Difference between revisions of "Radiator Panel (edge)"

From Kerbal Space Program Wiki
Jump to: navigation, search
m ("...deployable...")
m (EC link and state charge used.)
Line 1: Line 1:
 
{{:Radiator Panel (edge)/Box}}
 
{{:Radiator Panel (edge)/Box}}
  
The '''Radiator Panel (edge)''' is a fixed [[radiator]] used to dissipate waste heat into space (and [[atmosphere]]), pumping it out of nearby hot parts on the craft.  
+
The '''Radiator Panel (edge)''' is a fixed [[radiator]] used to dissipate waste heat into space (and [[atmosphere]]), by pumping it out of nearby hot parts on the craft, when active, consuming a small amount of [[electric charge]] (1.5 per minute).
  
Part heat may be accumulated from external sources (e.g. [[re-entry]] or sunlight from [[Kerbol]]) or be generated by [[reaction engine]]s or the cores of [[resource harvester]] drills or [[converter]]s, while they are active. To be cooled, a part must be connected directly to the radiator, or to a part that is, in turn, directly connected to the radiator.  
+
Part heat may be accumulated from external sources (e.g. [[re-entry]] or sunlight from [[Kerbol]]) or be generated by [[reaction engine]]s or the cores of [[resource harvester]] drills or [[converter]]s, while they are active. To be cooled by this radiator, a part must be connected directly, or to a part that is, in turn, connected directly. Radiators make themselves hotter to perform efficiently, but self-limit to avoid heating to destruction.
  
Unlike the deployable Thermal Control Systems, these panels can be used as structural elements, with other parts attached to them, and are not especially prone to breaking from aerodynamic forces.
+
Unlike the deployable Thermal Control Systems, these panels can be used as structural elements, with other parts attached to them, and are not especially prone to breaking from aerodynamic forces. By default, they stick out at 90 degrees to the surface they are attached to.
  
 
== Product description ==
 
== Product description ==

Revision as of 18:17, 16 March 2017

Radiator Panel (edge)
Part image
Radiator by
Probodobodyne Inc

Radial size Radial mounted
Cost (total) 450.00 Funds
Mass (total) 0.03000 t
Drag 0.2
Max. Temp. 2500 K
Volume  ?
Impact Tolerance 12 m/s
Research Basic science.png Basic Science
Unlock cost 2 200 Funds
Since version 1.0.5
Part configuration radPanelEdge.cfg
Electricity required 0.025 /s
Dissipated heat 7500
Retractable No

The Radiator Panel (edge) is a fixed radiator used to dissipate waste heat into space (and atmosphere), by pumping it out of nearby hot parts on the craft, when active, consuming a small amount of electric charge (1.5 per minute).

Part heat may be accumulated from external sources (e.g. re-entry or sunlight from Kerbol) or be generated by reaction engines or the cores of resource harvester drills or converters, while they are active. To be cooled by this radiator, a part must be connected directly, or to a part that is, in turn, connected directly. Radiators make themselves hotter to perform efficiently, but self-limit to avoid heating to destruction.

Unlike the deployable Thermal Control Systems, these panels can be used as structural elements, with other parts attached to them, and are not especially prone to breaking from aerodynamic forces. By default, they stick out at 90 degrees to the surface they are attached to.

Product description

A radially attachable radiator panel to help dissipate heat into space.

Probodobodyne Inc.

Core Cooling

The limiting factor for cooling the cores of drills and converters is the "Core Heat xFer" (transfer) limit of this radiator: 150kW.

This is substantially lower than what the part can actually dissipate, under most circumstances, with a "Max Cooling" figure of: 2234kW.

To maintain an active drill or converter core at optimal thermal efficiency, there must be enough connected radiators with unused Core Heat Transfer capacity to fulfil the "Required Cooling" stat, as listed below:

Image Part Required Cooling (kW) Max Cooling(kW)
'Drill-O-Matic Junior' Mining Excavator.png
'Drill-O-Matic Junior' Mining Excavator 50 50
DrillOMatic.png
'Drill-O-Matic' Mining Excavator 100 100
Convert-O-Tron 125.png
Convert-O-Tron 125 100 50*
ISRU Converter.png
Convert-O-Tron 250 200 500

(*) Note: the Convert-O-Tron 125 can not be maintained at optimal thermal efficiency because its max cooling cap is below its required cooling stat.

Changes

1.2
  • Moved from Utility to Thermal
1.0.5
  • Initial release