Difference between revisions of "Getting Started/th"

From Kerbal Space Program Wiki
Jump to: navigation, search
(เนื้อหาทั้งหมด)
 
(เนื้อหา2)
Line 8: Line 8:
  
 
== Buying ==
 
== Buying ==
 
 
Squad provides a fairly straightforward storefront from which you can buy KSP.
 
Squad provides a fairly straightforward storefront from which you can buy KSP.
  
 
#Visit http://kerbalspaceprogram.com
 
#Visit http://kerbalspaceprogram.com
 
 
#Click on the store, there should be a program labeled “Kerbal Space Program”, as well as a program labeled “Kerbalizer”, ignore Kerbalizer for now.
 
#Click on the store, there should be a program labeled “Kerbal Space Program”, as well as a program labeled “Kerbalizer”, ignore Kerbalizer for now.
 
 
<!-- I forgot ;_; -->
 
<!-- I forgot ;_; -->
  
Line 20: Line 17:
  
 
== Downloading ==
 
== Downloading ==
 
 
Currently, the entirety of the current version of Kerbal Space Program is downloaded at once. There are plans for a [[Patcher]], and the Steam version handles this automatically.
 
Currently, the entirety of the current version of Kerbal Space Program is downloaded at once. There are plans for a [[Patcher]], and the Steam version handles this automatically.
  
 
# Go to the store.
 
# Go to the store.
 
 
# Log in with your username and password.
 
# Log in with your username and password.
 
 
# Click on the Profile button.
 
# Click on the Profile button.
 
 
# Scroll down to the bottom and select the download link next to the purchase invoice.
 
# Scroll down to the bottom and select the download link next to the purchase invoice.
 
 
# Download the version for your platform.
 
# Download the version for your platform.
 
 
#* Mac users:
 
#* Mac users:
 
 
#*#Install Mono from the bundled .dmg file, if needed.
 
#*#Install Mono from the bundled .dmg file, if needed.
 
 
#*#Unzip the file into an empty folder.
 
#*#Unzip the file into an empty folder.
 
 
#*#Ensure the execute permission is set on the Patcher.command file.
 
#*#Ensure the execute permission is set on the Patcher.command file.
 
 
#* Windows Users:
 
#* Windows Users:
 
 
#*# Install .NET Framework 4.0 or above, if needed. (New versions of Windows already have it.)
 
#*# Install .NET Framework 4.0 or above, if needed. (New versions of Windows already have it.)
 
 
#*# Unzip the file into an '''empty folder''' that is '''not''' located under Program Files. A program like [http://www.7-zip.org/ 7-zip] may be useful.
 
#*# Unzip the file into an '''empty folder''' that is '''not''' located under Program Files. A program like [http://www.7-zip.org/ 7-zip] may be useful.
 
 
#* Linux Users:
 
#* Linux Users:
 
 
#*# You already know what to do, and the [[Linux|Linux-users help you]].<ref>http:////forum.kerbalspaceprogram.com/threads/24529-The-Linux-compatibility-thread!?highlight=linux+compatibility/ The-Linux-compatibility-thread</ref>
 
#*# You already know what to do, and the [[Linux|Linux-users help you]].<ref>http:////forum.kerbalspaceprogram.com/threads/24529-The-Linux-compatibility-thread!?highlight=linux+compatibility/ The-Linux-compatibility-thread</ref>
  
 
== Running the Game ==
 
== Running the Game ==
 
+
Run the game after installing it by browsing to the folder into which the game was unpacked in and running KSP.exe (KSP.app on OSX, KSP.x86_64 or KSP.x86 on Linux depending on whether you wish to the run the 64 or 32bit versions). A shortcut can be made on the Desktop to this file to speed opening the game but is unnecessary if you want to run KSP from a USB drive to carry all of your game information with you for playing on any computer.
Run the game after installing it by browsing to the folder into which the game was unpacked in and running KSP.exe (KSP.app on OSX, KSP.x86_64 or KSP.x86 on Linux depending on whether you wish to the run the 64 or 32bit versions). A shortcut can be made on the Desktop to this file to speed opening the game but is unnecessary if you want to run KSP from a USB drive to carry all of your game information with you for playing on any computer.
 
