Difference between revisions of "Module"

Latest revision as of 05:48, 5 July 2021

STOCK MODULES

Modules define what specific parts can do. They are generally calls to C-coded or hard-coded functions that define what functionality these parts have in-game. If you are a new part designer, modder, engineer, or someone else who makes parts, please check the STOCK modules list before designing a new module. Each additional module increases the CPU workload and reduces FPS and Physics. All 0.90 stock modules are now included.

name	names define the module in use and are a general indication of what the module subtype does. Specific variables are associated with each [module].[name]. For example, the Clamp-O-Tron Docking Port Sr. has the MODULE.name ModuleDockingNode and its' associates variables are [referenceAttachNode] and [nodeType]. Some [MODULE]s share variables with other modules, which can make deciphering their purpose difficult.

explanation

code examples

CModuleFuelLine

No known arguments or variables at this time. This module is used by fuelLine, presumably to specify that it is fuel Transfer enabled. More research is clearly called for. This module is new in 0.90.

MODULE
{
 name = CModuleFuelLine
}

CModuleLinkedMesh

This module is new in 0.90 and is used by fuelLine and strutConnector, presumably to created the variable length connectors between two parts (and add end caps on both sides).

variable	example	definition
lineObjName	obj_line obj_strut	specifies whether there is a flag displayed on the exterior surface of the object.
targetAnchorName	obj_targetAnchor	Unknown
anchorCapName	obj_AnchorCap	name of the part on the source part that this part attaches from
targetCapName	obj_targetCap	name of the part on the target part to which this mesh attaches

MODULE
{
 name = CModuleLinkedMesh
 
 lineObjName = obj_line
    targetAnchorName = obj_targetAnchor
    anchorCapName = obj_anchorCap
    targetCapName = obj_targetCap 
}

CModuleStrut

This module is new in 0.90 and is used by strutConnector, presumably to indicate that it is a structural support part.

variable	example	definition
linearStrength	100 150	the push/pull strength of the strut
angularStrength	100 150	the sheering strength of the strut

MODULE
{
 name = CModuleStrut
 
 linearStrength = 150
 angularStrength = 150
}

FlagDecal

Parts with this module have a place for a flag on their sides. You don't have to turn it on, but this is how it gets there.

variable	example	definition
textureQuadName	flagTransform	specifies whether there is a flag displayed on the exterior surface of the object.

MODULE
{
      name = FlagDecal
      textureQuadName = flagTransform
}

FXModuleAnimateThrottle

Animation for engines and engine bells showing them as they fire up and operate, based on the amount of throttle applied. See ion Engines for a good example.

variable	example	definition
animationName	colorAnimation	specifies the animation to be used
depondOnEngineState	True False	specifies whether the animation is dependent on the throttle
responseSpeed	0.5	specifies the rate at which the animation reacts to the change in engine state

MODULE
{
      name = FXModuleAnimateThrottle
      animationName = colorAnimation
      dependOnEngineState = True
      responseSpeed = 0.5
}

FXModuleConstrainPosition

Copies the rotation and/or position (matchRotation/matchPosition) from targetName to moversName. Used by for example wheels to copy the rotation of the steering part to the wheel collider.

variable	example	definition
matchRotation	true false	Should targetNames rotation be applied to moversName?
matchPosition	true false	Should targetName's position be applied to moversName?
CONSTRAINFX	{}	unknown
targetName	Steering steering	gameObject to copy targetName's world position/rotation of.
moversName	wheelCollider steering	gameObject to apply targetName's world position/rotation to.

MODULE
{
	name = FXModuleConstrainPosition
	matchRotation = true
	matchPosition = false
	CONSTRAINFX
	{
		targetName = steering
		moversName = lateral
	}
}

FXModuleLookAtConstraint

Makes two gameObject "look" at each other, for example in suspensions where the piston must "look" at the cylinder. The gameObjects must be aligned so it rotates around it's local X axis and looks down it's local Z axis.

variable	example	definition
CONSTRAINLOOKFX	{}
targetName	susp2-1	gameObject to target rotatorsName at.
rotatorsName	susp2-2	gameObject to rotate so that it looks at targetName

MODULE
{
 name = FXModuleLookAtConstraint
 CONSTRAINLOOKFX
 {
  targetName = susp2-1
  rotatorsName = susp2-2
 }
 CONSTRAINLOOKFX
 {
  targetName = susp2-2
  rotatorsName = susp2-1
 }
 CONSTRAINLOOKFX
 {
  targetName = susp1-2
  rotatorsName = susp1-1
 }
 CONSTRAINLOOKFX
 {
  targetName = susp1-1
  rotatorsName = susp1-2
 }
}

KerbalSeat

This module makes the part have an EXTERIOR seat.

variable	example	definition
seatPivotName	seatPivot	Unknown
ejectDirection	0, 1, 0.2	specifies the direction from which your Kerbal will exit the vehicle. Try to line up with a hatch!

MODULE
{
 name = KerbalSeat
 seatPivotName = seatPivot  
 ejectDirection = 0, 1, 0.2
}

LaunchClamp

This module enables the part to hold a vessel in suspension on the launch pad.

variable	example	definition
trf_towerPivot_name	obj_girdercap	specifies the model used for the pivot point
trf_towerStretch_name	obj_girder	specifies the model for the ground to pivot girder
trf_anchor_name	obj_ground	specifies the model for the ground mount point
trf_animationRoot_name	launchclamp	specifies the base animation
anim_decouple_name	launchclamp	specifies the animation for the release of the clamp

MODULE
{
    name = LaunchClamp
 
 trf_towerPivot_name = obj_girdercap
 trf_towerStretch_name = obj_girder
 trf_anchor_name = obj_ground
 
 trf_animationRoot_name = launchclamp
 anim_decouple_name = launchclamp
}

ModuleAlternator

Specifies that this part produced a resource, based on the percentage of thrust produced by the engine.

variable

example

RESOURCE

variable	example	definition
name	ElectricCharge	name of the resource produced
rate	1.0	rate at which the resource is produced at 100% thrust, expressed in units/second

MODULE
{
 name = ModuleAlternator 
 RESOURCE
 {
  name = ElectricCharge
  rate = 5.0
 }
}

ModuleAnchoredDecoupler

This module specifies that the part is attached (anchored) to another part, and will decouple from yet a third part, forcing the third part away from it.

variable	example	definition
anchorName	anchor	specifies the name of the anchored part
ejectionForce	450	dV applied to part upon separation
explosiveNodeID	srf top	specifies the location of the explosion.

