Difference between revisions of "Tutorial: Spaceplane basics"

From Kerbal Space Program Wiki
Jump to: navigation, search
m (fixing grammer problem...)
Line 1: Line 1:
If you're tired of big rockets that use tons of fuel and disintegrate in the atmosphere when coming back to Kerbin, this tutorial is perfect for you! This tutorial will help you with the basics of spaceplane flight, and will help you avoid the most common errors that could ruin your perfect day as a spaceplane pilot! This is just a general briefing section with lots of "to do" or "not to do" things: when you think you've got it, check the [[Tutorial:Aeris 4A mission|Aeris 4A tutorial mission]] to learn how to get into space easily. Note: This tutorial was last updated for version 1.0.5.
+
If you're tired of big rockets that use tons of fuel and disintegrate in the atmosphere when coming back to Kerbin, this tutorial is perfect for you! This tutorial will help you with the basics of spaceplane flight, and will help you avoid the most common errors that could ruin your perfect day as a spaceplane pilot! This is just a general briefing section with lots of "to do" or "not to do" things: when you think you've got it, check the [[Tutorial:Aeris 4A mission|Aeris 4A tutorial mission]] to learn how to get into space easily. Note: This tutorial was last updated for version 1.3.0.
  
 
== Jet section ==
 
== Jet section ==
Line 6: Line 6:
 
=== Engines ===
 
=== Engines ===
 
{{Main article|Jet engines}}
 
{{Main article|Jet engines}}
While it's true that jet engines don't work in space, they offer one large advantage over rocket engines while inside the atmosphere: fuel efficiency. One FL-T100 tank can't power any rocket into space, yet a Shock cone intake, a Mk 1 inline cockpit, a FL-T100 and [[J-X4 "Whiplash" Turbo Ramjet Engine]] aimed in the general direction of "up" will let you laugh your way past the 70km mark at 1100m/s TWICE before running out of fuel. The Whiplash's ridiculous fuel efficiency allows a spaceplane to climb high into the atmosphere and gain a lot of speed while barely using any fuel at all.
+
While it's true that jet engines don't work in space, they offer one large advantage over rocket engines while inside the atmosphere: fuel efficiency. One [[FL-T100 Fuel Tank|FL-T100]] tank can't power any rocket into space, yet a [[Shock Cone Intake]], a [[Mk1 Inline Cockpit]], a FL-T100 and [[J-X4 "Whiplash" Turbo Ramjet Engine]] aimed in the general direction of "up" will let you laugh your way past the 70km mark at 1100m/s TWICE before running out of fuel. The Whiplash's ridiculous fuel efficiency allows a spaceplane to climb high into the atmosphere and gain a lot of speed while barely using any fuel at all.
  
 
[[CR-7 R.A.P.I.E.R. Engine|Rapiers]] generally provide less thrust than a Whiplash at speeds below mach 2, but provide more thrust at higher speeds. They are able to operate at higher altitudes and can even continue operating in a vacuum by switching to a rocket mode. This makes them a very effective choice for SSTOs since they do a good job of getting maximum velocity out of air-breathing mode, and then allow you to use oxidizer without needing the added weight and drag of a separate rocket engine.
 
[[CR-7 R.A.P.I.E.R. Engine|Rapiers]] generally provide less thrust than a Whiplash at speeds below mach 2, but provide more thrust at higher speeds. They are able to operate at higher altitudes and can even continue operating in a vacuum by switching to a rocket mode. This makes them a very effective choice for SSTOs since they do a good job of getting maximum velocity out of air-breathing mode, and then allow you to use oxidizer without needing the added weight and drag of a separate rocket engine.
Line 27: Line 27:
 
=== Wings ===
 
=== Wings ===
 
{{Main article|Wing}}
 
{{Main article|Wing}}
As you would expect, spaceplanes need wings: they have various shapes and dimensions, and they differ basically in lift rating: you will want to have enough lift to keep your fuselage approximately prograde during your ascent to orbit. Wing shapes do not appear to have a significant impact on drag or drag-to-lift ratio at this time, but swept wings are an easy way to ensure that your center of lift stays behind your center of mass. Note that the lift rating does not mean that the wings will automatically lift a spaceplane into the air when it's moving forward. To takeoff and land at low speed, it's helpful to rotate the wings so the front is slightly above the back of the wing.
+
As you would expect, spaceplanes need wings: they have various shapes and dimensions, and they differ basically in lift rating: you will want to have enough lift to keep your fuselage approximately prograde during your ascent to orbit. Wing shapes do not appear to have a significant impact on drag or drag-to-lift ratio at this time, but swept wings are still an easy way to help ensure that your center of lift stays behind your center of mass. Note that the lift rating does not mean that the wings will automatically lift a spaceplane into the air when it's moving forward. To takeoff and land at low speed, it's helpful to rotate the wings so the front is slightly above the back of the wing. Ideally, the wings should be tilted about 3-5° from the fuselage for optimal lift-to-drag ratio.<ref name="LiftToDragRatioCharts">https://forum.kerbalspaceprogram.com/index.php?/topic/124380-wing-lift-amp-wing-lift-to-drag-ratio-charts/</ref>
  
