TVR-1180C Mk1 Stack Tri-Coupler

From Kerbal Space Program Wiki
Revision as of 16:51, 11 May 2013 by SirBenjiful (talk | contribs) (Usage)
Jump to: navigation, search
TVR-1180C Mk1 Stack Tri-Coupler
Part image
Adapter by
O.M.B. Demolition Enterprises

Radial size Small
Cost (total) 680.00 Funds
Mass (total) 0.15 t
Drag 0.3
Max. Temp. 2000 K
Volume  ?
Impact Tolerance 12 m/s
Research Advanced construction.png Advanced Construction
Unlock cost 2 100 Funds
Since version 0.7.3
Part configuration stackTriCoupler.cfg
Outgoing connectors 3

The TVR-1180C Mk1 Stack Tri-Coupler is an Adapter that allows for a single rocket to branch into 3 separate stacks.

Usage

All Nodes on the TVR-1180C are designed for attaching parts with a diameter of 1 meter. As with all adapters, Liquid Fuel will flow through it. Despite the similar name, the TVR-1180C is not a Decoupler; it does not jettison anything nor does it add a stage to the rocket. It branches into 3 separate stacks, but they are unsupported and prone to bending or breaking if the weight and thrust are not properly distributed. Rockets incorporating a tri-coupler are also likely to wobble, unless the stacks are opportunely bound together with struts. The tricoupler is also subtly asymmetrical, so rockets must have control options to correct for induced pitch, yaw, and/or roll.

Another, unconventional use of this part is as a landing 'foot' - when landing very large craft (such as bases), the stock landing legs aren't big or powerful - using the strut parts as 'legs' and the tricoupler as a 'foot', you can artificially make your own landing leg!

Description

The Stack Tricoupler! If your stack is lacking in awesomeness, this is the tool for you! Just remember that this is not a decoupler, and won't separate stages.

O.M.B. Demolition Enterprises

Changes

0.18
  • Retextured
0.16
  • Mass reduced from 0.8 to 0.3 (part rebalancing)
0.15
  • (Undocumented part of fuel flow changes) added NoCrossFeedNodeKey = bottom (keeps fuel from flowing FROM the bottom nodes to prevent stack imbalances and such)
0.8.5
  • Replaced tricoupler textures and UV mapping (UV map by Dippeggs)
0.8.1
  • Fuel can now flow through Strut parts like the tricoupler
0.8
  • (Bug fix) VAB placement bug with tricouplers and fuel tanks (and decouplers)
0.7.3
  • Initial Release