  
 
[[File:Mainscreen.jpg|thumbnail|center|Figure 1 : KSP Main Screen]]
 
[[File:Mainscreen.jpg|thumbnail|center|Figure 1 : KSP Main Screen]]
  
 
The main screen has the following options:
 
The main screen has the following options:
 
 
# Start Game
 
# Start Game
 
 
# [[Settings]] (This allows you to customize your settings, such as decreasing the graphics quality)
 
# [[Settings]] (This allows you to customize your settings, such as decreasing the graphics quality)
 
 
# KSP Community
 
# KSP Community
 
 
# Addons & Mods (This brings you to the [http://www.curse.com/ksp-mods/kerbal Curse Network], where you can download [[addon]]s
 
# Addons & Mods (This brings you to the [http://www.curse.com/ksp-mods/kerbal Curse Network], where you can download [[addon]]s
 
 
# Credits (This lists the developers of Kerbal Space Program)
 
# Credits (This lists the developers of Kerbal Space Program)
 
 
# Quit (Self-explanatory)
 
# Quit (Self-explanatory)
  
Line 82: Line 58:
  
 
Once the new game is started, the [[Kerbal Space Center|Launch Compound]] with the:
 
Once the new game is started, the [[Kerbal Space Center|Launch Compound]] with the:
 
 
* [[Vehicle Assembly Building]] (VAB) - Build and save vertically launched [[rocket]]s,
 
* [[Vehicle Assembly Building]] (VAB) - Build and save vertically launched [[rocket]]s,
 
 
* [[Space Plane Hangar]] (SPH) - Build and save horizontally launched [[plane]]s,
 
* [[Space Plane Hangar]] (SPH) - Build and save horizontally launched [[plane]]s,
 
 
* [[Tracking Station]] - Track and go to flights in progress, manage debris,
 
* [[Tracking Station]] - Track and go to flights in progress, manage debris,
 
 
* [[Astronaut Complex]] - Approve new candidates for space flight,
 
* [[Astronaut Complex]] - Approve new candidates for space flight,
 
 
** [[Flagpole]] - A flagpole for changing flag,
 
** [[Flagpole]] - A flagpole for changing flag,
 
 
* [[Launch pad]] - Launch vertical rockets,
 
* [[Launch pad]] - Launch vertical rockets,
 
 
* [[Runway]] - Launch and land airplanes,
 
* [[Runway]] - Launch and land airplanes,
 
 
* [[Research and Development|Research and Development facility]] - Invent better rockets (available in [[Science mode|Science]] and [[Career]] mode only),
 
* [[Research and Development|Research and Development facility]] - Invent better rockets (available in [[Science mode|Science]] and [[Career]] mode only),
 
 
* [[Mission Control]] - Controlling missions, getting [[contract]]s (available in Career mode only),
 
* [[Mission Control]] - Controlling missions, getting [[contract]]s (available in Career mode only),
 
 
* [[Administration Facility]] - Changing the business [[strategies]],
 
* [[Administration Facility]] - Changing the business [[strategies]],
 
 
will appear. To access a structure, just click on it.
 
will appear. To access a structure, just click on it.
 
 
[[File:KSC main.jpg|thumbnail|center|Figure 4 : The Launch Site]]
 
[[File:KSC main.jpg|thumbnail|center|Figure 4 : The Launch Site]]
  
 
== The Rocket! ==
 
== The Rocket! ==
 
+
Since a rocket is needed, select the middle structure, it will say Vehicle Assembly Building. From here we will begin the first rocket using a stock rocket.
Since a rocket is needed, select the middle structure, it will say Vehicle Assembly Building. From here we will begin the first rocket using a stock rocket.
 
  
 
[[File:KerbalXstock.0.21.1.png|thumbnail|center|Figure 5 : Assembly Menu]]
 
[[File:KerbalXstock.0.21.1.png|thumbnail|center|Figure 5 : Assembly Menu]]
  
Selecting the Orange Folder in the top right section of the window opens the menu shown in Figure 5. Find and select the [[Kerbal X]] (stock) to load it up. This [[rocket]] is fairly simple and can easily achieve orbit around the planet. If you are using the demo version, [http://dl.dropbox.com/u/27588455/Jam001.craft Here] is a simple rocket that can achieve orbit with more than enough fuel for returning to the planet.
+
Selecting the Orange Folder in the top right section of the window opens the menu shown in Figure 5. Find and select the [[Kerbal X]] (stock) to load it up. This [[rocket]] is fairly simple and can easily achieve orbit around the planet. If you are using the demo version, [http://dl.dropbox.com/u/27588455/Jam001.craft Here] is a simple rocket that can achieve orbit with more than enough fuel for returning to the planet.
  
 
[[File:TheKerbalX.0.21.1.png|thumbnail|center|Figure 6 : The Kerbal X]]
 
[[File:TheKerbalX.0.21.1.png|thumbnail|center|Figure 6 : The Kerbal X]]
  
This rocket is really simple and easy to explain. On the right side of the screen, shown in Figure 6, are orange folders that have numbers ranging from 0 to 8. These are the rocket's launch [[stage]]s. Launch stages differ from rocket stages in that launch stages are events that each {{Key press|spacebar}} press triggers. Each stage contains at least one icon; each icon symbolizes an event of that stage. The launch stages are:
+
This rocket is really simple and easy to explain. On the right side of the screen, shown in Figure 6, are orange folders that have numbers ranging from 0 to 8. These are the rocket's launch [[stage]]s. Launch stages differ from rocket stages in that launch stages are events that each {{Key press|spacebar}} press triggers. Each stage contains at least one icon; each icon symbolizes an event of that stage. The launch stages are:
  
 
# Rocket Launch Stage 8
 
# Rocket Launch Stage 8
 
 
#* Initial launch stage
 
#* Initial launch stage
 
 
#* Seven Liquid Fuel Thrusters.
 