 
For spaceplanes, avoid the FAT parts ([[FAT-455 Aeroplane Main Wing|wing]], [[FAT-455 Aeroplane Tail Fin|tail fin]], and [[FAT-455 Aeroplane Control Surface|control surface]]). These have extremely poor temperature tolerance and will almost inevitably break up during atmospheric reentry. Also avoid the [[Basic Fin|basic fin]] for the same reason.
 
For spaceplanes, avoid the FAT parts ([[FAT-455 Aeroplane Main Wing|wing]], [[FAT-455 Aeroplane Tail Fin|tail fin]], and [[FAT-455 Aeroplane Control Surface|control surface]]). These have extremely poor temperature tolerance and will almost inevitably break up during atmospheric reentry. Also avoid the [[Basic Fin|basic fin]] for the same reason.
  
If you want to carry more fuel, you should ideally use the [[Big-S Delta Wing]] as it provides the same lift-to-drag and lift-to-weight ratio as any other wing of the same mass, but it has the ability to carry fuel. This allows you to avoid the extra weight and mass of additional fuselage parts, so you only have to deal with the extra weight of the fuel.
+
If you need to carry more fuel, you should ideally use the [[Big-S Delta Wing]] as it provides the same lift-to-drag and lift-to-weight ratio as any other wing of the same mass, but it has the ability to carry fuel. This allows you to avoid the extra weight and mass of additional fuselage parts, so you only have to deal with the extra weight of the fuel.
  
 
=== Control surfaces ===
 
=== Control surfaces ===
Line 45: Line 45:
 
=== Landing gears ===
 
=== Landing gears ===
 
{{Main article|Landing gear}}
 
{{Main article|Landing gear}}
It can be helpful to use a slightly taller front landing gear and slightly shorter rear landing gears so that your fuselage points slightly upward on the ground, thereby increasing the angle of attack of your wings while on the ground. This allows you to takeoff at lower speeds and on shorter runways, and likewise for landing.
+
It can be helpful to use a slightly taller front landing gear and slightly shorter rear landing gears so that your fuselage points slightly upward on the ground, thereby increasing the angle of attack of your wings while on the ground. This allows you to takeoff at lower speeds and on shorter runways, and likewise for landing. To maximize lift, your aircraft should rest on the ground with the fuselage tilted upward at anywhere up to a 25-27° angle so that the wings will end up tilted back at 30° or less. Lift maxes out at 30° and declines beyond that point, so avoid excessive fuselage tilt.<ref name="LiftToDragRatioCharts"></ref>
 +
 
 +
It's strongly recommended to keep your landing gears well spaced from each other to ensure that the aircraft will be difficult to roll into a collision. For example, having your landing gears located near the ends of the wings is an easy way to ensure that you don't roll and shred your wings when landing or taking off. Having landing gears near the front and back of your aircraft help to ensure that you won't break your engines or smash your cockpit into the runway.
  
 
=== Piloting ===
 
=== Piloting ===
Spaceplanes generally ascend best on a 10-30 degree incline, often leveling out towards higher altitudes to pick up the maximum horizontal velocity before switching to rocket motors. Some testing is recommended with new designs to determine the best ascent profile.
+
Spaceplanes generally ascend best on a 10-30 degree incline, often leveling out towards higher altitudes to pick up the maximum horizontal velocity before switching to rocket motors. Some testing is usually required with new designs to determine the best ascent profile.
 +
 
 +
Note that as you fly higher the air intakes will become less effective and you may come to a point when the engines will shut down due to the lack of air. At that point, the plane could potentially start spinning around as a result of losing the benefit of the [[gimbal]] control of the engine. This would indicate two problems. Firstly, inadequate air intakes for the number and type of engines you're using (causing some engines to shut down before others). Secondly, it would suggest that your spaceplane's center of lift is too far forward compared to its center of gravity (causing the uncontrollable spin). You can resolve the emergency by transferring fuel from rear fuel tanks to forward fuel tanks, but you should alter your design to bring your wings further back to prevent such incidents in the future.
  
