForce = 15
 aboveDist = 0.05
 forceNeeded = 4
 attachToPart = true
 rayDir = (0,-1,0) 
 rayLenght = 0.8
}

KASModuleWinch

variable	example	definition
maxLenght	50 80	unknown
cableSpring	1000
cableDamper	0.1
cableWidth	0.04
motorMaxSpeed	2
motorAcceleration	0.05
powerDrain	0.5 0.3
headTransformName	head
headPortNodeName	portNode
connectedPortNodeName	bottom front
anchorNodeName	anchorNode
evaGrabHeadPos	(0.05, 0.01, -0.11)
evaGrabHeadDir	(0,0,1)
evaDropHeadPos	(0.05, 0.01, -0.16)
evaDropHeadRot	(180.0, 0.0, 0.0)
ejectEnabled	true false
ejectForce	20
lockMinDist	0.12
lockMinFwdDot	0.90

MODULE
{
 name = KASModuleWinch
 maxLenght = 50
 cableSpring = 1000
 cableDamper = 0.1
 cableWidth = 0.04
 motorMaxSpeed = 2
 motorAcceleration = 0.05
 powerDrain = 0.5
 headTransformName = head
 headPortNodeName = portNode
 connectedPortNodeName = bottom
 anchorNodeName = anchorNode
 evaGrabHeadPos = (0.05, 0.01, -0.11)
 evaGrabHeadDir = (0,0,1)
 evaDropHeadPos = (0.05, 0.01, -0.16)
 evaDropHeadRot = (180.0, 0.0, 0.0)
 ejectEnabled = true
 ejectForce = 20
 lockMinDist = 0.12
 lockMinFwdDot = 0.90
}

Kerbal Assembly System

Kerbal Assembly System is most noted for adding the option to grab and move parts using Kerbals. It also allows for storage of certain parts in containers.

MODULE:NEEDS[KAS] for the module

KASModuleContainer

Specifies that this part can serve as a container for other parts, and how much storage space the part has. Also included is an interaction distance. Kerbals must be this close or closer to open the container. Lots of sounds.

variable	example	definition
maxSize	5 20 80	specifies the size of the container relative to Kerbal Attachment System parts.
maxOpenDistance	1 5	Kerbals must be at least this close (in meters) in order to open the container
sndStorePath	KAS/Sounds/hookBayStore	sound stuff
sndOpenPath	KAS/Sounds/containerOpen	sound stuff for opening the container
sndClosePath	KAS/Sounds/containerClose	sound stuff for closing the container
bipWrongSndPath	KAS/Sounds/bipwrong	sound stuff

MODULE
{
 name = KASModuleContainer
 maxSize = 80
}

ModuleConnectedLivingSpace

variable	example	definition
passable	true false	specifies whether Kerbals can commute to parts connected to this part
passableWhenSurfaceAttached	true false	can be passed through even when connected to the ground?

MODULE
{
 name = ModuleConnectedLivingSpace
 passable = true
 passableWhenSurfaceAttached = true 
}

KASModuleGrab

variable	example	definition
evaPartPos	(0.0, 0.40, -0.40) (0.0, 0.0, -0.15)	three dimensional array, offset for carrying
evaPartDir	(0,0,-1)	three dimensional array for orientation
storable	true false	specifies whether the part can be stored
storedSize	20 14	specifies whether the part can be stored
attachOnPart	true false	uncertain
attachOnEva	true false	unsure
attachOnStatic	True False	unsure
customGroundPos	True False	unsure
attachNodeName	bottom	unsure
dropPartPos	(0.0, -0.2, -0.7)	unsure
dropPartRot	(-10.0, 0.0, 0.0)	unsure
bayType	hookbay	unsure
bayNode	top	unsure
bayRot	(0.0., 0.0, 0.0)	something to do with rotation
attachSendMsgOnly	true false	unknown

MODULE
{
name = KASModuleGrab            
evaPartPos = (0.0, 0.40, -0.40)        
evaPartDir = (0,0,-1)
storable = true
storedSize  = 20
attachOnPart = true
attachOnEva = true
bayType = hookBay
bayNode = top
bayRot = (0.0, 0.0, 0.0)
}

KASModulePartBay

variable

example

definition

BAY

{}

attachNode	top bottom	attachment placement
type	containerA container hookBay

MODULE
{
 name = KASModulePartBay
 BAY
 {
  attachNode = top
  type = containerA
  type = containerB
 }
}

KASModulePort

variable	example	definition
attachNode	top	unsure
nodeType	kasplug	unknown
breakForce	30	unknown
nodeTransformName	plugNode	unknown

MODULE
{
 name = KASModulePort
 attachNode = top
 nodeType = kasplug
 breakForce = 30
 nodeTransformName = plugNode
}

KASModuleAnchor

variable	example	definition This module will set a custom drag value when the part touch the ground.
groundDrag	500	Drag value of the anchor when it touch the ground
bounciness	0	Bounciness of the anchor
dynamicFriction	0.8	Dynamic friction of the anchor when it touch the ground
staticFriction	0.8	Static friction of the anchor when it touch the ground

MODULE
{
 name = KASModuleAnchor
 groundDrag = 500
 bounciness = 0
 dynamicFriction = 0.8 
 staticFriction = 0.8
}

KASModuleMagnet

This module will make the part acting like a magnet, collided part will be automatically attached. Only work when attached on a winch.

variable	example	definition
breakForce	10	The force that needs to be applied on the magnet joint to break.
attachToEva	true false	Disable/enable attraction of eva
minFwdDot	0.998	Minimum magnet alignement needed to attach (1 is perfectly aligned)
powerDrain	4	Power consumption when the magnet is used

MODULE
{
 name = KASModuleMagnet
 breakForce = 10
 attachToEva = False
 minFwdDot = 0.998
 powerDrain = 4
}

KASModuleStrut

variable	example	definition
nodeTransform	pipeNode strutNode	unknown
type	PipeSize1 StrutSize1	Unkown
maxLength	20 8	unknown
maxAngle	100	unknown
breakForce	10	unknown
allowDock	true false	unknown
allowPumpFuel	true false	unknown
hasCollider	true false	unknown
tubeScale	0.15	unknown
jointScale	0.15	unknown
textureTiling	1 4	unknown
tubeSrcType	Joined Rounded	Unknown
tubeTgtType	Joined Rounded	unknown
evaStrutPos	(0.05, 0.059, -0.21)	unknown
evaStrutRot	(190.0, 0.0, 0.0)	unknown
tubeTexPath	KAS/Textures/pipe	unknown