MODULE
{
    name = ModuleAnchoredDecoupler
    anchorName = anchor
    ejectionForce = 450
 explosiveNodeID = srf
}

ModuleAnimateGeneric

Generic Animations will be applied to parts with this module. This module is slowly replacing other animation modules as progression is made towards the release version of KSP.

variable	example	definition
animationName	Deploy CrewCabinLight dish dockingring dockingporthull	specifies the name of the animation to be used
isOneShot	false	specifies whether the animation can occur only once
startEventGUIName	Flavor text	to describe turning the animation to its 'On' State
endEventGUIName	Flavor text	to describe turning the animation to its 'Off' State
actionGUIName	Flavor text	to describe switching the animation between it's 'on' and 'off' states
allowManualControl	true false	specifies whether the part can be manually animated
actionAvailable	true false	???
eventAvailableEditor	true false	specifies whether the animation can be toggled in the VAB/SPH scene
eventAvailableFlight	true false	specifies whether the animation can be toggled in the flight scene
eventAvailableEVA	true false	specifies whether the animation can be toggled by a Kerbal on EVA near the vessel or part containing the animation
evaDistance	5 10	specifies the maximum distance (in meters) from which a Kerbal on EVA can toggle an animation on the part

MODULE
{
   name = ModuleAnimateGeneric
   animationName = dish
   isOneShot = false
   
 startEventGUIName = Extend
 endEventGUIName = Retract
 actionGUIName = Toggle Antenna
}

ModuleAnimateHeat

This module specifies that heating animation will be applied to this part.

variable	example	definition
ThermalAnim	HeatAnimationEmissiveLiquidEngine3 HeatAnimationEmissiveTurbofan HeatAnimationEmissiveJet overheat	animation for applying heat to an object

MODULE
{
      name = ModuleAnimateHeat
      ThermalAnim = HeatAnimatioEmissiveLiquidEngine3
}

ModuleAsteroid

Because it has no procedures or calls, is new in [0.90] and only appears on a part that you must hack to have available, it is impossible to say for certain what this module does, but it has something to do with being an asteroid. no procedures or calls

MODULE
{
 name = ModuleAsteroid 
}

ModuleCargoBay

Allows a cargo bay to shield its contents from airflow and heat.

variable	example	definition
DeployModuleIndex	0 1 2	Specifies the index (starting with zero) of the MODULE which controls whether the bay is open or closed. Said MODULE must implement IScalarModule (e.g. ModuleAnimateGeneric and its descendents, or ModuleAnimatedDecoupler from AnimatedDecouplers).
closedPosition	0 1	Specifies whether the cargo bay is closed by default (0) or open by default (1).
lookupRadius	1.25	Radius within which the part should search for parts to be shielded.
lookupCenter	0,0.5,0 1,0,0	Optional (default is 0,0,0). Specifies the point from which the search is centered. Rays are cast from here; any parts that are struck are shielded, while the rays stop when the part's own colliders are hit.
nodeOuterForeID nodeOuterAftID nodeInnerForeID nodeInnerAftID	top bottom top2 bottom2	Optional. For hollow cargo bay parts without end walls (e.g. Mk2 Cargo Bay CRG-04), node IDs are given to determine where the cargo bay ends.

MODULE
{
    name = ModuleCargoBay
    DeployModuleIndex = 1
    closedPosition = 1
    lookupRadius = 1

    nodeOuterForeID = top
    nodeOuterAftID = bottom
    nodeInnerForeID = top2
    nodeInnerAftID = bottom2
}

ModuleCommand

Applies Command to vessels

variable

example

definition

minimumCrew

0
1
2

Specifies the minimum number of crew needed to operate this module.

RESOURCE

name	ElectricCharge	This is the name of that resource
rate	15.0	and the rate in units/second of resource consumed

If this Module requires a resource

MODULE
{
 name = ModuleCommand
 minimumCrew = 1
}

ModuleControlSurface

This module gives the part the ability to respond to inputs, generally used for aerodynamic parts to expose more or less effective surface to lift and braking forces in atmospheres.

variable	example	definition
dragCoeff	* 0.5	this value overrides the maximum_drag value
deflectionLiftCoeff	* 0.7	specifies the Coefficient of lift for the part
ctrlSurfaceRange	* 20	specifies the degrees of operation for the part
ctrlSurfaceArea	* 0.95	specifies how much of the part affects lift

MODULE
{
 name = ModuleControlSurface
 dragCoeff = 0.5
 deflectionLiftCoeff = 0.7
 ctrlSurfaceRange = 20
 ctrlSurfaceArea = 0.95
}

ModuleDataTransmitter

This module specifies that the part acts as a transmitter of data, typically an antenna of some sort, for broadcasting science data back to the KSC.

variable	example	definition
antennaType	DIRECT RELAY	whether the antenna is capable of acting as a relay
packetInterval	0.18 0.4 0.3	Mits per second
packetSize	2	Mits per packet
packetResourceCost	20 10 12.5	Resource per packet
requiredResource	ElectricCharge	Required resource (usually ElectricCharge)
DeployFxModules	0	Deployment
ProgressFxModules	1	Animations that play while transmitting

MODULE
{
 name = ModuleDataTransmitter

 antennaType = DIRECT
 packetInterval = 0.18
 packetSize = 2
 
 packetResourceCost = 20.0
 requiredResource = ElectricCharge
  
 DeployFxModules = 0
}

ModuleDecouple

ModuleDecouple is a slightly upgraded version of ModuleAnchoredDecoupler, and may replace it in the future. Allows for decouplers that separate from both parts to which it is attached.

variable	sample	definition
isOmniDecoupler	true false	Specifies whether this decoupler separates on both ends or not. Defaults to false.
ejectionForce	100	specifies the DeltaV with which the part separates
explosiveNodeID	top srf	for non-OmniDecouplers, specifics the Node of separation

MODULE
{
 name = ModuleDecouple
 ejectionForce = 250
 explosiveNodeID = srf
}

ModuleDeployableSolarPanel

Solar panels cannot deploy without this module. May be possible to use for other modules which unfold. Optionally specifies whether the part will automatically turn to face the sun. This is one place where you can say how a part breaks.

variable	example	definition
animationName	solarpanels solarpanels2 solarpanels4 altsolarpanelbase bigsolarpanel	unknown for sure. Assumed to refer to an animation describing part transformation from its closed state to its open state. known parameters are:
sunTracking	true false	Indicates whether the animation will turn the panel towards the sun.
raycastTransformName	suncatcher	Specifies the GameObject in Unity with Z+ forward facing the sun that will act as the solar panel.
pivotName	suncatcher	Specifies the object in Unity which will act as the rotation point for the solar panel sun tracking function.
isBreakable	true false	Indicates whether the part will break on high-dynamic stress.
resourceName	ElectricCharge	The resource provided by this module. Any resource may be used, including resources not defined.
chargeRate	10	Amount of resource provided per second at 100% output. Positive values only, please.
powerCurve		powerCurve is a special call consisting of subtypes called [key]. Each [key] uses four numbers to define what it will do at a specific distance from a source. In the case of solar panels, where powerCurve is typically used, there are typically 4 [key]s. [powerCurve] defines the rate at which resources are provided relative to the [chargeRate] and distance from the specified source (ie. Kerbol) 206000000000 0.00 0 0 013599840256 1.00 0 0 068773560320 0.50 0 0 000000000000 10.0 0 0

MODULE
{
 name = ModuleDeployableSolarPanel
 
 animationName = solarpanels2
 resourceName = ElectricCharge
 chargeRate = 2
 powerCurve
  {
  key = 206000000000 0 0 0
  key = 13599840256 1 0 0
  key = 68773560320 0.5 0 0
  key = 0 10 0 0
  }
}