#* Seven Liquid Fuel Thrusters.
 
 
# Rocket Launch Stage 7
 
# Rocket Launch Stage 7
 
 
#* Second launch stage
 
#* Second launch stage
 
 
#* Releases the support braces, called [[TT18-A Launch Stability Enhancer]]s, at the bottom of the Kerbal X Rocket (the open frame supports capped with the red cap)
 
#* Releases the support braces, called [[TT18-A Launch Stability Enhancer]]s, at the bottom of the Kerbal X Rocket (the open frame supports capped with the red cap)
 
 
# Rocket Launch Stage 6
 
# Rocket Launch Stage 6
 
 
#* This, the third, launch stage releases two of the boosters from the main rocket
 
#* This, the third, launch stage releases two of the boosters from the main rocket
 
 
#** Trigger this stage only after the first set of two boosters are out of fuel
 
#** Trigger this stage only after the first set of two boosters are out of fuel
 
 
#** Audio and visual cues indicate that a rocket engine is out of fuel
 
#** Audio and visual cues indicate that a rocket engine is out of fuel
 
 
# Rocket Launch Stage 5
 
# Rocket Launch Stage 5
 
 
#* After a short while two more engines will run out, and pressing the spacebar will activate this stage to release them from the rocket.
 
#* After a short while two more engines will run out, and pressing the spacebar will activate this stage to release them from the rocket.
 
 
#** Again, trigger this stage only *after* two more engines have run out of fuel
 
#** Again, trigger this stage only *after* two more engines have run out of fuel
 
 
# Rocket Launch Stage 4
 
# Rocket Launch Stage 4
 
 
#* The same as the previous two launch stages
 
#* The same as the previous two launch stages
 
 
#** However, it is the last set of the booster engines.
 
#** However, it is the last set of the booster engines.
 
 
# Rocket Launch Stage 3
 
# Rocket Launch Stage 3
 
 
#* The end of the first stage of the rocket
 
#* The end of the first stage of the rocket
 
 
#** Pressing the spacebar separates the main engine that helped the boosters get the rocket into space from the second stage of the rocket.
 
#** Pressing the spacebar separates the main engine that helped the boosters get the rocket into space from the second stage of the rocket.
 
 
# Rocket Launch Stage 2
 
# Rocket Launch Stage 2
 
 
#* Activates the smaller engine attached directly to the capsule
 
#* Activates the smaller engine attached directly to the capsule
 
 
# Rocket Launch Stage 1
 
# Rocket Launch Stage 1
 
 
#* The last stage before the parachute is opened
 
#* The last stage before the parachute is opened
 
 
#** Release the last engines; activate upon falling towards the planet
 
#** Release the last engines; activate upon falling towards the planet
 
 
# Rocket Launch Stage 0
 
# Rocket Launch Stage 0
 
 
#* Deploys the [[parachute]].
 
#* Deploys the [[parachute]].
  
Line 175: Line 113:
 
[[File:SASLarge.0.21.1.png|thumbnail|center|Figure 7 : Preparing for the SAS module]]
 
[[File:SASLarge.0.21.1.png|thumbnail|center|Figure 7 : Preparing for the SAS module]]
  
Figure 7 shows the main rocket stage removed in preparation of the [[Advanced S.A.S Module, Large/hu|black SAS module]], from the Control Tab, that will be added. To "break" the rocket in the correct place, simply point your mouse at the section below the [[Rockomax Brand Decoupler|separator ring]], the black and yellow ring with the red square on it, and do a left-mouse-click (LMC) once. This selects the fuel cell that is underneath of the separator ring and everything below that section of the rocket. Then simply move it out of the way, *but not into the grey component selections on the left* or else it will be trashed, and do another LMC to place the rocket components there.
+
Figure 7 shows the main rocket stage removed in preparation of the [[Advanced S.A.S Module, Large/hu|black SAS module]], from the Control Tab, that will be added. To "break" the rocket in the correct place, simply point your mouse at the section below the [[Rockomax Brand Decoupler|separator ring]], the black and yellow ring with the red square on it, and do a left-mouse-click (LMC) once. This selects the fuel cell that is underneath of the separator ring and everything below that section of the rocket. Then simply move it out of the way, *but not into the grey component selections on the left* or else it will be trashed, and do another LMC to place the rocket components there.
  