MODULE
{
 name = KASModuleStrut 
 nodeTransform = pipeNode
 type = PipeSize1 
 maxLenght = 20
 maxAngle = 100
 breakForce = 10
 allowDock = true
 allowPumpFuel = true
 hasCollider = false
 tubeScale = 0.15
 jointScale = 0.15
 textureTiling = 1
 tubeSrcType = Joined
 tubeTgtType = Joined
 evaStrutPos = (0.05, 0.059, -0.21)
 evaStrutRot = (190.0, 0.0, 0.0)
        tubeTexPath = KAS/Textures/pipe
}

KASModuleGrapplingHook

This module will make the part acting like a grappling-hook, any collided part in front of the grapple will be automatically attached if the inpact is strong enough. Only work when attached on a winch.

variable	example	definition
partBreakForce	6	The force that needs to be applied on the grapple/part joint to break.
staticBreakForce	15	The force that needs to be applied on the grapple/static joint to break.
aboveDist	0.05	Distance from the attach point to the center of the part
forceNeeded	4	Collision force needed to attach the grapple.
attachToPart	true false	Disable/enable attachment on parts.
rayDir	(0,-1,0)	Direction of the attach raycast. Attachment will be done only with objects in that direction.
rayLenght	0.8	Attach ray lenght.

MODULE
{
 name = KASModuleGrapplingHook
 partBreakForce = 6
 staticBreakForce = 15
 aboveDist = 0.05
 forceNeeded = 4
 attachToPart = true
 rayDir = (0,-1,0) 
 rayLenght = 0.8
}

KASModuleWinch

variable	example	definition
maxLenght	50 80	unknown
cableSpring	1000
cableDamper	0.1
cableWidth	0.04
motorMaxSpeed	2
motorAcceleration	0.05
powerDrain	0.5 0.3
headTransformName	head
headPortNodeName	portNode
connectedPortNodeName	bottom front
anchorNodeName	anchorNode
evaGrabHeadPos	(0.05, 0.01, -0.11)
evaGrabHeadDir	(0,0,1)
evaDropHeadPos	(0.05, 0.01, -0.16)
evaDropHeadRot	(180.0, 0.0, 0.0)
ejectEnabled	true false
ejectForce	20
lockMinDist	0.12
lockMinFwdDot	0.90

MODULE
{
 name = KASModuleWinch
 maxLenght = 50
 cableSpring = 1000
 cableDamper = 0.1
 cableWidth = 0.04
 motorMaxSpeed = 2
 motorAcceleration = 0.05
 powerDrain = 0.5
 headTransformName = head
 headPortNodeName = portNode
 connectedPortNodeName = bottom
 anchorNodeName = anchorNode
 evaGrabHeadPos = (0.05, 0.01, -0.11)
 evaGrabHeadDir = (0,0,1)
 evaDropHeadPos = (0.05, 0.01, -0.16)
 evaDropHeadRot = (180.0, 0.0, 0.0)
 ejectEnabled = true
 ejectForce = 20
 lockMinDist = 0.12
 lockMinFwdDot = 0.90
}

Kerbal Assembly System

Kerbal Assembly System is most noted for adding the option to grab and move parts using Kerbals. It also allows for storage of certain parts in containers.

MODULE:NEEDS[KAS] for the module

KASModuleContainer

Specifies that this part can serve as a container for other parts, and how much storage space the part has. Also included is an interaction distance. Kerbals must be this close or closer to open the container. Lots of sounds.

variable	example	definition
maxSize	5 20 80	specifies the size of the container relative to Kerbal Attachment System parts.
maxOpenDistance	1 5	Kerbals must be at least this close (in meters) in order to open the container
sndStorePath	KAS/Sounds/hookBayStore	sound stuff
sndOpenPath	KAS/Sounds/containerOpen	sound stuff for opening the container
sndClosePath	KAS/Sounds/containerClose	sound stuff for closing the container
bipWrongSndPath	KAS/Sounds/bipwrong	sound stuff

MODULE
{
 name = KASModuleContainer
 maxSize = 80
}

ModuleConnectedLivingSpace

variable	example	definition
passable	true false	specifies whether Kerbals can commute to parts connected to this part
passableWhenSurfaceAttached	true false	can be passed through even when connected to the ground?

MODULE
{
 name = ModuleConnectedLivingSpace
 passable = true
 passableWhenSurfaceAttached = true 
}

KASModuleGrab

variable	example	definition
evaPartPos	(0.0, 0.40, -0.40) (0.0, 0.0, -0.15)	three dimensional array, offset for carrying
evaPartDir	(0,0,-1)	three dimensional array for orientation
storable	true false	specifies whether the part can be stored
storedSize	20 14	specifies whether the part can be stored
attachOnPart	true false	uncertain
attachOnEva	true false	unsure
attachOnStatic	True False	unsure
customGroundPos	True False	unsure
attachNodeName	bottom	unsure
dropPartPos	(0.0, -0.2, -0.7)	unsure
dropPartRot	(-10.0, 0.0, 0.0)	unsure
bayType	hookbay	unsure
bayNode	top	unsure
bayRot	(0.0., 0.0, 0.0)	something to do with rotation
attachSendMsgOnly	true false	unknown

MODULE
{
name = KASModuleGrab            
evaPartPos = (0.0, 0.40, -0.40)        
evaPartDir = (0,0,-1)
storable = true
storedSize  = 20
attachOnPart = true
attachOnEva = true
bayType = hookBay
bayNode = top
bayRot = (0.0, 0.0, 0.0)
}

KASModulePartBay

variable

example

definition

BAY

{}

attachNode	top bottom	attachment placement
type	containerA container hookBay

MODULE
{
 name = KASModulePartBay
 BAY
 {
  attachNode = top
  type = containerA
  type = containerB
 }
}

KASModulePort

variable	example	definition
attachNode	top	unsure
nodeType	kasplug	unknown
breakForce	30	unknown
nodeTransformName	plugNode	unknown

MODULE
{
 name = KASModulePort
 attachNode = top
 nodeType = kasplug
 breakForce = 30
 nodeTransformName = plugNode
}

KASModuleAnchor

variable	example	definition This module will set a custom drag value when the part touch the ground.
groundDrag	500	Drag value of the anchor when it touch the ground
bounciness	0	Bounciness of the anchor
dynamicFriction	0.8	Dynamic friction of the anchor when it touch the ground
staticFriction	0.8	Static friction of the anchor when it touch the ground

MODULE
{
 name = KASModuleAnchor
 groundDrag = 500
 bounciness = 0
 dynamicFriction = 0.8 
 staticFriction = 0.8
}

KASModuleMagnet

This module will make the part acting like a magnet, collided part will be automatically attached. Only work when attached on a winch.

variable	example	definition
breakForce	10	The force that needs to be applied on the magnet joint to break.
attachToEva	true false	Disable/enable attraction of eva
minFwdDot	0.998	Minimum magnet alignement needed to attach (1 is perfectly aligned)
powerDrain	4	Power consumption when the magnet is used