ModuleDockingNode

A module for docking ports

variable	example	definition
referenceAttachNode	top bottom dockingNode	Specifies the node on the part that is used for the docking port, generally top or bottom. dockingNode is the name of the GameObject transform in Unity with Z+ forward.
deployAnimationController	1 0	Boolean
nodeType	size1 size2 size0	Specifies the type of node for attachment. When perform docking operations, nodes must have the same value for nodeType in order to dock with one another.
nodeTransformName	dockingNode DOCKING	unknown
controlTransformName	controlNode	apparently only used for docking nodes that have related animations, see dockingPortInline
undockEjectionForce	0.25	Force in d/v applied on undock
minDistanceToReEngage	3.5	Docking Nodes must separate by this many meters before being able to reengage
acquireForce	3.5	magnetic grip, in d/v
acquireTorque	3.5	rotational magnetic grip, in d/v
acquireRange	3	maximum distance to begin applying magnetic grip
captureRange	1.5	maximum range to begin docking
snapRotation	True False	specifies whether to enforce docking at multiple rotational offsets rather than a single allowable angle
snapOffset	45 90 120	specifies what rotational offsets (in degrees) docking is allowed
acquireMinRollDot	0.95 0.99999	specifies the minimum angular accuracy between docking ports for applying magnetic grip; higher values imply better accuracy
captureMinRollDot	0.95 0.99999	specifies the minimum angular accuracy between docking ports to begin docking; higher values imply better accuracy
gendered	True False	specifies whether to enforce gendered docking; defaults to false (androgynous)
genderFemale	True False	if gendered (see above) is true, this specifies whether the docking port can only docking with another port of the same type but different gender; defaults to true, which means it can only dock with another port with genderFemale=false

MODULE
{
 name = ModuleDockingNode
 referenceAttachNode = top
 nodeType = size2
 undockEjectionForce = 0.25
 minDistanceToReEngage = 3.5
 acquireForce = 3.5
 acquireTorque = 3.5
 acquireRange = 3.0
 captureRange = 1.5
 snapRotation = false
}

ModuleEngines

Everything about your engine, all in one module!

variable	example	definition
thrustVectorTransformName	thrustTransform	specifies gameObject to be used as point of applied thrust, force is applied in local +Z. standard name is thrustTransform, but it can be anything as long as gameObject in the MU matches thrustVectorTransformName value in module config
throttleLocked	True False	Used to create engines without controllable thrust.
exhaustDamage	True False	assumed to indicate whether the exhaust from this engine will damage other parts.
ignitionThreshold	0.1	minimum required resource(s) for engine to start. If engine has less than specified value in resource(s), it will not start. Think of it as if your car needs at least half full tank to start.
minThrust	0 10 100	Minimum thrust value. Engines will be considered 'off' at or below this value.
maxThrust	200 215 80	Just like the name implies, this is the maximum thrust a single unit of this module can produce. In order to create a more powerful engine, set this value higher.
heatProduction	400 900	a measure of the amount of heat energy produced per second. measured in degrees Kerbius (degrees Celsius)
fxOffset	0,0,0 0,0,1	3-dimensional vector coordinates specifying the location of thrust effects
useEngineResponseTime	True False
engineAccelerationSpeed	0.2 0.12
engineDecelerationSpeed	0.35 0.21
allowShutdown	True False	Specifies engines that cannot be turned off, regardless of whether their thrust can be controlled.
useVelocityCurve	True False
PROPELLANT	{}	resource utilized in the operation of this part, generally a fuel or other propellant. Engines may use multiple propellant types.
name	LiquidFuel Oxidizer	name of the resource consumed while this part is in operation
ratio	0.9 1.1	rate at which this resource is consumed, per second. Not to be confused with ratio relative to other propellants.
DrawGauge	true false	Boolean value that indicates whether or not the 'fuel remaining' indicator in the staging selection is displayed or not.
atmosphereCurve	{}	specifies variances in operational efficiency
key		uses two values to specify engine efficiency relative to the depth of the atmosphere (based on Kerbin sea-level!) First number indicates the relative pressure (0 = vacuum, 1 Kerbin sea-level), second numer indicates ISP value). Translates directly to ISP. In order to make a more efficient engine, set the second number of this array higher.
velocityCurve	{}	Control the degree of acceleration of an engine at specified speeds. It uses keys to generate a curve of the amount of thrust generated by the engine according to the speed of the craft. First part of the key is speed in m/s and then comes the thrust multiplier ( the effective thrust will be : maxThrust * multiplier). Used stock by jet engines.

MODULE
{	
name = ModuleEngines	
thrustVectorTransform
Name = thrustTransform	
throttleLocked = True	
exhaustDamage = True	
allowShutdown = False	
ignitionThreshold = 0.1	
minThrust = 0	
maxThrust = 18	
heatProduction = 550	
fxOffset = 0, 0, 0.02	
PROPELLANT	
{		
name = SolidFuel        
ratio = 1.0		
DrawGauge = True	
}	
atmosphereCurve 	
{   	 
key = 0 100  	 
key = 1 100 	
}	
}

ModuleEnginesFX

An updated and more customizable version of ModuleEngines. Required for and allows implementation of multi-modal engines and engines with custom exhaust FX.

variable	example	definition
engineID	LES KS25	Hidden name of the engine
runningEffectName	running_closed	effect used for when the engine is running
thrustVectorTransformName	thrustTransform obj_gimbal	specifies gameObject to be used as point of applied thrust, force is applied in local +Z. standard name is thrustTransform, but it can be anything as long as gameObject in the MU matches thrustVectorTransformName value in module config
exhaustDamage	True False	Indicates whether the exhaust from this engine will damage other parts.
throttleLocked	True False	Assumed to specify that solid Rocket Boosters cannot have their throttle adjusted while in flight.
ignitionThreshold	0.1 0.05	minimum required resource(s) for engine to start. If engine has less than specified value in resource(s), it will not start. Think of it as if your car needs at least half full tank to start.
minThrust	0 10	Minimum thrust value. Engines will be considered 'off' at or below this value.
maxThrust	200 215	Just like the name implies, this is the maximum thrust a single unit of this module can produce.
heatProduction	400 600	a measure of the amount of heat energy produced per second. measured in degrees Kerbius (degrees Celsius)
fxOffset	0,0,-1 0,0,-0.5	3-dimensional vector coordinates specifying the location of thrust effects
PROPELLANT	{}	resource utilized in the operation of this part, generally a fuel or other propellant.
name	LiquidFuel Oxidizer XenonGas	name of the resource consumed while this part is in operation
ratio	0.9 1.1	rate at which this resource is consumed, per second. Not to be confused with ratio relative to other propellants.
DrawGauge	True False	Boolean value that indicates whether or not the 'fuel remaining' indicator in the staging selection is displayed or not.
atmosphereCurve	{}	specifies variances in operational efficiency
key	0 360 0.5 320 1 260	uses two values to specify engine efficiency relative to the depth of the atmosphere (based on Kerbin sea-level!) First number indicates the relative pressure (0 = vacuum, 1 Kerbin sea-level), second numer indicates ISP value).

