Difference between revisions of "J-404 "Panther" Afterburning Turbofan"

From Kerbal Space Program Wiki
Jump to: navigation, search
(Small expansion of stubbed article)
Line 1: Line 1:
 
{{:J-404 "Panther" Afterburning Turbofan/Box}}
 
{{:J-404 "Panther" Afterburning Turbofan/Box}}
{{Stub}}
+
The '''J-404 "Panther" Afterburning Turbofan''' is a [[jet engine]] added in version 1.0.5. It has two modes: The first, Dry mode, is similar to that of the [[J-33 "Wheesley" Basic Jet Engine]], with a bit more thrust. The second, Wet mode, uses the afterburner to produce thrust almost equal to the [[J-X4 "Whiplash" Turbo Ramjet Engine]], but at a considerably reduced fuel efficiency. This can make it a good alternative for when you want something that can be controllable and doesn't need excessive heat shielding, but still need to be able to go incredibly fast if necessary, at the expense of increased fuel consumption.
The '''J-404 "Panther" Afterburning Turbofan''' is a [[jet engine]] added in version 1.0.5. It has two modes: The first, Dry mode, is similar to that of the [[J-33 "Wheesley" Basic Jet Engine]], with a bit more thrust. The second, Wet mode, uses the afterburner to produce thrust almost equal to the [[J-X4 "Whiplash" Turbo Ramjet Engine]], but at a considerably reduced efficiency. This can make it a good alternative for when you want something that can be controllable and doesn't need excessive heat shielding, but still need to be able to go incredibly fast if necessary, at the expense of increased fuel consumption.
 
  
Note that you need to activate the afterburner ("Wet Mode") ''manually''. You do that by right-clicking the engine and clicking "Toggle Mode."
+
== Usage ==
 +
[[File:J-404 Panther Afterburning Turbofan velocity curves.png|thumbnail|left|Visualization of the thrust multiplier curves for velocity]]
 +
[[File:J-404 Panther Afterburning Turbofan atmosphere curves.png|thumbnail|left|Visualization of the thrust multiplier curves for atmospheric pressure]]
 +
 
 +
Note that you need to activate the afterburner ("Wet Mode") ''manually''. You can do that by right-clicking the engine and clicking "Toggle Mode." Alternatively, you can assign the afterburner toggle (labelled "switch mode") to an [[action group]] if you wish to activate it with a hotkey. Be aware that heat buildup can be a problem in sustained flight while using the afterburner.
  
 
A well-designed jet with this engine and with the afterburner lit, flown properly, can momentarily climb to 30Km altitude. Or it can supercruise at three times the speed of an equivalent Wheesley jet (with nearly equal fuel efficiency) at 15Km altitude. Which makes this engine ideal for those missions which require doing many science activities above particular altitudes.
 
A well-designed jet with this engine and with the afterburner lit, flown properly, can momentarily climb to 30Km altitude. Or it can supercruise at three times the speed of an equivalent Wheesley jet (with nearly equal fuel efficiency) at 15Km altitude. Which makes this engine ideal for those missions which require doing many science activities above particular altitudes.
  
== Usage ==
+
It's also worth noting that this engine has the widest thrust vectoring range of all of the jet engines, with a full 10-degree range in all directions. This makes jets built using this engine considerably more maneuverable. For comparison, the second most maneuverable engine is the [[CR-7 R.A.P.I.E.R. Engine|CR-7 R.A.P.I.E.R.]] with a thrust vectoring range of only 3 degrees. Under some circumstances, you may want to reduce the engine gimbal range or disable it altogether, particularly when flying at high speeds (e.g. 600+ m/s) and low altitudes (e.g. below 5,000 m), since the engine's extreme maneuverability may allow the aircraft to perform turns sharply enough to break up in flight.
[[File:J-404 Panther Afterburning Turbofan velocity curves.png|thumb|Visualization of the thrust multiplier curves for velocity]]
 
[[File:J-404 Panther Afterburning Turbofan atmosphere curves.png|thumb|Visualization of the thrust multiplier curves for atmospheric pressure]]
 
  
 
== Product description ==
 
== Product description ==

Revision as of 20:33, 21 January 2016

J-404 "Panther" Afterburning Turbofan
Part image
Jet engine by
C7 Aerospace Division

Radial size Small
Cost (total) 2 000.00 Funds
Mass (total) 1.20 t
Drag 0.2
Max. Temp. 2000 K
Volume  ?
Impact Tolerance 7 m/s
Research Supersonic flight.png Supersonic Flight
Unlock cost 9 000 Funds
Since version 1.0.5
Part configuration jetEngineAfterburning.cfg
Jet engine
Maximum thrust 85 kN
Isp (max) 9000 s
Fuel consumption 0.19 Units of fuel/s
Intake air consumption 7.70 Air unit/s
Thrust vectoring 10 °
Maximum thrust 130 kN
Isp (max) 4000 s
Fuel consumption 0.66 Units of fuel/s
Intake air consumption 7.95 Air unit/s
Thrust vectoring 10 °
Testing Environments
On the surface Yes
In the ocean Yes
On the launchpad Yes
In the atmosphere Yes
Sub orbital No
In an orbit No
On an escape No
Docked No
Test by staging Yes
Manually testable Yes

The J-404 "Panther" Afterburning Turbofan is a jet engine added in version 1.0.5. It has two modes: The first, Dry mode, is similar to that of the J-33 "Wheesley" Basic Jet Engine, with a bit more thrust. The second, Wet mode, uses the afterburner to produce thrust almost equal to the J-X4 "Whiplash" Turbo Ramjet Engine, but at a considerably reduced fuel efficiency. This can make it a good alternative for when you want something that can be controllable and doesn't need excessive heat shielding, but still need to be able to go incredibly fast if necessary, at the expense of increased fuel consumption.

Usage

Visualization of the thrust multiplier curves for velocity
Visualization of the thrust multiplier curves for atmospheric pressure

Note that you need to activate the afterburner ("Wet Mode") manually. You can do that by right-clicking the engine and clicking "Toggle Mode." Alternatively, you can assign the afterburner toggle (labelled "switch mode") to an action group if you wish to activate it with a hotkey. Be aware that heat buildup can be a problem in sustained flight while using the afterburner.

A well-designed jet with this engine and with the afterburner lit, flown properly, can momentarily climb to 30Km altitude. Or it can supercruise at three times the speed of an equivalent Wheesley jet (with nearly equal fuel efficiency) at 15Km altitude. Which makes this engine ideal for those missions which require doing many science activities above particular altitudes.

It's also worth noting that this engine has the widest thrust vectoring range of all of the jet engines, with a full 10-degree range in all directions. This makes jets built using this engine considerably more maneuverable. For comparison, the second most maneuverable engine is the CR-7 R.A.P.I.E.R. with a thrust vectoring range of only 3 degrees. Under some circumstances, you may want to reduce the engine gimbal range or disable it altogether, particularly when flying at high speeds (e.g. 600+ m/s) and low altitudes (e.g. below 5,000 m), since the engine's extreme maneuverability may allow the aircraft to perform turns sharply enough to break up in flight.

Product description

A high performance jet engine with a variable geometry thrust vectoring nozzle and an afterburner for extra thrust.

Changes

1.0.5
  • Initial release