Difference between revisions of "Synchronous orbit"

From Kerbal Space Program Wiki
Jump to: navigation, search
(Semi-synchronous and similar orbits: -you; !the orbit must be super synchronous;)
(Reworked majority of sentences to flow better and improve grammar/mechanics. Introduced sub-section for stationary orbits and advantages of synchronous orbits. Moved Sun-synch to Semi-synch & similar. Clarified titles. New sections need more content.)
Line 1: Line 1:
A '''synchronous orbit''' is an orbit with the same orbital period as the rotational period of the orbited body. The eccentricity and inclination aren't bound to specific values, although the orbit shouldn't intersect with the atmosphere or surface of the orbited body. Satellites on a synchronous have a ground track forming an [[w:Analemma|analemma]].
+
A '''synchronous orbit''' is an orbit where the orbital period equals the rotation rate of the orbited body. The eccentricity and inclination are not bound to specific values, although to be synchronous the orbit must not intersect with the atmosphere or surface of the orbited body, causing the orbit to change. Satellites in synchronous orbits have a [[w:Ground track|ground track]] forming an [[w:Analemma|analemma]].
  
A '''stationary orbit''' is a special kind of synchronous orbit where the ground track is only a point. Additionally to the orbital period is the eccentricity equal to 0 and the inclination is exactly 0°. A satellite on this orbit will stay in the sky at the same position at all times and the surface velocity is zero. This makes the communication easy as the ground based antennae don't have to follow the satellite's relative motion. Because it is impossible to get all values exact for a stationary orbit, also satellites in stationary orbits form a small analemma.
+
== Stationary orbits ==
 +
'''Stationary orbits''' are a special kind of synchronous orbit. Its 0° inclination and its eccentricity of 0 cause its ground track to be only a point: a satellite in this orbit has no motion relative to the body's surface. Since it is impossible to get all orbital values exact for a stationary orbit, satellites in stationary orbits form small analemmata.
  
Some celestial bodies don't allow synchronous orbits, and thus also no stationary orbits, because the altitude lies outside the celestial bodies' sphere of influence. This is because of a very slow rotation requiring a very high altitude to allow such long orbital periods explaining why all tidally locked moons don't have a synchronous orbits. [[Moho]] is the only planet without any synchronous orbit, because it's very slow rotational period with only almost two rotations in one orbit.
+
Some celestial bodies don't allow for synchronous orbits because the altitude required to synchronously orbit is beyond the body's sphere of influence. The body's slow rotation rate causes this effect: a very high altitude is necessary to allow for such a long orbital period. Tidally locked moons don't have synchronous orbit possibilities either because of their slow rotation. [[Moho]] is the only planet without any possibilities for a craft to achieve a synchronous orbit because of its very slow rotational period; Moho completes approximately two rotations during the time it takes for an object in the highest possible orbit to complete a revolution.
 
 
An advantage of an synchronous orbit is that they allow dropping multiple [[payload]]s from one [[craft]] because the orbit will go above the same point on the body's surface periodically. Usually the orbit has a large eccentricity so that the payload has to do only a minimum of maneuvers to reach the surface. In this case the payload is detached at the apoapsis and decelerated so that it lands on the celestial body. After the payload is successfully landed, the next payload can be dropped as soon as the craft reaches the apoapsis again.
 
  
 
== Semi-synchronous and similar orbits ==
 
== Semi-synchronous and similar orbits ==
When the orbital period is half as long as the rotational period, the orbit is usually called semi-synchronous orbit. It is possible to calculate the semi-major axis of a semi-synchronous orbit using [[w:Kepler's_laws_of_planetary_motion|Kepler's third law of planetary motion]]. With the knowledge about the semi-major axis of a synchronous orbit and the [[w:Ratio|ratio]] between the two orbits:
+
When the orbital period is half as long as the rotational period, the orbit is usually described as semi-synchronous. It is possible to calculate the semi-major axis of a semi-synchronous orbit using [[w:Kepler's_laws_of_planetary_motion|Kepler's third law of planetary motion]]. With the knowledge about the semi-major axis of a synchronous orbit and the [[w:Ratio|ratio]] between the two orbits:
 
:<math>a_\frac{1}{f} = \frac{1}{\sqrt[3]{f^2}} \cdot a_1</math>
 
:<math>a_\frac{1}{f} = \frac{1}{\sqrt[3]{f^2}} \cdot a_1</math>
 
The fraction ''f'' is the quotient of the period of the synchronous orbit (''a<sub>1</sub>'') and second orbit (''a<sub>1/f</sub>''). When the second orbit is a semi-synchronous orbit this quotient is 2:
 
The fraction ''f'' is the quotient of the period of the synchronous orbit (''a<sub>1</sub>'') and second orbit (''a<sub>1/f</sub>''). When the second orbit is a semi-synchronous orbit this quotient is 2:
 