MODULE
{
 name = ModuleEnginesFX
 thrustVectorTransformName = thrustTransform
 exhaustDamage = True
 ignitionThreshold = 0.1
 minThrust = 0
 maxThrust = 30
 heatProduction = 150
 fxOffset = 0, 0, 0.125
 PROPELLANT
 {
   name = LiquidFuel
  ratio = 0.9
  DrawGauge = True
 }
 PROPELLANT
 {
  name = Oxidizer
  ratio = 1.1
 }
 atmosphereCurve
  {
  key = 0 350
  key = 1 300
  }
}

ModuleEnviroSensor

Environmental sensor definitions. Specifies that this part is one of these types of sensors.

variable	example	definition
sensorType	ACC PRES GRAV TEMP	Type of experiment / sensor. Not sure of the utility of this definition, could be used in Science modules to determine what type of experiment was conducted. Could be used in contracts for determining contract requirements.

MODULE
{
 name = ModuleEnviroSensor
 sensorType = ACC
}

ModuleGenerator

Generators and Alternators serve must the same purpose, but generators are not linked to the percentage of thrust output of an engine, they simply produce. Some cannot be shut off. A generator may produce any available resource.

variable	example	definition
isAlwaysActive	true false	specifies whether this module is always active or not. true/false
OUTPUT_RESOURCE	{}
name	ElectricCharge LiquidFuel XenonGas	specifies the name of the produced resource.
rate	1 5	specifies the rate of resource produced, expressed in units per second.

MODULE
{
 name = ModuleGenerator
 isAlwaysActive = true
 OUTPUT_RESOURCE
 {
    name = ElectricCharge
    rate = 0.75
 } 
}

ModuleGimbal

Gimballing represents an engine-bells ability to move around in relation to the engine body, provided a degree of ability to steer the vessel. Higher numbers indicate a higher range, but don't set it too high. Strange things will happen. Recommend limiting range to .90 at the absolute maximum.

variable	example	definition
gimbalTransformName	thrustTransform	Uncertain.
gimbalRange	.20 .15 .10 .5	represents the maximum angle, in degrees, that gimballing is supported. Recommend keeping this number relatively low (under 20 for sure), as setting the number too high can have catastrophic effects on ship design.

MODULE
{
 name = ModuleGimbal
 gimbalTransformName = thrustTransform
 gimbalRange = 0.5
}

ModuleGrappleNode

Added in [0.90], specifically for the KASA asteroid capture missions, this part functions much like a dockingNode, however, it does not require a matching docking node on the capture-side. Grapplers can attach to anything (as far as we know).

variable	sample	definition
nodeTransformName	ArticulatedCap	Uncertain. Assumed to relate to animations used.
deployAnimationController	1	Uncertain.
nodeType	size1	Size of the connection. Relates to Docking port sizes.
captureRange	0.05	Maximum distance between grappler and target at which grappling can occur
captureMinFwdDot	0.866	Unknown
captureMaxRvel	1	Maximum speed, relative to target, at which target can be grappled

MODULE
{
 name = ModuleGrappleNode
 
 nodeTransformName = ArticulatedCap
 deployAnimationController = 1 
 nodeType = size1
 
 captureRange = 0.05 
 captureMinFwdDot = 0.866
 captureMaxRvel = 1
}

ModuleJettison

specifies that pieces of this craft are able to be jettisoned, what they are and how to jettison them

variable	example	definition
jettisonName	node_fairing_collider fairingL fairingR fairing	Name of the part to be jettisoned
bottomNodeName	bottom	Name of the node from which the part will be jettisoned
isFairing	True False	Specifies whether the ejected part is a fairing. Uncertain as to why this important. May have to do with debris tracking.
jettisonedObjectMass	0.1	Specifies the mass of the jettisoned object. It is uncertain, yet, if this mass is removed from the total mass of the vehicle. It is also uncertain if, when a fairing is added in vehicle assembly, this mass is added to the parent object.
jettisonForce	1 2 5	DeltaV with which the object is jettisoned from its parent object. Typically very low values, such as 1, 2 or 5
jettisonDirection	0 0 1 0 1 0	Three-dimensional array which specifies the direction of the jettisonForce relative to the original part, laterally is 0 0 1 and 0 0 -1, for example.

MODULE
{
       name = ModuleJettison
       jettisonName = fairing
       bottomNodeName = bottom
       isFairing = True
       jettisonedObjectMass = 0.1
       jettisonForce = 5
       jettisonDirection = 0 0 1
 
}

ModuleLandingGear

Specifies that the part is a landing gear, implying a wheel, and the traits of that wheel. Hopefully being deprecated in favor of moduleWheel below.

variable	example	definition
BrakeTorque	12	Amount of torque applied during breaking
BrakeSpeed	3	Reduction in speed over time, expressed in m/s

MODULE
{
 name = ModuleLandingGear
 
 BrakeTorque = 12
 BrakeSpeed = 3
}

ModuleLandingLeg

Specifies that this part is a landing leg and describes compression and resistance factors for the part.

variable	example	definition
animationName	Deploy newlandingleg probeleg	specifies the animation to use
wheelColliderName	wheelCollider
suspensionTransformName	Piston piston leg
orientFootToGround	true false
landingFootName	foot
alignFootUp	true false	Aligns to up Axis instead of forward axis if true
suspensionUpperLimit	0.60 0.47 0.65	unknown
impactTolerance	300 450 150	specifies the dV in m/s before the part breaks
suspensionSpring	1.25 5 1	specifies the maximum degree of compression in the part
suspensionDamper	1 2	Uncertain
suspensionOffset	0 0.02	Uncertain

MODULE
{
 
 name = ModuleLandingLeg
 animationName = Deploy
 wheelColliderName = wheelCollider
 suspensionTransformName = Piston
 orientFootToGround = true
 landingFootName = foot
 // Foot is aligned to up Axis instead of forward
 alignFootUp = true
 suspensionUpperLimit = 0.60
 impactTolerance = 300
 suspensionSpring = 1.25
 suspensionDamper = 1
 suspensionOffset = 0, 0.02,0
}

ModuleLight

Specifies that this part is a light source, and how that light is produced and directed.

variable	example	definition
lightName	spotlight landinglight	Name of the light source
useAnimationDim	true false	Uncertain. Assumed to specify an animation to dim the light
lightBrightenSpeed	2.5	When you turn it off, how long it takes to turn off
lightDimSpeed	2.5	Speed at which the light dims
resourceAmount	0.4	rate of consumption (in units/second) of the needed resource
animationName	LightAnimation
useResources	true false	specifies whether this light source requires resources
useAutoDim	true false	Sets the autodim

MODULE
{
 name = ModuleLight
        lightName = spotlight
 useAnimationDim = true
 lightBrightenSpeed = 2.5
 lightDimSpeed = 2.5
 animationName = LightAnimation
 resourceAmount = 0.02
 useResources = true
}

ModuleParachute

specifies that this part is a parachute and describes the operational parameters for parachute operations. Includes default settings for opening height and deployment atmospheric conditions.