The [[SAS]] module will help greatly in keeping your rockets on course without much fuss from you. With the SAS added, a simple keypress {{Key press|T}}, after the rocket is moved out to the launchpad, will allow the rocket to stay almost perfectly centered while it is in flight. There are other concerns for keeping the rocket stable but those will be covered later.
+
The [[SAS]] module will help greatly in keeping your rockets on course without much fuss from you. With the SAS added, a simple keypress {{Key press|T}}, after the rocket is moved out to the launchpad, will allow the rocket to stay almost perfectly centered while it is in flight. There are other concerns for keeping the rocket stable but those will be covered later.
  
 
[[File:SASaddedFirstStage.0.21.1.png|thumbnail|center|Figure 8 : The SAS Added to the Main Rocket Stage]]
 
[[File:SASaddedFirstStage.0.21.1.png|thumbnail|center|Figure 8 : The SAS Added to the Main Rocket Stage]]
  
In order to add the SAS module, do an LMC on the black SAS module, then move your cursor over to the rocket sections. There should now be the SAS module following your cursor, and if not simply go back and do another LMC to select the module again. With the module following your cursor, drag it to the base of the separator ring and you will see the SAS turn green when it is properly placed. Do one last LMC and the module will be placed underneath the separator as shown in Figure 8. The last step is to combine the lower section back onto the SAS module. This is done the same way as it was taken off, just in reverse.
+
In order to add the SAS module, do an LMC on the black SAS module, then move your cursor over to the rocket sections. There should now be the SAS module following your cursor, and if not simply go back and do another LMC to select the module again. With the module following your cursor, drag it to the base of the separator ring and you will see the SAS turn green when it is properly placed. Do one last LMC and the module will be placed underneath the separator as shown in Figure 8. The last step is to combine the lower section back onto the SAS module. This is done the same way as it was taken off, just in reverse.
  
 
[[File:RCSFuelLarge.0.21.1.png|thumbnail|center|Figure 9 : Selecting the RCS Module]]
 
[[File:RCSFuelLarge.0.21.1.png|thumbnail|center|Figure 9 : Selecting the RCS Module]]
  
Another SAS module can be added to the section directly underneath the capsule. Simply repeat the same process to the separator that is underneath the capsule. While adding the SAS to the Capsule section, adding some [[RCS]] Fuel, Figure 9, will also assist in keeping the rocket stable in flight, by pressing {{Key press|R}} to turn on the rocket in flight. The last step is to add some RCS thrusters like the [[RV-105 RCS Thruster Block]], which I added to the capsule separation ring, see Figure 10. To add these thrusters in any sort of symmetry, use the symmetry icon in the bottom left of the screen, see Figure 11. Each LMC on this indicator will cycle through all of the cloning options, i.e. 1 - 8 duplicates of whatever item you are placing.
+
Another SAS module can be added to the section directly underneath the capsule. Simply repeat the same process to the separator that is underneath the capsule. While adding the SAS to the Capsule section, adding some [[RCS]] Fuel, Figure 9, will also assist in keeping the rocket stable in flight, by pressing {{Key press|R}} to turn on the rocket in flight. The last step is to add some RCS thrusters like the [[RV-105 RCS Thruster Block]], which I added to the capsule separation ring, see Figure 10. To add these thrusters in any sort of symmetry, use the symmetry icon in the bottom left of the screen, see Figure 11. Each LMC on this indicator will cycle through all of the cloning options, i.e. 1 - 8 duplicates of whatever item you are placing.
  
 
[[File:RCSAdded.0.21.1.png|thumbnail|center|Figure 10 : RCS Thrusters Added to the Capsule Separator Ring]]
 
[[File:RCSAdded.0.21.1.png|thumbnail|center|Figure 10 : RCS Thrusters Added to the Capsule Separator Ring]]
Line 191: Line 129:
 
[[File:SymmetryIndicator.png|thumbnail|center|Figure 11 : The Symmetry Indicator]]
 
[[File:SymmetryIndicator.png|thumbnail|center|Figure 11 : The Symmetry Indicator]]
  
Once the rocket is all attached together again, it is time to move the rocket to the launch pad. Referring back to Figure 1, the Launch Pad is the green icon in the upper right corner of the screen. Clicking on this icon will move the rocket onto the launch pad.
+
Once the rocket is all attached together again, it is time to move the rocket to the launch pad. Referring back to Figure 1, the Launch Pad is the green icon in the upper right corner of the screen. Clicking on this icon will move the rocket onto the launch pad.
  
 
==Launching the rocket==
 
==Launching the rocket==
 
 
Once you've made or selected a rocket, press the big green "'''[[Launch]]'''" button in the top right.
 
Once you've made or selected a rocket, press the big green "'''[[Launch]]'''" button in the top right.
  
Line 216: Line 153:
  
 
==Getting into orbit==
 
==Getting into orbit==
 
 
It's time learn more about your rocket. The parts editor in the [[VAB]] is simple enough to use, but if I were you I would stay away from [[spaceplane]]s for a little while longer.
 