MODULE
{
 name = KASModuleMagnet
 breakForce = 10
 attachToEva = False
 minFwdDot = 0.998
 powerDrain = 4
}

KASModuleStrut

variable	example	definition
nodeTransform	pipeNode strutNode	unknown
type	PipeSize1 StrutSize1	Unkown
maxLength	20 8	unknown
maxAngle	100	unknown
breakForce	10	unknown
allowDock	true false	unknown
allowPumpFuel	true false	unknown
hasCollider	true false	unknown
tubeScale	0.15	unknown
jointScale	0.15	unknown
textureTiling	1 4	unknown
tubeSrcType	Joined Rounded	Unknown
tubeTgtType	Joined Rounded	unknown
evaStrutPos	(0.05, 0.059, -0.21)	unknown
evaStrutRot	(190.0, 0.0, 0.0)	unknown
tubeTexPath	KAS/Textures/pipe	unknown

MODULE
{
 name = KASModuleStrut 
 nodeTransform = pipeNode
 type = PipeSize1 
 maxLenght = 20
 maxAngle = 100
 breakForce = 10
 allowDock = true
 allowPumpFuel = true
 hasCollider = false
 tubeScale = 0.15
 jointScale = 0.15
 textureTiling = 1
 tubeSrcType = Joined
 tubeTgtType = Joined
 evaStrutPos = (0.05, 0.059, -0.21)
 evaStrutRot = (190.0, 0.0, 0.0)
        tubeTexPath = KAS/Textures/pipe
}

KASModuleGrapplingHook

This module will make the part acting like a grappling-hook, any collided part in front of the grapple will be automatically attached if the inpact is strong enough. Only work when attached on a winch.

variable	example	definition
partBreakForce	6	The force that needs to be applied on the grapple/part joint to break.
staticBreakForce	15	The force that needs to be applied on the grapple/static joint to break.
aboveDist	0.05	Distance from the attach point to the center of the part
forceNeeded	4	Collision force needed to attach the grapple.
attachToPart	true false	Disable/enable attachment on parts.
rayDir	(0,-1,0)	Direction of the attach raycast. Attachment will be done only with objects in that direction.
rayLenght	0.8	Attach ray lenght.

MODULE
{
 name = KASModuleGrapplingHook
 partBreakForce = 6
 staticBreakForce = 15
 aboveDist = 0.05
 forceNeeded = 4
 attachToPart = true
 rayDir = (0,-1,0) 
 rayLenght = 0.8
}

KASModuleWinch

variable	example	definition
maxLenght	50 80	unknown
cableSpring	1000
cableDamper	0.1
cableWidth	0.04
motorMaxSpeed	2
motorAcceleration	0.05
powerDrain	0.5 0.3
headTransformName	head
headPortNodeName	portNode
connectedPortNodeName	bottom front
anchorNodeName	anchorNode
evaGrabHeadPos	(0.05, 0.01, -0.11)
evaGrabHeadDir	(0,0,1)
evaDropHeadPos	(0.05, 0.01, -0.16)
evaDropHeadRot	(180.0, 0.0, 0.0)
ejectEnabled	true false
ejectForce	20
lockMinDist	0.12
lockMinFwdDot	0.90

MODULE
{
 name = KASModuleWinch
 maxLenght = 50
 cableSpring = 1000
 cableDamper = 0.1
 cableWidth = 0.04
 motorMaxSpeed = 2
 motorAcceleration = 0.05
 powerDrain = 0.5
 headTransformName = head
 headPortNodeName = portNode
 connectedPortNodeName = bottom
 anchorNodeName = anchorNode
 evaGrabHeadPos = (0.05, 0.01, -0.11)
 evaGrabHeadDir = (0,0,1)
 evaDropHeadPos = (0.05, 0.01, -0.16)
 evaDropHeadRot = (180.0, 0.0, 0.0)
 ejectEnabled = true
 ejectForce = 20
 lockMinDist = 0.12
 lockMinFwdDot = 0.90
}

Kerbal Assembly System

Kerbal Assembly System is most noted for adding the option to grab and move parts using Kerbals. It also allows for storage of certain parts in containers.

MODULE:NEEDS[KAS] for the module

KASModuleContainer

Specifies that this part can serve as a container for other parts, and how much storage space the part has. Also included is an interaction distance. Kerbals must be this close or closer to open the container. Lots of sounds.

variable	example	definition
maxSize	5 20 80	specifies the size of the container relative to Kerbal Attachment System parts.
maxOpenDistance	1 5	Kerbals must be at least this close (in meters) in order to open the container
sndStorePath	KAS/Sounds/hookBayStore	sound stuff
sndOpenPath	KAS/Sounds/containerOpen	sound stuff for opening the container
sndClosePath	KAS/Sounds/containerClose	sound stuff for closing the container
bipWrongSndPath	KAS/Sounds/bipwrong	sound stuff

MODULE
{
 name = KASModuleContainer
 maxSize = 80
}

ModuleConnectedLivingSpace

variable	example	definition
passable	true false	specifies whether Kerbals can commute to parts connected to this part
passableWhenSurfaceAttached	true false	can be passed through even when connected to the ground?

MODULE
{
 name = ModuleConnectedLivingSpace
 passable = true
 passableWhenSurfaceAttached = true 
}

KASModuleGrab

variable	example	definition
evaPartPos	(0.0, 0.40, -0.40) (0.0, 0.0, -0.15)	three dimensional array, offset for carrying
evaPartDir	(0,0,-1)	three dimensional array for orientation
storable	true false	specifies whether the part can be stored
storedSize	20 14	specifies whether the part can be stored
attachOnPart	true false	uncertain
attachOnEva	true false	unsure
attachOnStatic	True False	unsure
customGroundPos	True False	unsure
attachNodeName	bottom	unsure
dropPartPos	(0.0, -0.2, -0.7)	unsure
dropPartRot	(-10.0, 0.0, 0.0)	unsure
bayType	hookbay	unsure
bayNode	top	unsure
bayRot	(0.0., 0.0, 0.0)	something to do with rotation
attachSendMsgOnly	true false	unknown

MODULE
{
name = KASModuleGrab            
evaPartPos = (0.0, 0.40, -0.40)        
evaPartDir = (0,0,-1)
storable = true
storedSize  = 20
attachOnPart = true
attachOnEva = true
bayType = hookBay
bayNode = top
bayRot = (0.0, 0.0, 0.0)
}

KASModulePartBay

variable

example

definition

BAY

{}

attachNode	top bottom	attachment placement
type	containerA container hookBay

MODULE
{
 name = KASModulePartBay
 BAY
 {
  attachNode = top
  type = containerA
  type = containerB
 }
}

KASModulePort

variable	example	definition
attachNode	top	unsure
nodeType	kasplug	unknown
breakForce	30	unknown
nodeTransformName	plugNode	unknown

