Difference between revisions of "Radiator"

From Kerbal Space Program Wiki
Jump to: navigation, search
m (Cooling Specifications: capitalisation)
(Function: Added table of parts requiring core cooling, re-organised and re-wrote section.)
Line 16: Line 16:
 
Radiators only remove heat from the inside of parts (which constitute the vast majority of their [https://en.wikipedia.org/wiki/Heat_capacity thermal capacity]), not their skin, which may be at a very different temperature. Heat may be accumulated from external sources (e.g. re-entry or sunlight from Kerbol) or be generated by [[reaction engines]] or the cores of [[resource harvester]] drills or [[converter]]s, while they are active.
 
Radiators only remove heat from the inside of parts (which constitute the vast majority of their [https://en.wikipedia.org/wiki/Heat_capacity thermal capacity]), not their skin, which may be at a very different temperature. Heat may be accumulated from external sources (e.g. re-entry or sunlight from Kerbol) or be generated by [[reaction engines]] or the cores of [[resource harvester]] drills or [[converter]]s, while they are active.
  
Core cooling (of drills and converters) is primarily limited by a radiator's "Core Heat xFer" (transfer) stat. This is always a small fraction of what the part can actually dissipate (under most circumstances), indicated by the "Max Cooling" figure.
+
=== Cooling Specifications ===
  
In the special case of the [[Convert-O-Tron 125]], its own stats are even more limiting, since its "Max cooling" cap of 50kW is below the cooling it would require (100kW) to avoid heating up beyond its optimal thermal efficiency. With the help of radiators, it will still reach equilibrium (albeit a little hotter than the optimal 1000k) since core heat production also scales down as the thermal efficiency drops off at higher temperatures.
+
All radiators:
 
+
* "Transfer Rate: 10%".
=== Cooling Specifications ===
+
* "Cools up to 4x part temp".
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 58: Line 58:
 
| style="text-align: right;" | 85 077
 
| style="text-align: right;" | 85 077
 
|}
 
|}
All radiators:
 
* "Transfer Rate: 10%".
 
* "Cools up to 4x part temp".
 
  
Thermal Control Systems:
+
Core cooling (of drills and converters) is primarily limited by a radiator's "Core Heat xFer" (transfer) stat. This is always a small fraction of what a radiator can actually dissipate, under most circumstances, indicated by the "Max Cooling" figure.
* "Tracking Speed: 0.1".
+
 
* "Rated for 2.5kPa dyn. pressure".
+
=== Core Cooling ===
 +
 
 +
To maintain an active drill or converter core at optimal thermal efficiency, there must be enough radiators with unused Core Heat Transfer capacity to fulfil the "Required Cooling" stat, shown below:
 +
 
 +
{| class="wikitable"
 +
! Image
 +
! Part
 +
! Required Cooling (kW)
 +
! Max Cooling(kW)
 +
|-
 +
| [[File:'Drill-O-Matic_Junior'_Mining_Excavator.png|center|22px]]
 +
| [['Drill-O-Matic Junior' Mining Excavator]]
 +
| '''50'''
 +
| 50
 +
|-
 +
| [[File:DrillOMatic.png|center|22px]]
 +
| [['Drill-O-Matic' Mining Excavator]]
 +
| '''100'''
 +
| 100
 +
|-
 +
| [[File:Convert-O-Tron_125.png|center|22px]]
 +
| [[Convert-O-Tron 125]]
 +
| 100
 +
| '''50'''*
 +
|-
 +
| [[File:ISRU_Converter.png|center|22px]]
 +
| [[Convert-O-Tron 250]]
 +
| '''200'''
 +
| 500
 +
|}
 +
 
 +
The [[Convert-O-Tron 125]] is a special case - it can not be maintained at optimal thermal efficiency because its "Max cooling" cap of 50kW (*) is below it's required cooling (100kW). With the help of radiators, it will still reach equilibrium, albeit a little hotter than the optimal 1000K. This is possible due to core heat production also scaling down as the thermal efficiency drops off (at higher temperatures).
  
 
== Changes ==
 
== Changes ==

Revision as of 01:53, 16 March 2017

The radiators are special devices that can cool other parts of a craft, consuming a small amount of electric charge when operating.

They dissipate heat into space (radiative) and atmosphere (convective). To do this efficiently, they make themselves hotter by transferring heat in, but they self-limit to avoid overheating to destruction. Their efficiency can be limited by ambient conditions, but for many uses it is constrained more by arbitrary functional caps. They are essential for maintaining resource harvester and converter cores at their optimal thermal efficiencies.