Note that as you fly higher the air intakes will become less effective and you may come to a point when the engines will shut down, due to the lack of air. At that point, the plane could start spinning around as a result of losing the benefit of the [[gimbal]] control of the engine. This indicates two problems. Firstly, inadequate air intakes for the number and type of engines you're using (causing some engines to shut down before others). Secondly, it suggests that your spaceplane's center of lift is too far forward compared to its center of gravity (causing the uncontrollable spin). You can resolve the emergency by transferring fuel from rear fuel tanks to forward fuel tanks, but you should alter your design to bring your wings further back to prevent such incidents in the future. Once your jet engines have shut down, you will need to start the second part of your space mission. When your jet engines shut down simultaneously while climbing in otherwise normal flight, it is generally due to a lack of pressure from the altitude you're flying at. Increasing the number of intakes will not resolve this problem.
+
If, instead, all goes well, then once your jet engines have shut down you will need to start the second part of your space mission. Note that when your jet engines shut down simultaneously while climbing in otherwise normal flight, it is generally due to a lack of pressure from the altitude you're flying at. Increasing the number of intakes will not resolve this problem.
  
 
== Rocket section ==
 
== Rocket section ==
Line 61: Line 65:
  
 
=== Atmospherhic re-entry ===
 
=== Atmospherhic re-entry ===
To handle re-entry, it's recommended to start your approach back into the atmosphere at a shallow angle, ideally with a periapsis of around 30-35 km. Keep your spaceplane pointed about 90 degrees above prograde so that the wings and body of your aircraft slow you down as much as possible. You may also want to deploy your landing gears to increase your drag, as well as airbrakes if you have them. As you approach 35-50 km, your aircraft will most likely level itself out, at which point you can try aiming about five degrees above the horizon line. If your aircraft is burning up during this stage, you may need larger wings to slow you down faster, [[radiator|radiator panels]] to carry away the heat more effectively, parts with a higher temperature tolerance (like the [[Mk2 Liquid Fuel Fuselage|Mk2 liquid fuel fuselage]] instead of the [[Mk1 Liquid Fuel Fuselage|Mk1 liquid fuel fuselage]]), or parts to increase your maneuverability, like [[Reaction Control System|RCS thrusters]], [[reaction wheel]]s, or canards and elevons.
+
To survive re-entry, it's recommended to start your approach back into the atmosphere at a shallow angle, ideally with a periapsis of around 30-35 km. Keep your spaceplane pointed about 90 degrees above prograde so that the wings and body of your aircraft slow you down as much as possible. You may also want to deploy your landing gears to increase your drag, as well as airbrakes if you have them. As you approach 35-50 km, your aircraft will most likely level itself out, at which point you can try aiming about five degrees above the horizon line. If your aircraft is burning up during this stage, you may need larger wings to slow you down faster, [[radiator|radiator panels]] to carry away the heat more effectively, parts with a higher temperature tolerance (like the [[Mk2 Liquid Fuel Fuselage|Mk2 liquid fuel fuselage]] instead of the [[Mk1 Liquid Fuel Fuselage|Mk1 liquid fuel fuselage]]), or parts to increase your maneuverability, like [[Reaction Control System|RCS thrusters]], [[reaction wheel]]s, or canards and elevons.
 +
 
 +
Alternatively, if you're returning from a high orbit or from an interplanetary trip, you can try repeated shallow passes through the atmosphere. With initial passes, you start off with a periapsis at 50-60 km and gradually lower your apoapsis until you're in an almost circularized low orbit and then transition to your usual re-entry approach. If you've been able to successfully re-enter on previous low orbit test runs, you should be able to use this method to achieve similar rates of success once you've slowed down sufficiently.
  
 
=== Landing ===
 
=== Landing ===
Landing can be trickier for spaceplanes since they are designed for higher speeds than other aircraft and may not be able to fly level at speeds low enough for an easy landing (<50 m/s). When dealing with high-speed landings, you may touchdown too quickly and cause the front of the plane to smack into the runway. After a successful touchdown, high-speed motion on the runway (let alone uneven ground) can be unstable, causing the aircraft to careen to one side or the other, potentially resulting in loss of a wing and sometimes the entire aircraft. Landing also often requires rapid deceleration to avoid running off the end of the runway or crashing into a slope when landing on open terrain.  
+
Landing can be trickier for spaceplanes since they are designed for higher speeds than other aircraft and may not be able to fly level at speeds low enough for an easy landing (<50 m/s). When dealing with high-speed landings, you may touch down too quickly and cause the front of the plane to smack into the runway. After a successful touchdown, high-speed motion on the runway (let alone uneven ground) can be unstable, causing the aircraft to careen to one side or the other, potentially resulting in loss of a wing and sometimes the entire aircraft. Landing also often requires rapid deceleration to avoid running off the end of the runway or crashing into a slope when landing on open terrain.  
  