MODULE
{
 name = KASModulePort
 attachNode = top
 nodeType = kasplug
 breakForce = 30
 nodeTransformName = plugNode
}

KASModuleAnchor

variable	example	definition This module will set a custom drag value when the part touch the ground.
groundDrag	500	Drag value of the anchor when it touch the ground
bounciness	0	Bounciness of the anchor
dynamicFriction	0.8	Dynamic friction of the anchor when it touch the ground
staticFriction	0.8	Static friction of the anchor when it touch the ground

MODULE
{
 name = KASModuleAnchor
 groundDrag = 500
 bounciness = 0
 dynamicFriction = 0.8 
 staticFriction = 0.8
}

KASModuleMagnet

This module will make the part acting like a magnet, collided part will be automatically attached. Only work when attached on a winch.

variable	example	definition
breakForce	10	The force that needs to be applied on the magnet joint to break.
attachToEva	true false	Disable/enable attraction of eva
minFwdDot	0.998	Minimum magnet alignement needed to attach (1 is perfectly aligned)
powerDrain	4	Power consumption when the magnet is used

MODULE
{
 name = KASModuleMagnet
 breakForce = 10
 attachToEva = False
 minFwdDot = 0.998
 powerDrain = 4
}

KASModuleStrut

variable	example	definition
nodeTransform	pipeNode strutNode	unknown
type	PipeSize1 StrutSize1	Unkown
maxLength	20 8	unknown
maxAngle	100	unknown
breakForce	10	unknown
allowDock	true false	unknown
allowPumpFuel	true false	unknown
hasCollider	true false	unknown
tubeScale	0.15	unknown
jointScale	0.15	unknown
textureTiling	1 4	unknown
tubeSrcType	Joined Rounded	Unknown
tubeTgtType	Joined Rounded	unknown
evaStrutPos	(0.05, 0.059, -0.21)	unknown
evaStrutRot	(190.0, 0.0, 0.0)	unknown
tubeTexPath	KAS/Textures/pipe	unknown

MODULE
{
 name = KASModuleStrut 
 nodeTransform = pipeNode
 type = PipeSize1 
 maxLenght = 20
 maxAngle = 100
 breakForce = 10
 allowDock = true
 allowPumpFuel = true
 hasCollider = false
 tubeScale = 0.15
 jointScale = 0.15
 textureTiling = 1
 tubeSrcType = Joined
 tubeTgtType = Joined
 evaStrutPos = (0.05, 0.059, -0.21)
 evaStrutRot = (190.0, 0.0, 0.0)
        tubeTexPath = KAS/Textures/pipe
}

KASModuleGrapplingHook

This module will make the part acting like a grappling-hook, any collided part in front of the grapple will be automatically attached if the inpact is strong enough. Only work when attached on a winch.

variable	example	definition
partBreakForce	6	The force that needs to be applied on the grapple/part joint to break.
staticBreakForce	15	The force that needs to be applied on the grapple/static joint to break.
aboveDist	0.05	Distance from the attach point to the center of the part
forceNeeded	4	Collision force needed to attach the grapple.
attachToPart	true false	Disable/enable attachment on parts.
rayDir	(0,-1,0)	Direction of the attach raycast. Attachment will be done only with objects in that direction.
rayLenght	0.8	Attach ray lenght.

MODULE
{
 name = KASModuleGrapplingHook
 partBreakForce = 6
 staticBreakForce = 15
 aboveDist = 0.05
 forceNeeded = 4
 attachToPart = true
 rayDir = (0,-1,0) 
 rayLenght = 0.8
}

KASModuleWinch

variable	example	definition
maxLenght	50 80	unknown
cableSpring	1000
cableDamper	0.1
cableWidth	0.04
motorMaxSpeed	2
motorAcceleration	0.05
powerDrain	0.5 0.3
headTransformName	head
headPortNodeName	portNode
connectedPortNodeName	bottom front
anchorNodeName	anchorNode
evaGrabHeadPos	(0.05, 0.01, -0.11)
evaGrabHeadDir	(0,0,1)
evaDropHeadPos	(0.05, 0.01, -0.16)
evaDropHeadRot	(180.0, 0.0, 0.0)
ejectEnabled	true false
ejectForce	20
lockMinDist	0.12
lockMinFwdDot	0.90

MODULE
{
 name = KASModuleWinch
 maxLenght = 50
 cableSpring = 1000
 cableDamper = 0.1
 cableWidth = 0.04
 motorMaxSpeed = 2
 motorAcceleration = 0.05
 powerDrain = 0.5
 headTransformName = head
 headPortNodeName = portNode
 connectedPortNodeName = bottom
 anchorNodeName = anchorNode
 evaGrabHeadPos = (0.05, 0.01, -0.11)
 evaGrabHeadDir = (0,0,1)
 evaDropHeadPos = (0.05, 0.01, -0.16)
 evaDropHeadRot = (180.0, 0.0, 0.0)
 ejectEnabled = true
 ejectForce = 20
 lockMinDist = 0.12
 lockMinFwdDot = 0.90
}

Kerbal Assembly System

Kerbal Assembly System is most noted for adding the option to grab and move parts using Kerbals. It also allows for storage of certain parts in containers.

MODULE:NEEDS[KAS] for the module

KASModuleContainer

Specifies that this part can serve as a container for other parts, and how much storage space the part has. Also included is an interaction distance. Kerbals must be this close or closer to open the container. Lots of sounds.

variable	example	definition
maxSize	5 20 80	specifies the size of the container relative to Kerbal Attachment System parts.
maxOpenDistance	1 5	Kerbals must be at least this close (in meters) in order to open the container
sndStorePath	KAS/Sounds/hookBayStore	sound stuff
sndOpenPath	KAS/Sounds/containerOpen	sound stuff for opening the container
sndClosePath	KAS/Sounds/containerClose	sound stuff for closing the container
bipWrongSndPath	KAS/Sounds/bipwrong	sound stuff

MODULE
{
 name = KASModuleContainer
 maxSize = 80
}

ModuleConnectedLivingSpace

variable	example	definition
passable	true false	specifies whether Kerbals can commute to parts connected to this part
passableWhenSurfaceAttached	true false	can be passed through even when connected to the ground?