:<math>a_\frac{1}{2} = \frac{1}{\sqrt[3]{2^2}} \cdot a_1 = \frac{1}{\sqrt[3]{4}} \cdot a_1</math>
 
:<math>a_\frac{1}{2} = \frac{1}{\sqrt[3]{2^2}} \cdot a_1 = \frac{1}{\sqrt[3]{4}} \cdot a_1</math>
  
An orbit where the orbital period is lower than the rotational period has some advantages, as some bodies don't allow synchronous orbits but semi-synchronous orbits.  
+
An orbit where the orbital period is lower than the rotational period has some advantages, as some bodies don't allow synchronous orbits but opportunities for semi-synchronous orbits.
 +
 
 +
When dropping numerous payloads that should land nearby each other, the orbit should be an integer multiple of the celestial body's sidereal day. This way, the body stays the same relative to the orbit and has the same descent route, if each payload is detached at the same point in the orbit (e.g. [[apoapsis]]). The inverse factor ''f'' (= 1/''f'') defines how many days are between two detachments. For example, a super-synchronous orbit has f=1/2 so a payload could be dropped every two sidereal days or, when orbiting Kerbin, one every twelve hours.
 +
 
 +
An example of a semi-synchronous orbit for real world scientific applications is a [[w:Molniya orbit|Molniya orbit]].
  
When dropping numerous payloads which should land nearby to each other the orbit should be a integer multiple of the celestial body's sidereal day. This way the body stays the same relative to the orbit and has the same descent route, if each payload is detached at the same point in the orbit (e.g. [[apoapsis]]). The inverse factor ''f'' (= 1/''f'') defines how many days are between two detachments. For example, a super-synchronous orbit has f=1/2 so a payload could be dropped every two sidereal days or, when orbiting Kerbin, one every twelve hours.
+
=== Sun-synchronous orbit ===
 +
:{{See also||{{Wikipedia|Sun-synchronous orbit}}}}
 +
In the real world, there exists a sun-synchronous orbit. It's important to note that, although the name implies it, the orbit is not synchronous around the Sun. Instead, it describes an orbit around Earth which itself rotates, such that it appears the orbiting object is motionless relative to the Sun. Since it requires objects to have uneven gravitational fields, it is impossible to simulate in KSP.
  
One example for a semi-synchronous orbit in real world science is a [[w:Molniya orbit|Molniya orbit]].
+
== Advantages of synchronous orbits ==
 +
One advantage of a synchronous orbit is that they allow dropping multiple [[payload]]s from one [[craft]], because the orbit will  periodically travel above the same point on the body's surface. Usually, the orbit has a large eccentricity so that the payload has to complete a minimal amount of maneuvers to reach the surface. In this case the payload is detached at the apoapsis and decelerated such that it lands on the celestial body. After the payload has successfully landed, the next payload can be dropped as soon as the craft reaches the apoapsis again.
 +
=== Advantages of stationary orbits ===
 +
Communication to a satellite in a stationary orbit is easier than if it was in another orbit, as the ground based antennae do not have to move to account for the satellite's motion relative to the orbited body.  
  
== Altitudes and semi-major axes ==
+
== Orbital altitudes and semi-major axes of Kerbal's major bodies  ==
The following table, contain the altitudes for a circular synchronous orbit around all celestial bodies, even when the altitude resides outside the SOI. The altitudes are from the body's surface, while the semi-major axes are from the body's center.
+
The following table contains the altitudes for circular, synchronous orbits around all of Kerbal's celestial bodies, even when the altitude resides outside the SOI. The altitudes are relative to the body's surface, while the semi-major axes are measured from the body's center.
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 52: Line 60:
 
* † indicates that the altitude resides outside the SOI
 
* † indicates that the altitude resides outside the SOI
 
* ‡ indicates that the altitude is the same as the orbit of another object
 
* ‡ indicates that the altitude is the same as the orbit of another object
 
== Sun-synchronous orbit ==
 
:{{See also||{{Wikipedia|Sun-synchronous orbit}}}}
 
In the real world exists a sun-synchronous orbit, which isn't like a synchronous orbit around the Sun. Instead it describes an orbit around Earth which itself rotates, so it looks like the orbit stays the same relative to the Sun. As it requires an uneven gravitational field it is impossible to simulate in KSP.
 
  
 
== See also ==
 
== See also ==

Revision as of 19:17, 3 May 2015

A synchronous orbit is an orbit where the orbital period equals the rotation rate of the orbited body. The eccentricity and inclination are not bound to specific values, although to be synchronous the orbit must not intersect with the atmosphere or surface of the orbited body, causing the orbit to change. Satellites in synchronous orbits have a ground track forming an analemma.

Stationary orbits

Stationary orbits are a special kind of synchronous orbit. Its 0° inclination and its eccentricity of 0 cause its ground track to be only a point: a satellite in this orbit has no motion relative to the body's surface. Since it is impossible to get all orbital values exact for a stationary orbit, satellites in stationary orbits form small analemmata.