variable	example	definition
semiDeployedAnimation	semiDeploySmall	specifies the animation to use in the semi-deployed state
fullyDeployedAnimation	fullyDeploySmall	specifies the animation to use in the fully deployed state
invertCanopy	true false	unknown purpose.
autoCutSpeed	0.5	specifies the speed at which the parachute will be automatically cut, rendering it ineffective.
capName	cap
canopyName	canopy
stowedDrag	0.22	specifies the drag effect while the parachute is still stowed
semiDeployedDrag	1	specifies the drag effect while the parachute is in its semi-deployed state
fullyDeployedDrag	500	specifies the drag effect while the parachute is in its fully deployed state
minAirPressureToOpen	0.01	specifies the minimum Air pressure (or atmosphere) required for the parachute to enter its semi-deployed state
deployAltitude	500	configurable, sets the altitude above the planetary collision mesh at which the parachute will enter its fully deployed state
deploymentSpeed	1	specifies the speed at which the parachute will enter its fully deployed state
semiDeploymentSpeed	1	specifies the speed at which the parachute will enter its semi-deployed state

MODULE
{
 name = ModuleParachute
 semiDeployedAnimation = semiDeploySmall
 fullyDeployedAnimation = fullyDeploySmall
 invertCanopy = true
 autoCutSpeed = 0.5
 capName = cap
 canopyName = canopy
 stowedDrag = 0.22
 semiDeployedDrag = 1
 fullyDeployedDrag = 500
 minAirPressureToOpen = 0.01
 deployAltitude = 500
 deploymentSpeed = 1
 semiDeploymentSpeed = 1 
}

ModuleRCS

Specifies that this is a Reaction Control System part. Uses variable resources to control directionality of the spacecraft. Unlike engines, RCS parts are generally oriented perpendicular to all directions of a spacecraft in order to provide steering, rather than thrust. Typically, monopropellant is decompressively expelled from an RCS port to push the spacecraft in one direction. Note: ModuleRCS can use either a single resource, or a series of PROPELLANT calls.

variable	example	definition
thrusterTransformName	RCSthruster
thrusterPower	10 5 20	This is the power that the RCS thrusters provide. To make stronger RCS, use a higher numer
resourceName -------- interchangeable with PROPELLANT calls		The name of the resource used by the RCS thruster, typically MonoPropellant
resourceFlowMode -- for resourceName only --	STAGE_PRIORITY_FLOW STACK_PRIORITY_FLOW ALL_VESSEL NONE	Specifies the manner in which the resource is requested from the vessel
PROPELLANT		Introduced with the inclusion of the Vernor RCS, it is recommended to use PROPELLANT calls only when using multiple resources. It is expected that older RCS will be updated to the new convention prior to final release.
name	MonoPropellant LiquidFuel Oxidizer	name of the resource consumed
ratio	1 1.1 0.9	ratio of the resource consumed
resourceFlowMode	STAGE_PRIORITY_FLOW STACK_PRIORITY_FLOW ALL_VESSEL NONE	using the same pull method as a single resource, specifies how to pull the resource from the rest of the vessel
atmosphereCurve	0 350 1 250	Specifies the efficiency of the RCS thruster using 2-part keys 0 specifies the ISP in atmosphere 1 specifies the ISP at Kerbin Sea Level entries in between specify the ISP at specific percentages of Kerbin Sea Level (e.g: 0.5 = 1/2 Kerbin Atmosphere)

MODULE
{
 name = ModuleRCS
 thrusterTransformName = RCSthruster
 thrusterPower = 12
 resourceName = LiquidFuel
 resourceFlowMode = STAGE_PRIORITY_FLOW
 PROPELLANT
 {
  name = LiquidFuel
        ratio = 0.9
  DrawGauge = True
  resourceFlowMode = STAGE_PRIORITY_FLOW
 }
 PROPELLANT
 {
  name = Oxidizer
  ratio = 1.1
  resourceFlowMode = STAGE_PRIORITY_FLOW
 }
 atmosphereCurve
  {
     key = 0 260
    key = 1 140
  }
}

ModuleReactionWheel

Specifies that this part contains reaction wheels, used to stabilize the directionality of a spacecraft. Typically used for stability, rather than producing change, both are possible. If you're thinking that this does the same thing as RCS, you wouldn't be far off.

variable	example	definition
PitchTorque	20	numerical value, denotes amount of change can be applied to pitch using reaction wheel power
YawTorque	20	numerical value, denotes amount of change can be applied to yaw using reaction wheel power
RollTorque	20	numerical value, denotes amount of change can be applied to roll using reaction wheel power
RESOURCE	{}	The resource used by reaction wheels in order to affect the changes they can produce
name	ElectricCharge	name of the relevant resource, typically ElectricCharge
rate	0.45	Rate of consumption, expressed in units/second at full usage.

MODULE
{
 name = ModuleReactionWheel
 
 PitchTorque = 30
 YawTorque = 30
 RollTorque = 30
 
 RESOURCE
 {
  name = ElectricCharge
  rate = 0.6
 }
}

ModuleResourceConverter

Used to create a part that convertes resources.

variable	example	definition
ConverterName	Lf+Ox	Name displayed when right-clicking the part.
StartActionName	Start ISRU [Lf+Ox]	Text displayed for the start action.
StopActionName	Stop ISRU [Lf+Ox]	Text displayed for the stop action.
AutoShutdown	true false	Automatically shut the converter down if part is overheating?
TemperatureModifier	Temperature modifier defintion	Unknown. Floatpoint curve.
GeneratesHeat	true false	If set to true the converter operation will generate heat.
DefaultShutoffTemp	.8	Unknown. Related to AutoShutdown. Assumed to be unrelated to Core Temp.
ThermalEfficiency	Thermal efficiency definition	Efficiency related to part temperature. Floatpoint curve.
UseSpecialistBonus	true false	If set to true the converter will use specialist bonus. Efficiency = EB * [SBB + (SEF * EE)]. EE = 0-6
SpecialistEfficiencyFactor	0.2	SEF. Sets the amount each specialist-level adds to the efficiency.
SpecialistBonusBase	0.05	SBB. Base efficiency a converter can reach without any specialist if EB = 1.
ExperienceEffect	ConverterSkill	EE. NoSpecialist=0; ZeroStarSpecialist=1; OneStarSpecialist=2; FiveStarSpecialist=6
EfficiencyBonus	1	EB. Final multiplier for efficiency. Tipp: start with EB = 1 and adjust if required.
INPUT_RESOURCE	Resource defintion	Defines the resource consumed when the converter is active. Can have multiple INPUT_RESOURCE definitions.
OUTPUT_RESOURCE	Resource defintion	Defines the resource produced when the converter is active. Can have multiple OUTPUT_RESOURCE definitions.