 
All of these problems can be exacerbated or reduced by adjusting the amount of fuel in your tanks during landing. Close to empty tanks will allow you to fly slower, decelerate faster, and reduce touchdown strain. Ideally, you ought to test landing the spaceplane with full fuel tanks and with nearly empty fuel tanks prior to taking your spaceplane to orbit. If your spaceplane is difficult to land when full of fuel but easy to land when empty, then it may be helpful to burn off or transfer out most of the excess fuel before landing to make the aircraft lighter. In subsequent missions, you may want to launch with less fuel to cut down on cost and make landing a quicker and easier process.
 
All of these problems can be exacerbated or reduced by adjusting the amount of fuel in your tanks during landing. Close to empty tanks will allow you to fly slower, decelerate faster, and reduce touchdown strain. Ideally, you ought to test landing the spaceplane with full fuel tanks and with nearly empty fuel tanks prior to taking your spaceplane to orbit. If your spaceplane is difficult to land when full of fuel but easy to land when empty, then it may be helpful to burn off or transfer out most of the excess fuel before landing to make the aircraft lighter. In subsequent missions, you may want to launch with less fuel to cut down on cost and make landing a quicker and easier process.
  
To recover the most value from your spaceplane, you should try to land on the runway at the Space Center ([[Tutorial: Land at the Space Center|this tutorial]], although it has been written for spacecraft and not spaceplanes, is a great help). If that's not an option, you can still recover some value by landing at any suitable flat place on Kerbin. You can even try refueling it before recovering your spaceplane further increasing your recovering value. Be aware that landing on water is possible if your spaceplane can fly level at less than ~40-50 m/s.
+
To recover the most value from your spaceplane, you should try to land on the runway at the Space Center ([[Tutorial: Land at the Space Center|this tutorial]], although it has been written for spacecraft and not spaceplanes, is a great help). If that's not an option, you can still recover some value by landing at any suitable flat place on Kerbin. You can even try refueling it before recovering your spaceplane further increasing your recovering value. Be aware that landing on water is an option if your spaceplane can fly level at less than ~40-50 m/s.
  
 
==== Landing speed ====
 
==== Landing speed ====
Line 88: Line 94:
  
 
==== Deceleration ====
 
==== Deceleration ====
Even with a stable landing, you may find that you don't have enough room on the runway to come to a stop before you reach the end. To minimize the risk of such a situation, try to land on a patch of flat ground leading downwards a downhill slope. A good example of this is at the KSC runway, when landing on a 90 degree bearing. If you can't slow down in time, you can simply flick your engines back on to take off and turn around for another try as you pass over the coast. If you attempt a landing at KSC on a 180 degree bearing, you run the risk of colliding with the upward slope shortly beyond the runway. Similar principles apply when finding suitable landing sites away from the KSC.
+
Even with a stable landing, you may find that you don't have enough room on the runway to come to a stop before you reach the end. To minimize the risk of such a situation, try to land on a patch of flat ground approaching a downhill slope. A good example of this is at the KSC runway when landing on a 90 degree bearing. If you can't slow down in time, you can simply flick your engines back on to take off and turn around for another try as you pass over the coast. In contrast, yf you attempt a landing at KSC on a 180 degree bearing, you run the risk of colliding with the upward slope shortly beyond the runway if you can't slow down. Similar principles apply when finding suitable landing sites away from the KSC.
  