It's time learn more about your rocket. The parts editor in the [[VAB]] is simple enough to use, but if I were you I would stay away from [[spaceplane]]s for a little while longer.
  
Line 222: Line 158:
  
 
====The launching stage====
 
====The launching stage====
 
 
This part of the rocket usually called [[launch vehicle]]. Here you have a whole bunch of high powered engines and large fuel tanks, [[Solid rocket booster]]s are most often used here. The motto here is pack as much of it on as you can because you're not taking it with you.
 
This part of the rocket usually called [[launch vehicle]]. Here you have a whole bunch of high powered engines and large fuel tanks, [[Solid rocket booster]]s are most often used here. The motto here is pack as much of it on as you can because you're not taking it with you.
  
Line 238: Line 173:
  
 
[[File:Kerbal X fire ret.png|thumb|Returning to Kerbin]]
 
[[File:Kerbal X fire ret.png|thumb|Returning to Kerbin]]
 
+
To reenter Kerbin, you need to burn [[retrograde]]. That sounds fancy, but if you have enough fuel just turn your rocket until you see the green circle with a cross in the middle: [[File:Retrograde.svg|24x24px|frameless|default]]. Point directly at it and burn. You do not have to aim the landing site, even not the ground, because the atmospheric drag modifies the trajectory. It is enough to lower the periapsis of a low circular orbit to 35-40&nbsp;km. This altitude ensures effective [[aerobraking]], but avoids the damage of the craft. If you still have usable engine, you can correct your trajectory for more preferable landing site. You can deploy your parachute after decoupling your last stage. The parachute can semi-deploy at altitude of 22&nbsp;km - in this state it works as drogue chute - and fully deploy 500&nbsp;m above the ground by default, and if you made your top stage light enough it will almost completely stop you before you hit the ground. It is worth to open the chute far before the full deployment altitude, because the semi-deployed chute still effectively lowers the speed. If your returning unit is too fast and too heavy, the suddenly full-deploying parachute will rip off and your [[kerbal]]s will fall to the ground, exploding upon impact. If the parachute has already opened and your capsule descending slowly, just wait for reaching the surface. If the capsule landed on ground or splashed-down, move your mouse on the altimeter in top-center on the screen and click on the popped down green '''''RECOVER VESSEL''''' button to [[Recovery|recover]] the pod. Congratulations, you have successfully finished your first space mission!  
To reenter Kerbin, you need to burn [[retrograde]]. That sounds fancy, but if you have enough fuel just turn your rocket until you see the green circle with a cross in the middle: [[File:Retrograde.svg|24x24px|frameless|default]]. Point directly at it and burn. You do not have to aim the landing site, even not the ground, because the atmospheric drag modifies the trajectory. It is enough to lower the periapsis of a low circular orbit to 35-40&nbsp;km. This altitude ensures effective [[aerobraking]], but avoids the damage of the craft. If you still have usable engine, you can correct your trajectory for more preferable landing site. You can deploy your parachute after decoupling your last stage. The parachute can semi-deploy at altitude of 22&nbsp;km - in this state it works as drogue chute - and fully deploy 500&nbsp;m above the ground by default, and if you made your top stage light enough it will almost completely stop you before you hit the ground. It is worth to open the chute far before the full deployment altitude, because the semi-deployed chute still effectively lowers the speed. If your returning unit is too fast and too heavy, the suddenly full-deploying parachute will rip off and your [[kerbal]]s will fall to the ground, exploding upon impact. If the parachute has already opened and your capsule descending slowly, just wait for reaching the surface. If the capsule landed on ground or splashed-down, move your mouse on the altimeter in top-center on the screen and click on the popped down green '''''RECOVER VESSEL''''' button to [[Recovery|recover]] the pod. Congratulations, you have successfully finished your first space mission!
 
 
 
 
<br><br>
 
<br><br>
 
 
:If you can do the previous simple mission (launch-getting to orbit-returning) confidently with a default Kerbal-X (or an own self-made rocket), it is the high time to move to the [[tutorials]] page where you may find many secrets of ship-building, mission planing and maneuvering.
 
:If you can do the previous simple mission (launch-getting to orbit-returning) confidently with a default Kerbal-X (or an own self-made rocket), it is the high time to move to the [[tutorials]] page where you may find many secrets of ship-building, mission planing and maneuvering.
  
 
== Notes ==
 
== Notes ==
 
 
<references />
 
<references />
  
 
{{Uncategorized|date=April 2014}}
 
{{Uncategorized|date=April 2014}}

Revision as of 13:08, 2 January 2015


This guide is intended to help you through your first few hours with Kerbal Space Program. It's far from comprehensive, but provides a decent understanding of the basics.

For an alternate walkthrough, including launching into orbit, see Tutorial: Walkthrough for Ye Compleat Beginner.

For an overview of game mechanics, see Tutorial:Game Manual.

Buying

Squad provides a fairly straightforward storefront from which you can buy KSP.