Variants

  • Rigid, fixed Panels, only cool the part they are attached to and parts directly connected to that part.
  • Deployable Thermal Control Systems (TCS), take heat from every part of the vessel (as if plumbed in with a cooling fluid loop). Like the deployable Solar Panels, these automatically rotate depending on the relative direction of Kerbol, but turn edge-on to minimise their exposure to the sun's radiation. While deployed, they will break off under 2.5kPa of dynamic pressure - moving too fast through a fairly thick atmosphere (e.g. ~67m/s at sea level on Kerbin, edge toward motion).
Image Part Radial size Cost
(Funds)
Mass
(t)
Max. Temp.
(K)
Tolerance
(m/s)
Tolerance
(g)
Deployable Electricity
(⚡/s)
RadiatorPanelEdge.png
Radiator Panel (edge) Radial mounted 450 0.03 2 500 12 50 No 0.025
(1.5 ⚡/min)
Radiator Panel (small).png
Radiator Panel (small) Radial mounted 150 0.01 2 500 12 50 No 0.025
(1.5 ⚡/min)
Radiator Panel (large).png
Radiator Panel (large) Radial mounted 450 0.05 2 500 12 50 No 0.025
(1.5 ⚡/min)
Thermal Control System (small).png
Thermal Control System (small) Radial mounted 450 0.05 2 500 12 50 Yes 0.025
(1.5 ⚡/min)
Thermal Control System (medium).png
Thermal Control System (medium) Radial mounted 2 250 0.25 2 500 12 50 Yes 0.125
(0.1 ⚡/sec)
Thermal Control System (large).png
Thermal Control System (large) Radial mounted 9 000 1.0 2 500 12 50 Yes 0.5
(0.5 ⚡/sec)

Operation

To begin functioning, "Activate Radiator" must be selected from a panel's right click interface, or "Extend/Retract Radiator" for the thermal control systems, which also deploys them. Alternatively these functions can be bound to action groups, with the "Toggle Panels" option allowing a single action group to start and stop many radiators simultaneously.

Function

Radiators only remove heat from the inside of parts (which constitute the vast majority of their thermal capacity), not their skin, which may be at a very different temperature. Heat may be accumulated from external sources (e.g. re-entry or sunlight from Kerbol) or be generated by reaction engines or the cores of resource harvester drills or converters, while they are active.

Cooling Specifications

All radiators:

  • "Transfer Rate: 10%".
  • "Cools up to 4x part temp".
Image Part Core Heat xFer (kW) Max Cooling (kW)
RadiatorPanelEdge.png
Radiator Panel (edge) 150 2 234
Radiator Panel (small).png
Radiator Panel (small) 50 1 048
Radiator Panel (large).png
Radiator Panel (large) 200 3 644
Thermal Control System (small).png
Thermal Control System (small) 50 3 139
Thermal Control System (medium).png
Thermal Control System (medium) 250 19 494
Thermal Control System (large).png
Thermal Control System (large) 1 000 85 077

Core cooling (of drills and converters) is primarily limited by a radiator's "Core Heat xFer" (transfer) stat. This is always a small fraction of what a radiator can actually dissipate, under most circumstances, indicated by the "Max Cooling" figure.

Core Cooling

To maintain an active drill or converter core at optimal thermal efficiency, there must be enough radiators with unused Core Heat Transfer capacity to fulfil the "Required Cooling" stat, shown below:

Image Part Required Cooling (kW) Max Cooling(kW)
'Drill-O-Matic Junior' Mining Excavator.png
'Drill-O-Matic Junior' Mining Excavator 50 50
DrillOMatic.png
'Drill-O-Matic' Mining Excavator 100 100
Convert-O-Tron 125.png
Convert-O-Tron 125 100 50*
ISRU Converter.png
Convert-O-Tron 250 200 500

The Convert-O-Tron 125 is a special case - it can not be maintained at optimal thermal efficiency because its "Max cooling" cap of 50kW (*) is below it's required cooling (100kW). With the help of radiators, it will still reach equilibrium, albeit a little hotter than the optimal 1000K. This is possible due to core heat production also scaling down as the thermal efficiency drops off (at higher temperatures).

Changes

1.1
  • "Fixed" radiators now also need to be activated before they start working.