MODULE
{
 name = ModuleConnectedLivingSpace
 passable = true
 passableWhenSurfaceAttached = true 
}

KASModuleGrab

variable	example	definition
evaPartPos	(0.0, 0.40, -0.40) (0.0, 0.0, -0.15)	three dimensional array, offset for carrying
evaPartDir	(0,0,-1)	three dimensional array for orientation
storable	true false	specifies whether the part can be stored
storedSize	20 14	specifies whether the part can be stored
attachOnPart	true false	uncertain
attachOnEva	true false	unsure
attachOnStatic	True False	unsure
customGroundPos	True False	unsure
attachNodeName	bottom	unsure
dropPartPos	(0.0, -0.2, -0.7)	unsure
dropPartRot	(-10.0, 0.0, 0.0)	unsure
bayType	hookbay	unsure
bayNode	top	unsure
bayRot	(0.0., 0.0, 0.0)	something to do with rotation
attachSendMsgOnly	true false	unknown

MODULE
{
name = KASModuleGrab            
evaPartPos = (0.0, 0.40, -0.40)        
evaPartDir = (0,0,-1)
storable = true
storedSize  = 20
attachOnPart = true
attachOnEva = true
bayType = hookBay
bayNode = top
bayRot = (0.0, 0.0, 0.0)
}

KASModulePartBay

variable

example

definition

BAY

{}

attachNode	top bottom	attachment placement
type	containerA container hookBay

MODULE
{
 name = KASModulePartBay
 BAY
 {
  attachNode = top
  type = containerA
  type = containerB
 }
}

KASModulePort

variable	example	definition
attachNode	top	unsure
nodeType	kasplug	unknown
breakForce	30	unknown
nodeTransformName	plugNode	unknown

MODULE
{
 name = KASModulePort
 attachNode = top
 nodeType = kasplug
 breakForce = 30
 nodeTransformName = plugNode
}

KASModuleAnchor

variable	example	definition This module will set a custom drag value when the part touch the ground.
groundDrag	500	Drag value of the anchor when it touch the ground
bounciness	0	Bounciness of the anchor
dynamicFriction	0.8	Dynamic friction of the anchor when it touch the ground
staticFriction	0.8	Static friction of the anchor when it touch the ground

MODULE
{
 name = KASModuleAnchor
 groundDrag = 500
 bounciness = 0
 dynamicFriction = 0.8 
 staticFriction = 0.8
}

KASModuleMagnet

This module will make the part acting like a magnet, collided part will be automatically attached. Only work when attached on a winch.

variable	example	definition
breakForce	10	The force that needs to be applied on the magnet joint to break.
attachToEva	true false	Disable/enable attraction of eva
minFwdDot	0.998	Minimum magnet alignement needed to attach (1 is perfectly aligned)
powerDrain	4	Power consumption when the magnet is used

MODULE
{
 name = KASModuleMagnet
 breakForce = 10
 attachToEva = False
 minFwdDot = 0.998
 powerDrain = 4
}

KASModuleStrut

variable	example	definition
nodeTransform	pipeNode strutNode	unknown
type	PipeSize1 StrutSize1	Unkown
maxLength	20 8	unknown
maxAngle	100	unknown
breakForce	10	unknown
allowDock	true false	unknown
allowPumpFuel	true false	unknown
hasCollider	true false	unknown
tubeScale	0.15	unknown
jointScale	0.15	unknown
textureTiling	1 4	unknown
tubeSrcType	Joined Rounded	Unknown
tubeTgtType	Joined Rounded	unknown
evaStrutPos	(0.05, 0.059, -0.21)	unknown
evaStrutRot	(190.0, 0.0, 0.0)	unknown
tubeTexPath	KAS/Textures/pipe	unknown

MODULE
{
 name = KASModuleStrut 
 nodeTransform = pipeNode
 type = PipeSize1 
 maxLenght = 20
 maxAngle = 100
 breakForce = 10
 allowDock = true
 allowPumpFuel = true
 hasCollider = false
 tubeScale = 0.15
 jointScale = 0.15
 textureTiling = 1
 tubeSrcType = Joined
 tubeTgtType = Joined
 evaStrutPos = (0.05, 0.059, -0.21)
 evaStrutRot = (190.0, 0.0, 0.0)
        tubeTexPath = KAS/Textures/pipe
}

KASModuleGrapplingHook

This module will make the part acting like a grappling-hook, any collided part in front of the grapple will be automatically attached if the inpact is strong enough. Only work when attached on a winch.

variable	example	definition
partBreakForce	6	The force that needs to be applied on the grapple/part joint to break.
staticBreakForce	15	The force that needs to be applied on the grapple/static joint to break.
aboveDist	0.05	Distance from the attach point to the center of the part
forceNeeded	4	Collision force needed to attach the grapple.
attachToPart	true false	Disable/enable attachment on parts.
rayDir	(0,-1,0)	Direction of the attach raycast. Attachment will be done only with objects in that direction.
rayLenght	0.8	Attach ray lenght.

MODULE
{
 name = KASModuleGrapplingHook
 partBreakForce = 6
 staticBreakForce = 15
 aboveDist = 0.05
 forceNeeded = 4
 attachToPart = true
 rayDir = (0,-1,0) 
 rayLenght = 0.8
}

KASModuleWinch

variable	example	definition
maxLenght	50 80	unknown
cableSpring	1000
cableDamper	0.1
cableWidth	0.04
motorMaxSpeed	2
motorAcceleration	0.05
powerDrain	0.5 0.3
headTransformName	head
headPortNodeName	portNode
connectedPortNodeName	bottom front
anchorNodeName	anchorNode
evaGrabHeadPos	(0.05, 0.01, -0.11)
evaGrabHeadDir	(0,0,1)
evaDropHeadPos	(0.05, 0.01, -0.16)
evaDropHeadRot	(180.0, 0.0, 0.0)
ejectEnabled	true false
ejectForce	20
lockMinDist	0.12
lockMinFwdDot	0.90

MODULE
{
 name = KASModuleWinch
 maxLenght = 50
 cableSpring = 1000
 cableDamper = 0.1
 cableWidth = 0.04
 motorMaxSpeed = 2
 motorAcceleration = 0.05
 powerDrain = 0.5
 headTransformName = head
 headPortNodeName = portNode
 connectedPortNodeName = bottom
 anchorNodeName = anchorNode
 evaGrabHeadPos = (0.05, 0.01, -0.11)
 evaGrabHeadDir = (0,0,1)
 evaDropHeadPos = (0.05, 0.01, -0.16)
 evaDropHeadRot = (180.0, 0.0, 0.0)
 ejectEnabled = true
 ejectForce = 20
 lockMinDist = 0.12
 lockMinFwdDot = 0.90
}

Kerbal Assembly System

Kerbal Assembly System is most noted for adding the option to grab and move parts using Kerbals. It also allows for storage of certain parts in containers.