Some celestial bodies don't allow for synchronous orbits because the altitude required to synchronously orbit is beyond the body's sphere of influence. The body's slow rotation rate causes this effect: a very high altitude is necessary to allow for such a long orbital period. Tidally locked moons don't have synchronous orbit possibilities either because of their slow rotation. Moho is the only planet without any possibilities for a craft to achieve a synchronous orbit because of its very slow rotational period; Moho completes approximately two rotations during the time it takes for an object in the highest possible orbit to complete a revolution.

Semi-synchronous and similar orbits

When the orbital period is half as long as the rotational period, the orbit is usually described as semi-synchronous. It is possible to calculate the semi-major axis of a semi-synchronous orbit using Kepler's third law of planetary motion. With the knowledge about the semi-major axis of a synchronous orbit and the ratio between the two orbits:

The fraction f is the quotient of the period of the synchronous orbit (a1) and second orbit (a1/f). When the second orbit is a semi-synchronous orbit this quotient is 2:

An orbit where the orbital period is lower than the rotational period has some advantages, as some bodies don't allow synchronous orbits but opportunities for semi-synchronous orbits.

When dropping numerous payloads that should land nearby each other, the orbit should be an integer multiple of the celestial body's sidereal day. This way, the body stays the same relative to the orbit and has the same descent route, if each payload is detached at the same point in the orbit (e.g. apoapsis). The inverse factor f (= 1/f) defines how many days are between two detachments. For example, a super-synchronous orbit has f=1/2 so a payload could be dropped every two sidereal days or, when orbiting Kerbin, one every twelve hours.

An example of a semi-synchronous orbit for real world scientific applications is a Molniya orbit.

Sun-synchronous orbit

→ See also: Sun-synchronous orbit on Wikipedia

In the real world, there exists a sun-synchronous orbit. It's important to note that, although the name implies it, the orbit is not synchronous around the Sun. Instead, it describes an orbit around Earth which itself rotates, such that it appears the orbiting object is motionless relative to the Sun. Since it requires objects to have uneven gravitational fields, it is impossible to simulate in KSP.

Advantages of synchronous orbits

One advantage of a synchronous orbit is that they allow dropping multiple payloads from one craft, because the orbit will periodically travel above the same point on the body's surface. Usually, the orbit has a large eccentricity so that the payload has to complete a minimal amount of maneuvers to reach the surface. In this case the payload is detached at the apoapsis and decelerated such that it lands on the celestial body. After the payload has successfully landed, the next payload can be dropped as soon as the craft reaches the apoapsis again.

Advantages of stationary orbits

Communication to a satellite in a stationary orbit is easier than if it was in another orbit, as the ground based antennae do not have to move to account for the satellite's motion relative to the orbited body.

Orbital altitudes and semi-major axes of Kerbal's major bodies

The following table contains the altitudes for circular, synchronous orbits around all of Kerbal's celestial bodies, even when the altitude resides outside the SOI. The altitudes are relative to the body's surface, while the semi-major axes are measured from the body's center.

Body Synchronous orbit Semi-synchronous orbit Tidally
locked
Altitude Semi-major axis Altitude Semi-major axis
Kerbol 1 508 045.29 km 1 769 645.29 km 853 206.67 km 1 114 806.67 km
Moho 18 173.17 km † 18 423.17 km † 11 355.87 km † 11 605.87 km † No
Eve 10 328.47 km 11 028.47 km 6 247.50 km 6 947.50 km No
Gilly 42.14 km 55.14 km 21.73 km 34.73 km No
Kerbin 2 863.33 km 3 463.33 km 1 581.76 km 2 181.76 km No
Mun 2 970.56 km † 3 170.56 km † 1 797.33 km 1 997.33 km Yes
Minmus 357.94 km 417.94 km 203.29 km 263.29 km No
Duna 2 880.00 km ‡ 3 200.00 km 1 695.87 km 2 015.87 km No
Ike 1 133.90 km † 1 263.90 km † 666.20 km 796.20 km Yes
Dres 732.24 km 870.24 km 410.22 km 548.22 km No
Jool 15 010.46 km 21 010.46 km 7 235.76 km 13 235.76 km No
Laythe 4 686.32 km † 5 186.32 km † 2 767.18 km 3 267.18 km Yes
Vall 3 593.20 km † 3 893.20 km † 2 152.56 km † 2 452.56 km † Yes
Tylo 14 157.88 km † 14 757.88 km † 8 696.88 km 9 296.88 km Yes
Bop 2 588.17 km † 2 653.17 km † 1 606.39 km † 1 671.39 km † Yes
Pol 2 415.08 km † 2 459.08 km † 1 505.12 km † 1 549.12 km † Yes
Eeloo 683.69 km 893.69 km 352.99 km 562.99 km No
  • † indicates that the altitude resides outside the SOI
  • ‡ indicates that the altitude is the same as the orbit of another object

See also