To slow down faster, you can increase the breaking strength of your rear wheels. You can also use parachutes on landing, but care must be taken to ensure that an adequate length of runway remains since you'll only get one chance to use them. If you have a very short length of runway remaining and your parachutes can't slow you down fast enough, you'll be forced to cut the chutes and attempt a second landing without them. That said, parachutes are an exceedingly effective means of reducing your stopping distance. Note that a [[J-33 "Wheesley" Turbofan Engine|Wheesley]] or [[J-90 "Goliath" Turbofan Engine|Goliath]] engine can reverse its thrust to allow rapid deceleration during landing, but these are not recommended for a spaceplane due to being unreasonably heavy and inducing excessive drag when attempting to transition to orbital velocities.
+
To slow down faster, you can increase the braking strength of your rear wheels. You can also use parachutes on landing, but care must be taken to ensure that an adequate length of runway remains since you'll only get one chance to use them. If you have a very short length of runway remaining and your parachutes can't slow you down fast enough, you'll be forced to cut the chutes and attempt a second landing without them. That said, parachutes are an exceedingly effective means of reducing your stopping distance. Note that a [[J-33 "Wheesley" Turbofan Engine|Wheesley]] or [[J-90 "Goliath" Turbofan Engine|Goliath]] engine can reverse its thrust to allow rapid deceleration during landing, but these are not recommended for a spaceplane due to being unreasonably heavy and inducing excessive drag when attempting to transition to orbital velocities.
  
 
== See also ==
 
== See also ==
Line 96: Line 102:
 
* [[Tutorial:Basic SSTO Design]]
 
* [[Tutorial:Basic SSTO Design]]
 
* [[Tutorial:Spaceplane to Laythe]]
 
* [[Tutorial:Spaceplane to Laythe]]
 +
 +
== References ==
  
 
[[Category:Tutorials|Tutorial: Spaceplane basics]]
 
[[Category:Tutorials|Tutorial: Spaceplane basics]]

Revision as of 08:56, 11 September 2017

If you're tired of big rockets that use tons of fuel and disintegrate in the atmosphere when coming back to Kerbin, this tutorial is perfect for you! This tutorial will help you with the basics of spaceplane flight, and will help you avoid the most common errors that could ruin your perfect day as a spaceplane pilot! This is just a general briefing section with lots of "to do" or "not to do" things: when you think you've got it, check the Aeris 4A tutorial mission to learn how to get into space easily. Note: This tutorial was last updated for version 1.3.0.

Jet section

While having the same stock parts as in the VAB, spaceplane design is quite different from pure rocket design. First of all, since the launch happens horizontally, you will have to include landing gears, and you will most likely want to include jet engines for the first stage for excellent fuel and cost efficiency.

Engines

→ Main article: Jet engines

While it's true that jet engines don't work in space, they offer one large advantage over rocket engines while inside the atmosphere: fuel efficiency. One FL-T100 tank can't power any rocket into space, yet a Shock Cone Intake, a Mk1 Inline Cockpit, a FL-T100 and J-X4 "Whiplash" Turbo Ramjet Engine aimed in the general direction of "up" will let you laugh your way past the 70km mark at 1100m/s TWICE before running out of fuel. The Whiplash's ridiculous fuel efficiency allows a spaceplane to climb high into the atmosphere and gain a lot of speed while barely using any fuel at all.

Rapiers generally provide less thrust than a Whiplash at speeds below mach 2, but provide more thrust at higher speeds. They are able to operate at higher altitudes and can even continue operating in a vacuum by switching to a rocket mode. This makes them a very effective choice for SSTOs since they do a good job of getting maximum velocity out of air-breathing mode, and then allow you to use oxidizer without needing the added weight and drag of a separate rocket engine.

LV-N nuclear thermal rockets are commonly used on SSTOs for the rocket stage if Rapiers are not used. These have an ISP of 800 in a vacuum which is significantly better than all other rocket motors available.

Air intakes

→ Main article: Air intake

Obviously jet engines are air-breathing, so you need to include air intakes in your spaceplane. Note that most air intakes tend to produce less drag than aerodynamic nose cones and pointy cockpits, especially shock cone intakes. As such, you may want to line all forward Mk1 radial nodes on your aircraft with shock cones, if possible. Also note that shock cone intakes appear to provide the best performance at all mach speeds, and unlike other air intakes, they do not decline in performance beyond certain mach speeds. (Source)

Be warned that if you do not provide sufficient air intakes for the engines you've placed, you may find that some of your engines shut down before others. In an aircraft with two or more engines, this can potentially cause you to enter a flat spin and this can be unrecoverable if your center of mass is behind your center of lift. However, don't go overboard with intakes because your engines will still shut off at high altitudes due to the low air pressure regardless of how many intakes you have.

Fuselages

It is worth noting that jet fuselages, since they don't carry oxidizer, are lighter than normal liquid fuel tanks. However, the Mk2 and Mk3 fuselages aren't rounded and they have their own adapters (which also act as additional fuel tanks) to connect them to the other rounded stock parts. The Mk2 and Mk3 cockpits match the Mk2 and Mk3 fuselages, greatly simplifying the process of designing a plane with these cockpits.