MODULE:NEEDS[KAS] for the module

KASModuleContainer

Specifies that this part can serve as a container for other parts, and how much storage space the part has. Also included is an interaction distance. Kerbals must be this close or closer to open the container. Lots of sounds.

variable	example	definition
maxSize	5 20 80	specifies the size of the container relative to Kerbal Attachment System parts.
maxOpenDistance	1 5	Kerbals must be at least this close (in meters) in order to open the container
sndStorePath	KAS/Sounds/hookBayStore	sound stuff
sndOpenPath	KAS/Sounds/containerOpen	sound stuff for opening the container
sndClosePath	KAS/Sounds/containerClose	sound stuff for closing the container
bipWrongSndPath	KAS/Sounds/bipwrong	sound stuff

MODULE
{
 name = KASModuleContainer
 maxSize = 80
}

ModuleConnectedLivingSpace

variable	example	definition
passable	true false	specifies whether Kerbals can commute to parts connected to this part
passableWhenSurfaceAttached	true false	can be passed through even when connected to the ground?

MODULE
{
 name = ModuleConnectedLivingSpace
 passable = true
 passableWhenSurfaceAttached = true 
}

KASModuleGrab

variable	example	definition
evaPartPos	(0.0, 0.40, -0.40) (0.0, 0.0, -0.15)	three dimensional array, offset for carrying
evaPartDir	(0,0,-1)	three dimensional array for orientation
storable	true false	specifies whether the part can be stored
storedSize	20 14	specifies whether the part can be stored
attachOnPart	true false	uncertain
attachOnEva	true false	unsure
attachOnStatic	True False	unsure
customGroundPos	True False	unsure
attachNodeName	bottom	unsure
dropPartPos	(0.0, -0.2, -0.7)	unsure
dropPartRot	(-10.0, 0.0, 0.0)	unsure
bayType	hookbay	unsure
bayNode	top	unsure
bayRot	(0.0., 0.0, 0.0)	something to do with rotation
attachSendMsgOnly	true false	unknown

MODULE
{
name = KASModuleGrab            
evaPartPos = (0.0, 0.40, -0.40)        
evaPartDir = (0,0,-1)
storable = true
storedSize  = 20
attachOnPart = true
attachOnEva = true
bayType = hookBay
bayNode = top
bayRot = (0.0, 0.0, 0.0)
}

KASModulePartBay

variable

example

definition

BAY

{}

attachNode	top bottom	attachment placement
type	containerA container hookBay

MODULE
{
 name = KASModulePartBay
 BAY
 {
  attachNode = top
  type = containerA
  type = containerB
 }
}

KASModulePort

variable	example	definition
attachNode	top	unsure
nodeType	kasplug	unknown
breakForce	30	unknown
nodeTransformName	plugNode	unknown

MODULE
{
 name = KASModulePort
 attachNode = top
 nodeType = kasplug
 breakForce = 30
 nodeTransformName = plugNode
}

KASModuleAnchor

variable	example	definition This module will set a custom drag value when the part touch the ground.
groundDrag	500	Drag value of the anchor when it touch the ground
bounciness	0	Bounciness of the anchor
dynamicFriction	0.8	Dynamic friction of the anchor when it touch the ground
staticFriction	0.8	Static friction of the anchor when it touch the ground

MODULE
{
 name = KASModuleAnchor
 groundDrag = 500
 bounciness = 0
 dynamicFriction = 0.8 
 staticFriction = 0.8
}

KASModuleMagnet

This module will make the part acting like a magnet, collided part will be automatically attached. Only work when attached on a winch.

variable	example	definition
breakForce	10	The force that needs to be applied on the magnet joint to break.
attachToEva	true false	Disable/enable attraction of eva
minFwdDot	0.998	Minimum magnet alignement needed to attach (1 is perfectly aligned)
powerDrain	4	Power consumption when the magnet is used

MODULE
{
 name = KASModuleMagnet
 breakForce = 10
 attachToEva = False
 minFwdDot = 0.998
 powerDrain = 4
}

KASModuleStrut

variable	example	definition
nodeTransform	pipeNode strutNode	unknown
type	PipeSize1 StrutSize1	Unkown
maxLength	20 8	unknown
maxAngle	100	unknown
breakForce	10	unknown
allowDock	true false	unknown
allowPumpFuel	true false	unknown
hasCollider	true false	unknown
tubeScale	0.15	unknown
jointScale	0.15	unknown
textureTiling	1 4	unknown
tubeSrcType	Joined Rounded	Unknown
tubeTgtType	Joined Rounded	unknown
evaStrutPos	(0.05, 0.059, -0.21)	unknown
evaStrutRot	(190.0, 0.0, 0.0)	unknown
tubeTexPath	KAS/Textures/pipe	unknown

MODULE
{
 name = KASModuleStrut 
 nodeTransform = pipeNode
 type = PipeSize1 
 maxLenght = 20
 maxAngle = 100
 breakForce = 10
 allowDock = true
 allowPumpFuel = true
 hasCollider = false
 tubeScale = 0.15
 jointScale = 0.15
 textureTiling = 1
 tubeSrcType = Joined
 tubeTgtType = Joined
 evaStrutPos = (0.05, 0.059, -0.21)
 evaStrutRot = (190.0, 0.0, 0.0)
        tubeTexPath = KAS/Textures/pipe
}

KASModuleGrapplingHook

This module will make the part acting like a grappling-hook, any collided part in front of the grapple will be automatically attached if the inpact is strong enough. Only work when attached on a winch.

variable	example	definition
partBreakForce	6	The force that needs to be applied on the grapple/part joint to break.
staticBreakForce	15	The force that needs to be applied on the grapple/static joint to break.
aboveDist	0.05	Distance from the attach point to the center of the part
forceNeeded	4	Collision force needed to attach the grapple.
attachToPart	true false	Disable/enable attachment on parts.
rayDir	(0,-1,0)	Direction of the attach raycast. Attachment will be done only with objects in that direction.
rayLenght	0.8	Attach ray lenght.

MODULE
{
 name = KASModuleGrapplingHook
 partBreakForce = 6
 staticBreakForce = 15
 aboveDist = 0.05
 forceNeeded = 4
 attachToPart = true
 rayDir = (0,-1,0) 
 rayLenght = 0.8
}

KASModuleWinch

variable	example	definition
maxLenght	50 80	unknown
cableSpring	1000
cableDamper	0.1
cableWidth	0.04
motorMaxSpeed	2
motorAcceleration	0.05
powerDrain	0.5 0.3
headTransformName	head
headPortNodeName	portNode
connectedPortNodeName	bottom front
anchorNodeName	anchorNode
evaGrabHeadPos	(0.05, 0.01, -0.11)
evaGrabHeadDir	(0,0,1)
evaDropHeadPos	(0.05, 0.01, -0.16)
evaDropHeadRot	(180.0, 0.0, 0.0)
ejectEnabled	true false
ejectForce	20
lockMinDist	0.12
lockMinFwdDot	0.90

MODULE
{
 name = KASModuleWinch
 maxLenght = 50
 cableSpring = 1000
 cableDamper = 0.1
 cableWidth = 0.04
 motorMaxSpeed = 2
 motorAcceleration = 0.05
 powerDrain = 0.5
 headTransformName = head
 headPortNodeName = portNode
 connectedPortNodeName = bottom
 anchorNodeName = anchorNode
 evaGrabHeadPos = (0.05, 0.01, -0.11)
 evaGrabHeadDir = (0,0,1)
 evaDropHeadPos = (0.05, 0.01, -0.16)
 evaDropHeadRot = (180.0, 0.0, 0.0)
 ejectEnabled = true
 ejectForce = 20
 lockMinDist = 0.12
 lockMinFwdDot = 0.90
}

Kerbal Assembly System

Kerbal Assembly System is most noted for adding the option to grab and move parts using Kerbals. It also allows for storage of certain parts in containers.