  1. Visit http://kerbalspaceprogram.com
  2. Click on the store, there should be a program labeled “Kerbal Space Program”, as well as a program labeled “Kerbalizer”, ignore Kerbalizer for now.

Alternatively, one can buy KSP through Steam, or some other smaller software distribution platform.

Downloading

Currently, the entirety of the current version of Kerbal Space Program is downloaded at once. There are plans for a Patcher, and the Steam version handles this automatically.

  1. Go to the store.
  2. Log in with your username and password.
  3. Click on the Profile button.
  4. Scroll down to the bottom and select the download link next to the purchase invoice.
  5. Download the version for your platform.
    • Mac users:
      1. Install Mono from the bundled .dmg file, if needed.
      2. Unzip the file into an empty folder.
      3. Ensure the execute permission is set on the Patcher.command file.
    • Windows Users:
      1. Install .NET Framework 4.0 or above, if needed. (New versions of Windows already have it.)
      2. Unzip the file into an empty folder that is not located under Program Files. A program like 7-zip may be useful.
    • Linux Users:
      1. You already know what to do, and the Linux-users help you.[1]

Running the Game

Run the game after installing it by browsing to the folder into which the game was unpacked in and running KSP.exe (KSP.app on OSX, KSP.x86_64 or KSP.x86 on Linux depending on whether you wish to the run the 64 or 32bit versions). A shortcut can be made on the Desktop to this file to speed opening the game but is unnecessary if you want to run KSP from a USB drive to carry all of your game information with you for playing on any computer.

Figure 1 : KSP Main Screen

The main screen has the following options:

  1. Start Game
  2. Settings (This allows you to customize your settings, such as decreasing the graphics quality)
  3. KSP Community
  4. Addons & Mods (This brings you to the Curse Network, where you can download addons
  5. Credits (This lists the developers of Kerbal Space Program)
  6. Quit (Self-explanatory)

By selecting the Start Game menu item, the Start and Load Game menu will appear.

Figure 2 : Start / Resume Game Menu

When starting a new game in Sandbox mode, which is what this portion of the WIKI is assuming, the save game name does not have to remain 'default'. Change this to what ever name you want the save file to be. For the other options, see the Science and the Career mode page. You can also change the Difficulty Settings here too.

Let start a Sandbox mode game, and let the difficulty settings as Normal!

Figure 3 : New Game Window

Once the new game is started, the Launch Compound with the:

will appear. To access a structure, just click on it.

Figure 4 : The Launch Site

The Rocket!

Since a rocket is needed, select the middle structure, it will say Vehicle Assembly Building. From here we will begin the first rocket using a stock rocket.

Figure 5 : Assembly Menu

Selecting the Orange Folder in the top right section of the window opens the menu shown in Figure 5. Find and select the Kerbal X (stock) to load it up. This rocket is fairly simple and can easily achieve orbit around the planet. If you are using the demo version, Here is a simple rocket that can achieve orbit with more than enough fuel for returning to the planet.

Figure 6 : The Kerbal X

This rocket is really simple and easy to explain. On the right side of the screen, shown in Figure 6, are orange folders that have numbers ranging from 0 to 8. These are the rocket's launch stages. Launch stages differ from rocket stages in that launch stages are events that each spacebar press triggers. Each stage contains at least one icon; each icon symbolizes an event of that stage. The launch stages are:

  1. Rocket Launch Stage 8
    • Initial launch stage
    • Seven Liquid Fuel Thrusters.
  2. Rocket Launch Stage 7
    • Second launch stage
    • Releases the support braces, called TT18-A Launch Stability Enhancers, at the bottom of the Kerbal X Rocket (the open frame supports capped with the red cap)
  3. Rocket Launch Stage 6
    • This, the third, launch stage releases two of the boosters from the main rocket
      • Trigger this stage only after the first set of two boosters are out of fuel
      • Audio and visual cues indicate that a rocket engine is out of fuel
  4. Rocket Launch Stage 5
    • After a short while two more engines will run out, and pressing the spacebar will activate this stage to release them from the rocket.
      • Again, trigger this stage only *after* two more engines have run out of fuel
  5. Rocket Launch Stage 4
    • The same as the previous two launch stages
      • However, it is the last set of the booster engines.
  6. Rocket Launch Stage 3
    • The end of the first stage of the rocket
      • Pressing the spacebar separates the main engine that helped the boosters get the rocket into space from the second stage of the rocket.
  7. Rocket Launch Stage 2
    • Activates the smaller engine attached directly to the capsule
  8. Rocket Launch Stage 1
    • The last stage before the parachute is opened
      • Release the last engines; activate upon falling towards the planet
  9. Rocket Launch Stage 0

That is the run down of the orange tabs on the right side of the screen. While there is nothing that really *needs* to be done to the Kerbal X Rocket, I strongly advise adding a couple of items that will make getting into orbit a bit easier.