Note that Mk2 fuselages produce tiny amounts of lift and much larger amounts of drag. Compared to a Mk1 fuselage, a Mk2 fuselage produces about 7-8x more drag. A Mk1 fuselage produces no lift, while a Mk2 fuselage produces about 1/3rd as much lift as it does drag. Overall, this means that Mk2 fuselages tend to be a net hindrance for space planes during the ascent into orbit, at least compared to Mk1 and Mk3 fuselages.

Temperature tolerance is also worth considering for fuselage choice. The Mk1 fuel tank only tolerates up to 2000K, while Mk2 fuselages tolerate up to 2500K, and Mk3 fuselages tolerate up to 2700K. Consequently, atmospheric reentry is less dangerous with a Mk2 or Mk3 fuselage, compared to reentry with Mk1 fuselages. Note that no wings will tolerate more than 2400K, so the difference in temperature tolerance between Mk2 and Mk3 fuselages isn't terribly significant. You probably won't have much luck landing the fuselage intact if your Mk3 plane gets its wings scorched off on reentry.

Wings

→ Main article: Wing

As you would expect, spaceplanes need wings: they have various shapes and dimensions, and they differ basically in lift rating: you will want to have enough lift to keep your fuselage approximately prograde during your ascent to orbit. Wing shapes do not appear to have a significant impact on drag or drag-to-lift ratio at this time, but swept wings are still an easy way to help ensure that your center of lift stays behind your center of mass. Note that the lift rating does not mean that the wings will automatically lift a spaceplane into the air when it's moving forward. To takeoff and land at low speed, it's helpful to rotate the wings so the front is slightly above the back of the wing. Ideally, the wings should be tilted about 3-5° from the fuselage for optimal lift-to-drag ratio.[1]

For spaceplanes, avoid the FAT parts (wing, tail fin, and control surface). These have extremely poor temperature tolerance and will almost inevitably break up during atmospheric reentry. Also avoid the basic fin for the same reason.

If you need to carry more fuel, you should ideally use the Big-S Delta Wing as it provides the same lift-to-drag and lift-to-weight ratio as any other wing of the same mass, but it has the ability to carry fuel. This allows you to avoid the extra weight and mass of additional fuselage parts, so you only have to deal with the extra weight of the fuel.

Control surfaces

→ Main article: Control surface

It is also advisable to add some control surfaces to your plane to have some control in the atmosphere: you can manually add them to the wings or choose winglets with effective control surfaces, like the Standard Canard. Keep in mind that lift rating and control surfaces are not connected: lift rating is basically the capacity of your wings to sustain the weight of your ship, while control surfaces are parts of wing that can be moved to change the flow of the air around the plane and through this change a plane's direction, angle of attack or inclination. This is an important distinction; a plane with great lift rating but without any control surfaces will fly easily but will be almost uncontrollable. Vice versa a plane with lots of control surfaces will be perfectly controllable (maybe even too much) but will have big difficulties taking off.

Control surfaces are heavier than wings. A control surface with 100% control surface portion will weigh twice as much as a wing with the same lift would weigh. As such, don't use control surfaces as substitutes for wings, and don't use more control surfaces than you need.

It is advised to place your control surfaces as far from your center of mass as possible. Ailerons to roll your aircraft should be placed as far off to the edges of your wings as possible. Canards and horizontal tail fins should be placed as far towards the front and back of your aircraft as possible, respectively. To minimize drag, vertical tail fins can be kept minimal, since aircraft can be maneuvered adequately by roll and pitch alone. Note that canards are somewhat more efficient than horizontal tail fins since canards provide an upward force with upward rotation, and downward force with downward rotation.

Also note that for maximum efficiency, you should make sure that your horizontal control surfaces are rotated to exactly the same pitch that you've rotated your wings.

Landing gears

→ Main article: Landing gear

It can be helpful to use a slightly taller front landing gear and slightly shorter rear landing gears so that your fuselage points slightly upward on the ground, thereby increasing the angle of attack of your wings while on the ground. This allows you to takeoff at lower speeds and on shorter runways, and likewise for landing. To maximize lift, your aircraft should rest on the ground with the fuselage tilted upward at anywhere up to a 25-27° angle so that the wings will end up tilted back at 30° or less. Lift maxes out at 30° and declines beyond that point, so avoid excessive fuselage tilt.[1]

It's strongly recommended to keep your landing gears well spaced from each other to ensure that the aircraft will be difficult to roll into a collision. For example, having your landing gears located near the ends of the wings is an easy way to ensure that you don't roll and shred your wings when landing or taking off. Having landing gears near the front and back of your aircraft help to ensure that you won't break your engines or smash your cockpit into the runway.