MODULE
{
 name = ModuleResourceConverter
 ConverterName = Lf+Ox
 StartActionName = Start ISRU [Lf+Ox]
 StopActionName = Stop ISRU [Lf+Ox]	 
 AutoShutdown = true
 TemperatureModifier
 {
 	key = 0 100000
 	key = 750 50000
 	key = 1000 10000
 	key = 1250 500	
 	key = 2000 50	
 	key = 4000 0
 }				
 GeneratesHeat = true
 DefaultShutoffTemp = .8
 ThermalEfficiency 
 {
 	key = 0 0 0 0
 	key = 500 0.1 0 0
 	key = 1000 1.0 0 0
 	key = 1250 0.1 0 0
 	key = 3000 0 0 0 
 }
 UseSpecialistBonus = true
 SpecialistEfficiencyFactor = 0.2
 SpecialistBonusBase = 0.05
 ExperienceEffect = ConverterSkill
 EfficiencyBonus = 1
 INPUT_RESOURCE
 {
 	ResourceName = Ore
 	Ratio = 0.5
 	FlowMode = STAGE_PRIORITY_FLOW
 }
 INPUT_RESOURCE
 {
 	ResourceName = ElectricCharge
 	Ratio = 30
 }
 OUTPUT_RESOURCE
 {
 	ResourceName = LiquidFuel
 	Ratio = 0.45
 	DumpExcess = false
 	FlowMode = STAGE_PRIORITY_FLOW
 }
 OUTPUT_RESOURCE
 {
 	ResourceName = Oxidizer
 	Ratio = 0.55
 	DumpExcess = false
 	FlowMode = STAGE_PRIORITY_FLOW
 }
}

ModuleResourceHarvester

Used to create a part that harvestes resources from the environment.

variable	example	definition
HarvesterType	0 1 2 3	Defines the type of harvester. 0 = Planetary use 1 = Oceanic use 2 = Atmospheric use 3 = Vacuum use? Harvester types other then 0 require use of a deploy animation before they can be activated (tested with KSP version 1.1.3).
Efficiency	1	Harvester efficiency. Seems to work differently depending on harvester type.
ResourceName	Ore	Resource to harvest.
ConverterName	Surface Harvester	Name displayed when right-clicking the part.
StartActionName	Start Surface Harvester	Text displayed for the start action.
StopActionName	Stop Surface Harvester	Text displayed for the stop action.
ToggleActionName	Toggle Surface Harvester	Text displayed for the toggle action.
ImpactTransform	ImpactTransform	Seems to be only relevant for surface harvesters. Resource is only harvested when in contact to the ground. Further details of this parameter are unknown.
ImpactRange	5	Seems to be only relevant for surface harvesters. May be the distance between where the drillhead is when it is deployed and where the actual part is. Further details of this parameter are unknown.
AutoShutdown	true false	If set to true the harvester will automatically shut off if it overheats.
GeneratesHeat	true false	If set to true the harvester operation will generate heat.
UseSpecialistBonus	true false	If set to true crew members can give a bonus to harvester efficiency.
SpecialistEfficiencyFactor	0.2	Efficieny bonus multiplier based on the number of specialists and their skill.
SpecialistBonusBase	0.05	Efficieny bonus base amount for each specialist of the given type.
Specialty	Engineer	Type of specialist required to get the efficiency bonus.
EfficiencyBonus	1	Added efficiency for having a specialist.
INPUT_RESOURCE	Resource defintion	Defines the resource consumed when the harvester is active. Can have multiple INPUT_RESOURCE definitions.
TemperatureModifier	Temperature modifier defintion	Unknown.
ThermalEfficiency	Thermal efficiency definition	Efficiency related to part temperature.

MODULE
{
  name = ModuleResourceHarvester
  HarvesterType = 0
  Efficiency = 1.5
  ResourceName = Ore
  ConverterName = Surface Harvester
  StartActionName = Start Surface Harvester
  StopActionName = Stop Surface Harvester
  ToggleActionName = Toggle Surface Harvester
  ImpactTransform = ImpactTransform
  ImpactRange = 5
  AutoShutdown = true
  GeneratesHeat = true
  UseSpecialistBonus = true
  SpecialistEfficiencyFactor = 0.2
  SpecialistBonusBase = 0.05
  Specialty = Engineer
  EfficiencyBonus = 1
  INPUT_RESOURCE
  {
    ResourceName = ElectricCharge
    Ratio = 15
  }
  TemperatureModifier
  {
    key = 0 10000
    key = 250 7500
    key = 500 5000
    key = 750 500
    key = 1000 0
  }		
  ThermalEfficiency 
  {
    key = 0 0.1
    key = 250 .1
    key = 500 1
    key = 750 .1
    key = 1000 0
  }
}

ModuleResourceIntake

Used to create a part that produces a resource based on interaction with the environment.

variable	example	definition
resourceName	IntakeAir	defines the type of resource produced by this module. Any resource may be used for this purpose, including those not defined at all
checkForOxygen	true false	An optional method that specifies this module must check to see if oxygen/atmosphere is present whenever attempting to generate the requested resource.
area	0.004	area is the amount of space used for determining how much resource to produce. The larger the number, the more of the resource is produced per second.
intakeSpeed	10	unknown. Assumed to be a minimum m/s measure to determine if this module operates or not.
intakeTransformName	Intake	unknown.

MODULE
{
  name = ModuleResourceIntake
  resourceName = IntakeAir
  checkForOxygen = true
  area = 0.006
  intakeSpeed = 10
  intakeTransformName = Intake  
}

ModuleSAS

Used as a reference to determine whether this part is activated by the SAS function of the interface. ie. when you turn on SAS, turn on this part. NOTE: [0.90] added SASServiceLevel (0-3)

variable	example	definition
SASServiceLevel	0 1 2 3	defines the required level of building development for each different SAS capabilities (markers on the nav ball)

MODULE
{
 name = ModuleSAS
 SASServiceLevel = 1
}

ModuleScienceContainer

A place to store the results of a science experiment.

variable	example	definition
reviewActionName	Flavor Text	for reviewing the data contained in a science container.
storeActionName	Flavor text	for placing data into a science container.
collectActionName	Flavor text	for removing data from a science container.
evaOnlyStorage	True False	Specifies whether or not data storage is restricted to EVA activities.
storageRange	0.5	Distance, expressed in meters, a Kerbal must be within in order to interact with data and this container.
allowRepeatedSubjects	True False	Uncertain

MODULE
{
 name = ModuleScienceContainer
 
 reviewActionName = Review Stored Data
 storeActionName = Store Experiments
 evaOnlyStorage = True
 storageRange = 4.0
}

ModuleScienceExperiment

A place to conduct a science experiment.

variable	example	definition
experimentID	evaReport mysteryGoo surfaceSample mobileMaterialsLab temperatureScan barometerScan seismicScan gravityScan atmosphereAnalysis asteroidSample	This refers to the Experiment IDs listed in ScienceDefs.cfg under each EXPERIMENT_DEFINITION{}
experimentActionName	Flavor text	for contextual menu to describe to the player what the part does when collecting data
resetActionName	Flavor text	for contextual menu to describe to the player what the part does when collecting data
reviewActionName	Flavor text	for contextual menu to describe to the player what the part does when collecting data
useStaging	True False	specifies whether this module can be activated through the normal staging system
useActionGroups	True False	specifies whether this module can be activated by an Action Group
hideUIwhenUnavailable	True False	specifies whether this module will show its activation buttons through the contextual menu, even if it is not available
rerunnable	True False	specifies whether this experiment can be rerun.
xmitDataScalar	0.35	Specifies the share of science data that can be recovered via the antenna. In this example 35% can be recovered.
FxModules	0	The index of the module, starting from 0, playing the animation, if any, for this science instrument. The module must implement IScalarModule so must be ModuleAnimateGeneric or a descendant.
dataIsCollectable	True False	Uncertain. Presumed to indicate whether a Kerbal on EVA can retrieve data from this experiment
collectActionName	Flavor text	If data is collectible, this is the flavor text for collecting that data
interactionRange	0.5	The range, expressed in meters, from which a Kerbal on EVA can interact with this module (for example to reset the experiment)
usageReqMaskInternal	(ExperimentUsageReqs)	How the experiment can be triggered by the parent Vessel.
usageReqMaskExternal	(ExperimentUsageReqs)	How the experiment can be triggered by EVA Kerbals.