Figure 7 : Preparing for the SAS module

Figure 7 shows the main rocket stage removed in preparation of the black SAS module, from the Control Tab, that will be added. To "break" the rocket in the correct place, simply point your mouse at the section below the separator ring, the black and yellow ring with the red square on it, and do a left-mouse-click (LMC) once. This selects the fuel cell that is underneath of the separator ring and everything below that section of the rocket. Then simply move it out of the way, *but not into the grey component selections on the left* or else it will be trashed, and do another LMC to place the rocket components there.

The SAS module will help greatly in keeping your rockets on course without much fuss from you. With the SAS added, a simple keypress T, after the rocket is moved out to the launchpad, will allow the rocket to stay almost perfectly centered while it is in flight. There are other concerns for keeping the rocket stable but those will be covered later.

Figure 8 : The SAS Added to the Main Rocket Stage

In order to add the SAS module, do an LMC on the black SAS module, then move your cursor over to the rocket sections. There should now be the SAS module following your cursor, and if not simply go back and do another LMC to select the module again. With the module following your cursor, drag it to the base of the separator ring and you will see the SAS turn green when it is properly placed. Do one last LMC and the module will be placed underneath the separator as shown in Figure 8. The last step is to combine the lower section back onto the SAS module. This is done the same way as it was taken off, just in reverse.

Figure 9 : Selecting the RCS Module

Another SAS module can be added to the section directly underneath the capsule. Simply repeat the same process to the separator that is underneath the capsule. While adding the SAS to the Capsule section, adding some RCS Fuel, Figure 9, will also assist in keeping the rocket stable in flight, by pressing R to turn on the rocket in flight. The last step is to add some RCS thrusters like the RV-105 RCS Thruster Block, which I added to the capsule separation ring, see Figure 10. To add these thrusters in any sort of symmetry, use the symmetry icon in the bottom left of the screen, see Figure 11. Each LMC on this indicator will cycle through all of the cloning options, i.e. 1 - 8 duplicates of whatever item you are placing.

Figure 10 : RCS Thrusters Added to the Capsule Separator Ring
Figure 11 : The Symmetry Indicator

Once the rocket is all attached together again, it is time to move the rocket to the launch pad. Referring back to Figure 1, the Launch Pad is the green icon in the upper right corner of the screen. Clicking on this icon will move the rocket onto the launch pad.

Launching the rocket

Once you've made or selected a rocket, press the big green "Launch" button in the top right.

Flight controls are not exactly straightforward. WSAD move the ship around, but they are relative to your rotation, controlled with Q and E. The easiest way to keep your rocket on target with WSAD is to look at the navball, in the bottom middle of the screen.

Before launching your rocket, take a second to look at your map, by pressing M. This will bring up Kerbin on the map. Scroll out to show kerbins moons, and even farther to see the rest of the solar system. It will be a while before you even learn how to make a rocket than can escape the sphere of influence of Kerbin, so experiment with different rocket designs, and see what works best for you.

Launching your rocket is the easy part. Just throttle up with left-shift and press space. But don't do that just yet, press T to turn SAS on. SAS is essentially autopilot, without SAS you just won't turn as well. The SAS allows you to control the movement of your rocket with the WSADQE keys faster, and with more power, and allows your rocket to use thrust vectoring (You'll learn about that later too) and it keeps you on course, instead of you having to turn manually.

Each time you run out of fuel in a stage, press space until the next stage of fuel and engines start burning.

If you don't want to read everything I said above all you need to know is before launching press T, hold left-shift until the throttle is at maximum, then press space to launch and if your rocket stops going, press space again.

You can also imitate the real-life launches, execute a slow gravity turn. The main point the gravity turn is the engines can spend all of their thrust to increase the speed and fight against the gravity and drag, turning of velocity vector (this is basically a wasted work) made by gravity on a trajectory minimalizes the loss by aerodynamic drag and gravity. It saves a lot of fuel during ascent. As I mentioned, the essence of gravity turn: the rocket always flies towards the heading - this direction called prograde and signed on the navball by this mark: default. During the ascending keep the level indicator in the middle of the navball nearby the prograde mark.

The first step is ascending vertically, at altitude of 2 kms pitch over with angle of 1-2 degrees (relative to vertical) to east (this is called pitchover maneuver), and after this maneuver just slowly, gently and continuously increase the angle following the prograd mark, while keeping a heading of 90 degrees east, but do give greater tilt over 15-20° until reach 10 km. At this altitude you can start increase (slowly, gently and continuously) the pitch to 35-45 degrees above the artificial horizon, over 20 km altitude increase the tilt over 15-25 degrees (at 30 000 m) , and tilt on until a the heading differs to horizontal only some degrees at 40 kms altitude. And keep an eye on the apoapsis (marked with "Ap" on the map), and turn off the throttle left-^ Control if reached 70 km - this needs speed of 1700-2000 m/s relative to orbit (or 1525-1825 m/s relative to surface (see: Point of reference) on a right trajectory, but less is enough on less efficient steeper trajectory). Remember: the too shallow trajectory wastes the fuel for drag, the too steep for the gravity.