Piloting

Spaceplanes generally ascend best on a 10-30 degree incline, often leveling out towards higher altitudes to pick up the maximum horizontal velocity before switching to rocket motors. Some testing is usually required with new designs to determine the best ascent profile.

Note that as you fly higher the air intakes will become less effective and you may come to a point when the engines will shut down due to the lack of air. At that point, the plane could potentially start spinning around as a result of losing the benefit of the gimbal control of the engine. This would indicate two problems. Firstly, inadequate air intakes for the number and type of engines you're using (causing some engines to shut down before others). Secondly, it would suggest that your spaceplane's center of lift is too far forward compared to its center of gravity (causing the uncontrollable spin). You can resolve the emergency by transferring fuel from rear fuel tanks to forward fuel tanks, but you should alter your design to bring your wings further back to prevent such incidents in the future.

If, instead, all goes well, then once your jet engines have shut down you will need to start the second part of your space mission. Note that when your jet engines shut down simultaneously while climbing in otherwise normal flight, it is generally due to a lack of pressure from the altitude you're flying at. Increasing the number of intakes will not resolve this problem.

Rocket section

When your jet engines stop working, it is time to ignite the old, reliable liquid fuel engine. Keep in mind that as your altitude increases, your control surfaces and winglets will become increasingly ineffective and will no longer work at all once you leave the atmosphere, so you may need to add alternative control systems like reaction wheels or RCS thrusters.

As long as you're in space, your spaceplane won't differ from any spacecraft: you will probably want to add batteries and generators to prevent the command pod from running out of power. It is also common to add an Inline Clamp-O-Tron, which, unlike all the other docking ports, can be placed in the middle of the spacecraft (a handy solution, since there is not much space at either end of the craft) to allow your plane to dock with space stations or other spacecrafts.

Deorbiting

The most dangerous part of a spaceplane flight is returning from orbit. Re-entry heating can destroy parts of your spaceplane, or destroy it entirely. After that, you face the challenge of touching down on the ground and coming to a stop safely without rolling and breaking off a wing or taking a nosedive and blowing your aircraft up on touchdown, or rolling off of the runway and into the ocean.

Atmospherhic re-entry

To survive re-entry, it's recommended to start your approach back into the atmosphere at a shallow angle, ideally with a periapsis of around 30-35 km. Keep your spaceplane pointed about 90 degrees above prograde so that the wings and body of your aircraft slow you down as much as possible. You may also want to deploy your landing gears to increase your drag, as well as airbrakes if you have them. As you approach 35-50 km, your aircraft will most likely level itself out, at which point you can try aiming about five degrees above the horizon line. If your aircraft is burning up during this stage, you may need larger wings to slow you down faster, radiator panels to carry away the heat more effectively, parts with a higher temperature tolerance (like the Mk2 liquid fuel fuselage instead of the Mk1 liquid fuel fuselage), or parts to increase your maneuverability, like RCS thrusters, reaction wheels, or canards and elevons.

Alternatively, if you're returning from a high orbit or from an interplanetary trip, you can try repeated shallow passes through the atmosphere. With initial passes, you start off with a periapsis at 50-60 km and gradually lower your apoapsis until you're in an almost circularized low orbit and then transition to your usual re-entry approach. If you've been able to successfully re-enter on previous low orbit test runs, you should be able to use this method to achieve similar rates of success once you've slowed down sufficiently.

Landing

Landing can be trickier for spaceplanes since they are designed for higher speeds than other aircraft and may not be able to fly level at speeds low enough for an easy landing (<50 m/s). When dealing with high-speed landings, you may touch down too quickly and cause the front of the plane to smack into the runway. After a successful touchdown, high-speed motion on the runway (let alone uneven ground) can be unstable, causing the aircraft to careen to one side or the other, potentially resulting in loss of a wing and sometimes the entire aircraft. Landing also often requires rapid deceleration to avoid running off the end of the runway or crashing into a slope when landing on open terrain.

All of these problems can be exacerbated or reduced by adjusting the amount of fuel in your tanks during landing. Close to empty tanks will allow you to fly slower, decelerate faster, and reduce touchdown strain. Ideally, you ought to test landing the spaceplane with full fuel tanks and with nearly empty fuel tanks prior to taking your spaceplane to orbit. If your spaceplane is difficult to land when full of fuel but easy to land when empty, then it may be helpful to burn off or transfer out most of the excess fuel before landing to make the aircraft lighter. In subsequent missions, you may want to launch with less fuel to cut down on cost and make landing a quicker and easier process.

