Template:Infobox/Part
Infobox | ||
Adapter by O.M.B. Demolition Enterprises | ||
Radial size | Large, Small, Tiny | |
Cost | (total) | 800.00 ![]() |
Mass | (total) | 0.20 t |
Drag | 0.3 | |
Max. Temp. | 3400 K | |
Impact Tolerance | 12 m/s | |
Research | ![]() | |
Unlock cost | 1 200 ![]() | |
Since version | 0.21 | |
Part configuration | part.cfg | |
outgoing connectors | 4 |
Contents
Usage
To avoid adding the information for each language this templates should be reused and with the suggested subpage name /Box. The Templates help page contains additional information how to implement reusing. All page which use template directly should add the {{Data template used}} note.
Parameters
Name | Optional | Description | Default |
---|---|---|---|
name | Yes | Name of the part, which can be found in the localization file. Uses {{Dict/part name}} to translate names. | {{BASEPAGENAME}} |
file | Yes | Filename to image of the part. | File:Image needed.svg |
type | No | Type of the part. Automatically defines the role and parent parameter. | |
role | Yes | Role of the part. Overrides the type parameter. | {{type}} |
size | Yes | Radial size of the part (uses {{Radial Size}}). | Not set/Hidden |
size2 | Yes | Second radial size of the part (uses {{Radial Size}}). | Not set/Hidden |
size3 | Yes | Third radial size of the part (uses {{Radial Size}}). | Not set/Hidden |
manufacturer | Yes | Manufacturer of the part. If set linked to the category of this name (see also Category:Manufacturers). Automatically uses {{Infobox/Part/Manufacturer}} and {{Infobox/Part/Manufacturer entry}} on it. | Not set/Hidden |
manufacturer2 | Yes | Second manufacturer of the part. | Not set/Hidden |
costs | No | Cost of the part, which is usually given in the part.cfg. | |
mass | No | Mass of the part, which is usually given in the part.cfg. | |
lf | Yes | Amount of Liquid Fuel on that part in units. Only used for wet mass/dry costs calculation. | 0 |
ox | Yes | Amount of Oxidizer on that part in units. Only used for wet mass/dry costs calculation. | 0 |
mp | Yes | Amount of Monopropellant on that part in units. Only used wet mass/dry costs calculation. | 0 |
sf | Yes | Amount of Solid Fuel on that part in units. Only used for wet mass/dry costs calculation. | 0 |
xg | Yes | Amount of Xenon Gas on that part in units. Only used for wet mass/dry costs calculation. | 0 |
ia | Yes | Amount of Intake Air on that part in units. Only used for wet mass/dry costs calculation. | 0 |
or | Yes | Amount of Ore on that part in units. Only used for wet mass/dry costs calculation. | 0 |
ab | Yes | Amount of Ablator on that part in units. Only used for wet mass/dry costs calculation. | 0 |
drag | No | Drag of the part. By different values, add minimum_drag first and then maximum_drag | |
temp | No | Temperature resistance of the part, which is usually given in the part.cfg. | |
tolerance | No | Impact tolerance of the part, which is usually given in the part.cfg. | |
research | Yes | Research node required for this part. Uses {{Dict/sci node}} to translate names. | Unknown |
unlock cost | No | Cost to unlock the part, which is usually given in the part.cfg. | |
since | Yes | Version the part first appeared in. It will be used in {{version}}. | Unknown |
dlc | Yes | Name of the dlc. Used for link to cfg-entry in wiki. Can be:
|
Not Set |
filename | No | The filename (with extension) of the part.cfg | |
part | No | Name of the part folder. Used for link to cfg-entry in wiki. It will create a link to Parts/{{{parent}}}/{{{part}}}/part.cfg. | |
parent | No | Parent directory of the part folder. Used for part.cfg file, see above. Overrides the type parameter. | |
physics insignificant | Yes | Mark the mass and drag automatically with a note that they are insignificant (so called massless parts). This will use {{{nref}}}, so if it isn't set, will set it automatically to "N". Other notes can use that group then too. Must be set to "Y" or "y" to show insignificance. | Not set/Hidden |
notes | Yes | Additional notes below the part information. | Not set/Hidden |
nref | Yes | Automatically add references of the group with that name (usually N). Modules might have a nref parameter which needs to be set to the same value. | Not set/Hidden |
more | Yes | More module-specific information (see More parameter). | Not set |
If a mandatory parameter is missing Category:Infobox/Part with missing parameters will be added.
Configuration file
With the new folder structure since version 0.20 the part config file must be placed at Parts/{{{parent}}}/{{{part}}}/{{{filename}}}. The {{Part config}} template should be used in the part configuration pages. For some parts the actual parent differs from the type. For those cases parent overrides the type-based parent definition. One example is the Vernor Engine, because it's a RCS engine but it's definition is in Engine although the other two RCS engines are in Utility.
More parameter
To add additional fields the {{{more}}} parameter should be used with {{Infobox/Part/Line}} or {{Infobox/Line}}. It is preferred to use one of the modules.
Manufacturer
To add a manufacturer, it has to be added to the template {{Infobox/Part/Manufacturer}} and to {{Infobox/Part/ManufacturerUntranslated}}.
Types
For different types of parts this template allows to set the type parameter. The type will automatically set {{{role}}} and {{{parent}}} though they can be manually overwritten. The following values are supported:
If a part uses more than one type, for example the R.A.P.I.E.R. Engine, the type parameter is usually omitted and each subtemplate should use a header from {{Infobox/Part/title}}.
Additionally test subjects can use {{Infobox/Part/test subject}}.
Roles
Prior to the module system "roles" where used, but have been abandoned because they are not flexible enough. Currently only {{Infobox/Part/Strut}} is the only role template still used.
Template
{{Infobox/Part |name= |file= |type= |role= |size= |size2= |size3= |manufacturer= |manufacturer2= |costs= |mass= |volume= |stacking capacity= |lf= |ox= |mp= |sf= |xg= |ia= |or= |ab= |drag= |temp= |tolerance= |research= |unlock cost= |since= |dlc= |filename= |part= |parent= |physics insignificant= |notes= |nref= |more= }}
Example
Example used on this page:
{{Infobox/Part |file=TVR-400L Stack Quad-Adapter.png |type=ada |size=large |size2=small |size3=tiny |manufacturer=OMB |costs=800 |mass=0.2 |volume=25 |stacking capacity=4 |drag=0.3 |temp=3400 |tolerance=12 |research=Meta-Materials |unlock cost=1200 |since=0.21 |filename=part.cfg |part=adapterLargeSmallQuad |more={{Infobox/Part/adapter |out=4 }} }}
Translation
When using this template, most of it is translated automatically. To translate this template or one of the subtemplates, go to the {{Infobox/Part/Dict}} template.
Manufacturer
To add a translation for a manufacturer's name, add it to {{Infobox/Part/Manufacturer}} (use the {{lang}} template). Do not translate manufacturer names in the template {{Infobox/Part/ManufacturerUntranslated}}.