If this seems too complicated, try a simplified (and not so efficient) recipe: start "gravity turn" at 10 km and pitch over to a vertical angle of 45 degrees, while keeping a heading of 90 degrees east. While your apoapsis is 50 km, pitch over to 30 degrees. As said above monitor your apoapsis in the map to time your engine stop and wait until 10 seconds before apoapsis to start burning.

The difference between the two method in case of Kerbal-X like rockets can reach 200 m/s Δv of fuel efficiency. The another benefit of the "real" gravity turn induces less stress of the rocket-body - so less stability improvement (SAS,RCS) needed for the rocket, which makes the rocket cheaper, and results better weight ratio and improved efficiency. Thats why the gravity turn wort to learn well.

Getting into orbit

It's time learn more about your rocket. The parts editor in the VAB is simple enough to use, but if I were you I would stay away from spaceplanes for a little while longer.

You already know a little bit about staging, but I'm going to generalize it even more for you.

The launching stage

This part of the rocket usually called launch vehicle. Here you have a whole bunch of high powered engines and large fuel tanks, Solid rocket boosters are most often used here. The motto here is pack as much of it on as you can because you're not taking it with you.

If you do not already know, you can mount things radially (on the side) of other things, and by the magic of the symmetry button (Bottom of the parts menu) you can have the radially mounted things not make your poor rocket tip over.

Staging is one of the most important aspects of building a rocket. I still use staging, even though a lot of people have quickly traded it out for action groups. On the right there is a tall bar with everything in its respective stage, however if you were to put half your rockets in one stage and the other half in another, you would go almost 3 times as far, in twice the time!

The other stages

Generally split into a circularization stage (I totally didn't make that word up), and an interplanetary stage. For now all you really need to know is everything after the stages in the atmosphere should be light, with medium to low power. Once you're out, if you're going into orbit all you need is a LV-N, 909 or a Poodle, depending on your preference.

Orbiting and reentry

Remember when I told you how to open the map? That's going to come in handy here. Your map also shows your orbital details, so what you need to do is burn just about directly up with your launcher stage. This may take a while, and I encourage you NOT to use the physics warp as with most rockets if you are burning as using the physics warp will almost always make you veer wildly off course or explode in midair. Once your apoapsis (displayed on the map) is above about 70 km, press X or hold control to turn off your throttle. Turn off SAS and aim your rocket so it is facing sideways. On the navball the marker indicating your direction should be right on the border between blue and brown. Turn SAS back on and time warp (slowly) until your rocket is about 1 km below your apoapsis, then start burning. On the map your orbit should get wider and wider (you can bring up your navball on the map and keep steering, and see your fuel on the map by pressing F2 twice), and once it gets wide enough your periapsis (marked with "Pe" on the map) will pop out of the ground, see its shadow and go scampering off into space. Once your apoapsis and periapsis are both above 70 km, you can rest and look at your work. Then you can start thinking "Great, I have a piece of junk in orbit of my planet."

Returning to Kerbin

To reenter Kerbin, you need to burn retrograde. That sounds fancy, but if you have enough fuel just turn your rocket until you see the green circle with a cross in the middle: default. Point directly at it and burn. You do not have to aim the landing site, even not the ground, because the atmospheric drag modifies the trajectory. It is enough to lower the periapsis of a low circular orbit to 35-40 km. This altitude ensures effective aerobraking, but avoids the damage of the craft. If you still have usable engine, you can correct your trajectory for more preferable landing site. You can deploy your parachute after decoupling your last stage. The parachute can semi-deploy at altitude of 22 km - in this state it works as drogue chute - and fully deploy 500 m above the ground by default, and if you made your top stage light enough it will almost completely stop you before you hit the ground. It is worth to open the chute far before the full deployment altitude, because the semi-deployed chute still effectively lowers the speed. If your returning unit is too fast and too heavy, the suddenly full-deploying parachute will rip off and your kerbals will fall to the ground, exploding upon impact. If the parachute has already opened and your capsule descending slowly, just wait for reaching the surface. If the capsule landed on ground or splashed-down, move your mouse on the altimeter in top-center on the screen and click on the popped down green RECOVER VESSEL button to recover the pod. Congratulations, you have successfully finished your first space mission!

If you can do the previous simple mission (launch-getting to orbit-returning) confidently with a default Kerbal-X (or an own self-made rocket), it is the high time to move to the tutorials page where you may find many secrets of ship-building, mission planing and maneuvering.

Notes

  1. http:////forum.kerbalspaceprogram.com/threads/24529-The-Linux-compatibility-thread!?highlight=linux+compatibility/ The-Linux-compatibility-thread