To recover the most value from your spaceplane, you should try to land on the runway at the Space Center (this tutorial, although it has been written for spacecraft and not spaceplanes, is a great help). If that's not an option, you can still recover some value by landing at any suitable flat place on Kerbin. You can even try refueling it before recovering your spaceplane further increasing your recovering value. Be aware that landing on water is an option if your spaceplane can fly level at less than ~40-50 m/s.

Landing speed

Landing speed (minimum speed for level flight) can be reduced by adding components to increase maneuverability, by using larger wings, by increasing wing angle of attack on the fuselage (3-5 degrees is the recommended range for a spaceplane to achieve the best lift-to-drag ratio [source]), and by decreasing the weight of the aircraft. When landing, you can achieve the highest lift for a given speed by raising the total angle of attack of your wings to 30 degrees (although this induces a great deal of drag). Be aware that while this angle will provide the lowest possible landing speed for your spaceplane, it will create problems if your center of gravity is too far ahead of your rear landing gears (causing a high-speed nose collision on touchdown) or if your rear landing gears are too far ahead of your engines, causing them to strike the runway first.

If your spaceplane is able to fly and land steadily at low speeds but just you're having difficulty slowing down as you approach the runway, try to reach your desired speed first and then approach the runway in almost level flight. You can slow down either by deploying landing gears (and airbrakes if you have them) and by repeatedly pitching up and then back down to increase your drag.

If you have trouble pitching up enough to land at a reasonable speed, you can increase your maneuverability by toggling your flaps, canards and ailerons to greater than 100% control authority.

Touchdown collisions

These occur at their worst when your center of gravity is far ahead of your rear landing gears and you have a heavy plane at high speeds and a high angle of attack on landing, resulting in your front landing gear rapidly striking the runway after your rear landing gears touchdown. Consider placing your rear landing gears close to the spaceplane's center of mass, but be careful to avoid an engine collision with the runway. It helps to have a center of gravity which is close to your engines so that the landing gears can be close to both. Alternatively, you can try landing at higher speeds with your nose pointed further down, but this increases challenges with stability and deceleration while on the runway.

Landing stability

When your spaceplane rolls shortly after touchdown, veers to one side and then explodes on the runway, you have a problem with landing stability. This is generally an issue of not spacing your landing gears out far enough apart. For an example, see the A-10 Warthog's landing gears: link. Notice how the landing gears are placed out on the wings. For a Mk1-based aircraft, your rear landing gears should not be tightly tucked together on the fuselage. Mk2 aircraft may be able to get away with it, but even then it's often best to space them further out. However, make sure to use struts when placing landing gears on the far edges of a multi-part wing because they may sag enough to cause a fuselage collision with the runway during landing.

Make sure that all of your landing gears are pointing in exactly the same direction. Even a small deviation can cause serious instability, making your aircraft bounce and jolt left and right even during takeoff.

You may also need to turn off or reduce the strength of the front brake on your aircraft. An active front brake can cause your aircraft to rapidly and uncontrollably pivot left or right during landing.

Deceleration

Even with a stable landing, you may find that you don't have enough room on the runway to come to a stop before you reach the end. To minimize the risk of such a situation, try to land on a patch of flat ground approaching a downhill slope. A good example of this is at the KSC runway when landing on a 90 degree bearing. If you can't slow down in time, you can simply flick your engines back on to take off and turn around for another try as you pass over the coast. In contrast, yf you attempt a landing at KSC on a 180 degree bearing, you run the risk of colliding with the upward slope shortly beyond the runway if you can't slow down. Similar principles apply when finding suitable landing sites away from the KSC.

To slow down faster, you can increase the braking strength of your rear wheels. You can also use parachutes on landing, but care must be taken to ensure that an adequate length of runway remains since you'll only get one chance to use them. If you have a very short length of runway remaining and your parachutes can't slow you down fast enough, you'll be forced to cut the chutes and attempt a second landing without them. That said, parachutes are an exceedingly effective means of reducing your stopping distance. Note that a Wheesley or Goliath engine can reverse its thrust to allow rapid deceleration during landing, but these are not recommended for a spaceplane due to being unreasonably heavy and inducing excessive drag when attempting to transition to orbital velocities.

See also

References

  1. 1.0 1.1 https://forum.kerbalspaceprogram.com/index.php?/topic/124380-wing-lift-amp-wing-lift-to-drag-ratio-charts/