ExperimentUsageReqs

Name	Value	Notes
Never	-1	Experiment can't be used at all
Always	0	Experiment can always be used
VesselControl	1	Experiment can be used if vessel is (see ExperimentUsageReqs)under control (probe or crew)
CrewInVessel	2	Experiment can only be used if vessel is crewed.
CrewInPart	4	Experiment can only be used if part contains crew.
ScientistCrew	8	Experiment can only be used if crew is scientist.

MODULE
{
 name = ModuleScienceExperiment 
 
 experimentID = atmosphereAnalysis
 
 experimentActionName = Run Atmosphere Analysis
 resetActionName = Discard Data
 reviewActionName = Review Data
 
 useStaging = False 
 useActionGroups = True
 hideUIwhenUnavailable = True 
 rerunnable = True
  
 xmitDataScalar = 0.35
  
 dataIsCollectable = True
 collectActionName = Download Data
 interactionRange = 1.2
}

ModuleScienceLab

A place to modify a science experiment prior to transmission in order to gain more research points from it.

variable	example	definition
containerModuleIndex	0	Specifies ModuleScienceContainer location in order in cfg file. 0 is first module listing, 1 is two and so on.
dataTransmissionBoost	1.5	Unknown
crewsRequired	2	Minimum number of Kerbals in the part needed to operate this module
canResetConnectedModules	True False	Unknown. Presumed to indicate whether modules attached to this part can be reset from this module
canResetNearbyModules	True False	Presumed to indicate whether modules attached to this vessel can be reset from this module
interactRange	1.2	Limit of range (in meters) that modules attached to this vessel can be reset. Uncertain.
REOURCE_PROCESS	{}
name	ElectricCharge	names the resource required, e.g.: ElectricCharge
amount	10	specified, numerical, the number of units of the specified resource expended

MODULE
{
 name = ModuleScienceLab
 
 containerModuleIndex = 0 
 dataTransmissionBoost = 1.15 
 crewsRequired = 2
 
 canResetConnectedModules = True
 canResetNearbyModules = True
 interactionRange = 5
 
 RESOURCE_PROCESS
 {
  name = ElectricCharge
  amount = 10
 }
}

ModuleSteering

Specifies that this part is steerable and provides the axis and animation information for steering the part.

variable

example

definition

controlAxisType

Forward

Unsure. May have something to do with directional control

steeringAxis

0, 0, 1

specifies the 3-dimensional axis of steering control.

steeringTransformName

Steering

unknown

steeringLocked

true
false

specifies whether the part's steering starts locked

steeringCurve


0	16
10	9
30	2
100	1

multi-array of keys,

MODULE
{
 name = ModuleSteering
 controlAxisType = Forward
 steeringAxis = 0, 0, 1
 steeringTransformName = Steering
 steeringLocked = true
 steeringCurve
  {
     key = 0 16
  key = 10 9
    key = 30 2
  key = 100 1
  }
}

ModuleTestSubject

Used for the contract system, determines atmospheric conditions under which this part may be considered for testing. Also specifies whether the part is able to be tested using the Staging process or must be manually selected and "Perform Test" used to satisfy contract requirements.

variable	example	definition
environments (Deprecated. Use situationMask instead)	15 1	A single numerical value, between 0 (nowhere) and 15 (anywhere), that specifies the atmospheric conditions the part may be tested under. Add numbers together to specify multiple environments 0 = nowhere 1 = the surface of; srf 2 = the ocean of; ocean 3 = the surface or ocean of; srf, ocean 4 = the atmosphere of; atmo 5 = the surface or atmosphere of; srf, atmo 6 = the ocean or atmosphere of; ocean, atmo 7 = the surface, ocean or atmosphere of; srf, ocean, atmo 8 = the space above; space 9 = the surface or space above; srf, space 10 = the ocean or space of; srf, ocean, space 11 = the surface, ocean or space of; srf, ocean, space 12 = the space or atmosphere of; atmo, space 13 = the surface, space or atmosphere of; srf, atmo, space 14 = the ocean, space, or atmosphere of; ocean, atmo, space 15 = anywhere; srf, ocean, atmo, space
useStaging	True False	specifies whether the part can be tested using the Staging Process
useEvent	True False	specifies whether the part can be tested using the "Perform Test" action.
situationMask	16 63	A binary mask for defining the situation. SrfLanded = 1, SrfSplashed = 2, FlyingLow = 4, FlyingHigh = 8, InSpaceLow = 16, InSpaceHigh = 32 Hidden Flag (not sure what this does, but several engine cfgs have a 7th flag tripped, value equaling 127) = 64
CONSTRAINT	{ type = REPEATABILITY value = ALWAYS prestige = Trivial } { type = ALTITUDEENV test = LT value = 1000 situationMask = 8 prestige = Trivial }	Constraints define different attributes of a test. type - The type of constraint. Can have values such as : SPEED SPEEDENV ALTITUDE ALTITUDEENV DENSITY DYNAMICPRESSURE OXYGEN ATMOSPHERE SITUATION REPEATABILITY test - An optional parameter. Relevant when type isn't set to 'REPEATABILITY'. Can have values such as: GT LT EQ NEQ value - Defines whether or not this test can be repeated. Can have values such as: ALWAYS BODYANDSITUATION ONCEPERPART prestige - Defines the prestige level for the test. Can have values such as: Trivial Significant Exceptional body - Defines what celestial body can be used for the test . Can have values such as: _NotHome (disables every flag but Kerbin) _NotSun (unclear what this does, but might disable every celestial body but Kerbol?) situationMask - Overrides the situationMask value for this constraint only: SrfLanded = 1, SrfSplashed = 2, FlyingLow = 4, FlyingHigh = 8, InSpaceLow = 16, InSpaceHigh = 32