MODULE:NEEDS[KAS] for the module

KASModuleContainer

Specifies that this part can serve as a container for other parts, and how much storage space the part has. Also included is an interaction distance. Kerbals must be this close or closer to open the container. Lots of sounds.

variable	example	definition
maxSize	5 20 80	specifies the size of the container relative to Kerbal Attachment System parts.
maxOpenDistance	1 5	Kerbals must be at least this close (in meters) in order to open the container
sndStorePath	KAS/Sounds/hookBayStore	sound stuff
sndOpenPath	KAS/Sounds/containerOpen	sound stuff for opening the container
sndClosePath	KAS/Sounds/containerClose	sound stuff for closing the container
bipWrongSndPath	KAS/Sounds/bipwrong	sound stuff

MODULE
{
 name = KASModuleContainer
 maxSize = 80
}

ModuleConnectedLivingSpace

variable	example	definition
passable	true false	specifies whether Kerbals can commute to parts connected to this part
passableWhenSurfaceAttached	true false	can be passed through even when connected to the ground?

MODULE
{
 name = ModuleConnectedLivingSpace
 passable = true
 passableWhenSurfaceAttached = true 
}

KASModuleGrab

variable	example	definition
evaPartPos	(0.0, 0.40, -0.40) (0.0, 0.0, -0.15)	three dimensional array, offset for carrying
evaPartDir	(0,0,-1)	three dimensional array for orientation
storable	true false	specifies whether the part can be stored
storedSize	20 14	specifies whether the part can be stored
attachOnPart	true false	uncertain
attachOnEva	true false	unsure
attachOnStatic	True False	unsure
customGroundPos	True False	unsure
attachNodeName	bottom	unsure
dropPartPos	(0.0, -0.2, -0.7)	unsure
dropPartRot	(-10.0, 0.0, 0.0)	unsure
bayType	hookbay	unsure
bayNode	top	unsure
bayRot	(0.0., 0.0, 0.0)	something to do with rotation
attachSendMsgOnly	true false	unknown

MODULE
{
name = KASModuleGrab            
evaPartPos = (0.0, 0.40, -0.40)        
evaPartDir = (0,0,-1)
storable = true
storedSize  = 20
attachOnPart = true
attachOnEva = true
bayType = hookBay
bayNode = top
bayRot = (0.0, 0.0, 0.0)
}

KASModulePartBay

variable

example

definition

BAY

{}

attachNode	top bottom	attachment placement
type	containerA container hookBay

MODULE
{
 name = KASModulePartBay
 BAY
 {
  attachNode = top
  type = containerA
  type = containerB
 }
}

KASModulePort

variable	example	definition
attachNode	top	unsure
nodeType	kasplug	unknown
breakForce	30	unknown
nodeTransformName	plugNode	unknown

MODULE
{
 name = KASModulePort
 attachNode = top
 nodeType = kasplug
 breakForce = 30
 nodeTransformName = plugNode
}

KASModuleAnchor

variable	example	definition This module will set a custom drag value when the part touch the ground.
groundDrag	500	Drag value of the anchor when it touch the ground
bounciness	0	Bounciness of the anchor
dynamicFriction	0.8	Dynamic friction of the anchor when it touch the ground
staticFriction	0.8	Static friction of the anchor when it touch the ground

MODULE
{
 name = KASModuleAnchor
 groundDrag = 500
 bounciness = 0
 dynamicFriction = 0.8 
 staticFriction = 0.8
}

KASModuleMagnet

This module will make the part acting like a magnet, collided part will be automatically attached. Only work when attached on a winch.

variable	example	definition
breakForce	10	The force that needs to be applied on the magnet joint to break.
attachToEva	true false	Disable/enable attraction of eva
minFwdDot	0.998	Minimum magnet alignement needed to attach (1 is perfectly aligned)
powerDrain	4	Power consumption when the magnet is used

MODULE
{
 name = KASModuleMagnet
 breakForce = 10
 attachToEva = False
 minFwdDot = 0.998
 powerDrain = 4
}

KASModuleStrut

variable	example	definition
nodeTransform	pipeNode strutNode	unknown
type	PipeSize1 StrutSize1	Unkown
maxLength	20 8	unknown
maxAngle	100	unknown
breakForce	10	unknown
allowDock	true false	unknown
allowPumpFuel	true false	unknown
hasCollider	true false	unknown
tubeScale	0.15	unknown
jointScale	0.15	unknown
textureTiling	1 4	unknown
tubeSrcType	Joined Rounded	Unknown
tubeTgtType	Joined Rounded	unknown
evaStrutPos	(0.05, 0.059, -0.21)	unknown
evaStrutRot	(190.0, 0.0, 0.0)	unknown
tubeTexPath	KAS/Textures/pipe	unknown

MODULE
{
 name = KASModuleStrut 
 nodeTransform = pipeNode
 type = PipeSize1 
 maxLenght = 20
 maxAngle = 100
 breakForce = 10
 allowDock = true
 allowPumpFuel = true
 hasCollider = false
 tubeScale = 0.15
 jointScale = 0.15
 textureTiling = 1
 tubeSrcType = Joined
 tubeTgtType = Joined
 evaStrutPos = (0.05, 0.059, -0.21)
 evaStrutRot = (190.0, 0.0, 0.0)
        tubeTexPath = KAS/Textures/pipe
}

KASModuleGrapplingHook

This module will make the part acting like a grappling-hook, any collided part in front of the grapple will be automatically attached if the inpact is strong enough. Only work when attached on a winch.

variable	example	definition
partBreakForce	6	The force that needs to be applied on the grapple/part joint to break.
staticBreakForce	15	The force that needs to be applied on the grapple/static joint to break.
aboveDist	0.05	Distance from the attach point to the center of the part
forceNeeded	4	Collision force needed to attach the grapple.
attachToPart	true false	Disable/enable attachment on parts.
rayDir	(0,-1,0)	Direction of the attach raycast. Attachment will be done only with objects in that direction.
rayLenght	0.8	Attach ray lenght.

