Mk1 Cockpit

From Kerbal Space Program Wiki
Revision as of 10:23, 5 May 2013 by XZise (talk | contribs) (*outsource box contents; !changes in correct order w/o prefix;)
Jump to: navigation, search
Mk1 Cockpit
Part image
Cockpit by
C7 Aerospace Division
Radial size Small
Cost (total) 1 250.00 Funds
(dry) 1 241.00 Funds
Mass (total) 1.28 t
(dry) 1.25 t
Drag 0.1
Max. Temp. 2000 K
Impact Tolerance 40 m/s
Research Aviation.png Aviation
Unlock cost 2 600 Funds
Since version 0.15
Part configuration mk1Cockpit
Command module
Pitch torque 10.0 kN·m
Yaw torque 10.0 kN·m
Roll torque 10.0 kN·m
Electricity required for torque
Crew capacity (maximum) Crew
(required) Crew
Monopropellant 8 Units of fuel
Electric capacity 50.0 
SAS level × None

The Mk1 Cockpit is a cockpit designed for use in an airplane or spaceplane type of craft with parts of a size of one metre. A cockpit, or command pod, or probe body is necessary in order to build a spaceplane or spacecraft.


The Mk1 cockpit is generally found at the front of the spacecraft. It houses your crew, and also provides basic S.A.S. torque (for steering your rocket). However, there is no room for an aeronautics-grade A.S.A.S. unit, so any spacecraft with this command pod must either be steered by hand, or it has to have an A.S.A.S. module intended for a vertically constructed rocket.

Interior View of the Cockpit Mk1 on the runway


C7 Aerospace is proud to present out second generation cockpit. This unit is equipped to ensure survival in some of the worst conditions possible. The extra re-enforcement has slightly increased the weight.

C7 Aerospace Division


  • Added Electrical power
  • Added IVA
  • Crew capacity reduced from 3 to 1.
  • Initial Release