MODULE
{
 name = KASModuleGrapplingHook
 partBreakForce = 6
 staticBreakForce = 15
 aboveDist = 0.05
 forceNeeded = 4
 attachToPart = true
 rayDir = (0,-1,0) 
 rayLenght = 0.8
}

KASModuleWinch

variable	example	definition
maxLenght	50 80	unknown
cableSpring	1000
cableDamper	0.1
cableWidth	0.04
motorMaxSpeed	2
motorAcceleration	0.05
powerDrain	0.5 0.3
headTransformName	head
headPortNodeName	portNode
connectedPortNodeName	bottom front
anchorNodeName	anchorNode
evaGrabHeadPos	(0.05, 0.01, -0.11)
evaGrabHeadDir	(0,0,1)
evaDropHeadPos	(0.05, 0.01, -0.16)
evaDropHeadRot	(180.0, 0.0, 0.0)
ejectEnabled	true false
ejectForce	20
lockMinDist	0.12
lockMinFwdDot	0.90

MODULE
{
 name = KASModuleWinch
 maxLenght = 50
 cableSpring = 1000
 cableDamper = 0.1
 cableWidth = 0.04
 motorMaxSpeed = 2
 motorAcceleration = 0.05
 powerDrain = 0.5
 headTransformName = head
 headPortNodeName = portNode
 connectedPortNodeName = bottom
 anchorNodeName = anchorNode
 evaGrabHeadPos = (0.05, 0.01, -0.11)
 evaGrabHeadDir = (0,0,1)
 evaDropHeadPos = (0.05, 0.01, -0.16)
 evaDropHeadRot = (180.0, 0.0, 0.0)
 ejectEnabled = true
 ejectForce = 20
 lockMinDist = 0.12
 lockMinFwdDot = 0.90
}

@@ Line 605: / Line 605: @@
-=== Kerbal Assembly System ===
+=== Universal Storage ===
-Kerbal Assembly System is most noted for adding the option to grab and move parts using Kerbals.  It also allows for storage of certain parts in containers.
+Universal Storage.  By the by:  Excellently documented!
-MODULE:NEEDS[KAS]
-for the module
 {|
@@ Line 616: / Line 613: @@
 |
 {|class="wikitable"
-==== KASModuleContainer ====
+==== ModuleAnimator ====
-Specifies that this part can serve as a container for other parts, and how much storage space the part has.  Also included is an interaction distance.  Kerbals must be this close or closer to open the container.  Lots of sounds.
+Animation module.
 ! variable !! example !! definition
 |-
-| maxSize ||
+| animationName ||
-* 5
+* Take 001
-* 20
+|| Name of the animation from the model.
-* 80
+|-
-|| specifies the size of the container relative to Kerbal Attachment System parts.
+| guiEnableName ||
+* Wedge Locks Off
+|| Part tooltip name to display for deployment
+|-
+| guiDisableName ||
+* Wedge Locks Off
+|| Part tooltip name to display for retraction
+|-
+| actionEnableName ||
+* Wedge Locks Off
+|| Action group name for deployment
+|-
+| actionDisableName ||
+* Wedge Locks On
+|| Action group name for retraction
+|-
+| animationSpeed ||
+* 100000
+|| Speed of the animation
 |-
-| maxOpenDistance ||
+| oneShot ||
-* 1
+* true
-* 5
+* false
-|| Kerbals must be at least this close (in meters) in order to open the container
+|| If the animation can only be played once
 |-
-| sndStorePath ||
+| activeEditor ||
-* KAS/Sounds/hookBayStore
+* true
-|| sound stuff
+* false
+|| If the part toolitp is visible in the editor
 |-
-| sndOpenPath ||
+| activeFlight ||
-* KAS/Sounds/containerOpen
+* true
-|| sound stuff for opening the container
+* false
+|| If the part tooltip is visible in flight
 |-
-| sndClosePath ||
+| activeUnfocused ||
-* KAS/Sounds/containerClose
+* true
-|| sound stuff for closing the container
+* false
+|| If the part tooltip is visible from EVA
 |-
-| bipWrongSndPath ||
+| unfocusedRange ||
-* KAS/Sounds/bipwrong
+* 5
-|| sound stuff
+|| EVA visible range
 |-
 |}
 ||
-<pre>MODULE
+<pre>
-{
+ MODULE
- name = KASModuleContainer
+ {
- maxSize = 80
+  name = ModuleAnimator
-}
+  animationName = Take 001
+  guiEnableName = Wedge Locks Off
+  guiDisableName = Wedge Locks On
+  actionEnableName = Wedge Locks Off
+  actionDisableName = Wedge Locks On
+  animationSpeed = 100000
+  oneShot = false
+  activeEditor = true
+  activeFlight = false
+  activeUnfocused = false
+  unfocusedRange = 5
+ }
 </pre>
 |-
@@ Line 1,205: / Line 1,235: @@
 |-
 |}
 === Kerbal Assembly System ===

Difference between revisions of "User:Joshuadery"

Revision as of 14:09, 26 December 2014

Contents

MODULES FROM MODS

Kerbal Assembly System

KASModuleContainer

ModuleConnectedLivingSpace

KASModuleGrab

KASModulePartBay

KASModulePort

KASModuleAnchor

KASModuleMagnet

KASModuleStrut

KASModuleGrapplingHook

KASModuleWinch

Universal Storage

ModuleAnimator

ModuleConnectedLivingSpace

KASModuleGrab

KASModulePartBay

KASModulePort

KASModuleAnchor

KASModuleMagnet

KASModuleStrut

KASModuleGrapplingHook

KASModuleWinch

Kerbal Assembly System

KASModuleContainer

ModuleConnectedLivingSpace

KASModuleGrab

KASModulePartBay

KASModulePort

KASModuleAnchor

KASModuleMagnet

KASModuleStrut

KASModuleGrapplingHook

KASModuleWinch

Kerbal Assembly System

KASModuleContainer

ModuleConnectedLivingSpace

KASModuleGrab

KASModulePartBay

KASModulePort

KASModuleAnchor

KASModuleMagnet

KASModuleStrut

KASModuleGrapplingHook

KASModuleWinch

Kerbal Assembly System

KASModuleContainer

ModuleConnectedLivingSpace

KASModuleGrab

KASModulePartBay

KASModulePort

KASModuleAnchor

KASModuleMagnet

KASModuleStrut

KASModuleGrapplingHook

KASModuleWinch

Kerbal Assembly System

KASModuleContainer

ModuleConnectedLivingSpace

KASModuleGrab

KASModulePartBay

KASModulePort

KASModuleAnchor

KASModuleMagnet

KASModuleStrut

KASModuleGrapplingHook

KASModuleWinch

Kerbal Assembly System

KASModuleContainer

ModuleConnectedLivingSpace

KASModuleGrab

KASModulePartBay

KASModulePort

KASModuleAnchor

KASModuleMagnet

KASModuleStrut

KASModuleGrapplingHook