       MODULE
	{
		name = ModuleTestSubject
		useStaging = True
		useEvent = True
		situationMask = 60
		CONSTRAINT
		{
			// disable all but home
			type = SITUATION
			value = 0
			body = _NotHome
			prestige = Trivial
		}
		CONSTRAINT
		{
			// disable all but home
			type = SITUATION
			value = 0
			body = _NotHome
			prestige = Significant
		}
		CONSTRAINT
		{
			type = REPEATABILITY
			value = ALWAYS
			prestige = Trivial
		}
		CONSTRAINT
		{
			type = REPEATABILITY
			value = BODYANDSITUATION
			prestige = Significant
		}
		CONSTRAINT
		{
			type = REPEATABILITY
			value = ONCEPERPART
			prestige = Exceptional
		}
		CONSTRAINT
		{
			type = ALTITUDEENV
			test = GT
			value = 4000
			prestige = Trivial
		}
		CONSTRAINT
		{
			type = ALTITUDEENV
			test = LT
			value = 8000
			prestige = Trivial
		}
		CONSTRAINT
		{
			type = ALTITUDEENV
			test = GT
			value = 2000
			prestige = Significant
		}
		CONSTRAINT
		{
			type = ALTITUDEENV
			test = LT
			value = 4000
			prestige = Significant
		}
		CONSTRAINT
		{
			type = ALTITUDEENV
			test = GT
			value = 1000
			prestige = Exceptional
		}
		CONSTRAINT
		{
			type = ALTITUDEENV
			test = LT
			value = 2000
			prestige = Exceptional
		}
		CONSTRAINT
		{
			type = ALTITUDE
			test = GT
			value = 0 // this just registers altitude as something to care about
			situationMask = 8
		}
		CONSTRAINT
		{
			type = ALTITUDE
			test = LT
			value = 300000
			situationMask = 16
			body = _NotSun
		}
		CONSTRAINT
		{
			type = ALTITUDE
			test = LT
			value = 600000
			situationMask = 32
			body = _NotSun
		}
		CONSTRAINT
		{
			type = SPEED
			test = GT
			value = 0
			situationMask = 8
			prestige = Trivial
		}
		CONSTRAINT
		{
			type = SPEED
			test = LT
			value = 600
			situationMask = 8
			prestige = Trivial
		}
		CONSTRAINT
		{
			type = SPEED
			test = GT
			value = 0
			situationMask = 8
			prestige = Significant
		}
		CONSTRAINT
		{
			type = SPEED
			test = LT
			value = 900
			situationMask = 8
			prestige = Significant
		}
		CONSTRAINT
		{
			type = SPEED
			test = GT
			value = 300
			situationMask = 8
			prestige = Exceptional
		}
		CONSTRAINT
		{
			type = SPEED
			test = LT
			value = 1200
			situationMask = 8
			prestige = Exceptional
		}
		CONSTRAINT
		{
			type = SPEEDENV
			test = LT
			value = 200
			prestige = Trivial
		}
	}

ModuleWheel

The better version of landingGear, with lots more options for the operation of wheels, including adding power, steering, and damage information.

variable	example	definition
hasMotor	true false	specifies whether the wheel has a powered propulsion system
resourceName	ElectricCharge	specifies the resource(s) used by powered propulsion system
resourceConsumptionRate	1.0	specifies the rate of consumption of resources for the powered propulsion system in units/second
canSteer	true false	specifies whether this wheel is steerable
controlAxisType	Forward	If steerable, specifies the axis type
steeringModeType	AutomaticSteer TankSteer	uncertain: may refer to rack-and-pinion versus Track-type steering
brakeTorque	300	the dV (in m/s) of torque applied when using the breaks
brakeSpeed	1.2	the dV (in m/s) that braking will slow the vehicle under optimum conditions
impactTolerance	2000	dV that this part can withstand before breaking
overSpeedDamage	60	uncertain. possibly reserved for future use, possible that this is the amount of dV of damage applied to this part whenever it exceeds it's rated speed
WHEEL	{}
wheelName	wheel	Internal name of the wheel
wheelColliderName	wheelCollider	Internal name of the collider mesh for the wheel
suspensionTransformName	suspensionTraverse	Animation for suspension usage
suspensionNeutralPointName	suspensionNeutralPoint	Animation for the neutral point of the suspension
damagedObjectName	bustedwheel	If you break it, you bought, and this is what you'll call it
rotateX	0
rotateY	1
rotateZ	0
steeringCurve	{}	keys, 0 16 10 9 30 2
torqueCurve	{}	keys 0 250 0 0 20 100 0 0 30 14 0 0 34 0 0 0

MODULE
{
	name = ModuleWheel
	hasMotor = true
	resourceName = ElectricCharge
        resourceConsumptionRate = 0.5
	canSteer = true
	controlAxisType = Forward
	steeringModeType = AutomaticSteer
	brakeTorque = 180
	brakeSpeed = 1.0
	impactTolerance = 65
	overSpeedDamage = 20

	WHEEL
	{
	    wheelName = wheel
	    wheelColliderName = wheelCollider
	    suspensionTransformName = suspensionTraverse
	    suspensionNeutralPointName = suspensionNeutralPoint
	    damagedObjectName = bustedwheel
	    rotateX = 0
	    rotateY = 1
	    rotateZ = 0
	}

	steeringCurve
 	{
   	 key = 0 18
	 key = 15 6
 	}

	torqueCurve
	{
	  key = 0 170 0 0 
	  key = 2.5 100 0 0
	  key = 12 0 0 0
	}


}

MultiModeEngine

Specifies that this part is an engine with multiple modes. Added in [0.90], it allows for engines that use different types of resources and provides different flight characteristics depending on which mode it is operating in. This module defines the different modes and passes them to moduleEnginesFX.

variable	example	definition
primaryEngineID	AirBreathing ClosedCycle	this is passed to ModuleEnginesFX to determine the properties for this mode
secondaryEngineID	AirBreathing ClosedCycle	this is passed to ModuleEnginesFX to determine the properties for this mode

MODULE
{
 name = MultiModeEngine
 primaryEngineID = AirBreathing
 secondaryEngineID = ClosedCycle
}

RetractableLadder

Just like the name implies, this module is attached to parts that are or contain a retractable or collapsible ladder.

variable	example	definition
ladderAnimationRootName	TelusBay Telescopic ladder	name of the beginning animation for this module
ladderColliderName	ladderCollider	name of the collider mesh for this module
ladderRetractAnimationName	Retract	name of the retraction animation for this module

MODULE
{
 name = RetractableLadder
 
 ladderAnimationRootName = TelusBay
 ladderColliderName = ladderCollider
 ladderRetractAnimationName = Retract
}

MODULES FROM MODS

Defining a module is a task in and of itself and one that I'm sure has already been covered in other places. Many modules defined by mods are duplicating effects that could be created with stock modules, but for one reason or another, the mod owner has decided to create their own modules (possibly for degree of control, possibly because the stock module didn't quite do everything they needed). In any event, I've looked at some of the Mod modules, and detailed them below. By mod, they are:

Kerbal Assembly System

Kerbal Assembly System is most noted for adding the option to grab and move parts using Kerbals. It also allows for storage of certain parts in containers.

MODULE:NEEDS[KAS] for the module

KASModuleContainer

Specifies that this part can serve as a container for other parts, and how much storage space the part has. Also included is an interaction distance. Kerbals must be this close or closer to open the container. Lots of sounds.

variable	example	definition
maxSize	5 20 80	specifies the size of the container relative to Kerbal Attachment System parts.
maxOpenDistance	1 5	Kerbals must be at least this close (in meters) in order to open the container
sndStorePath	KAS/Sounds/hookBayStore	sound stuff
sndOpenPath	KAS/Sounds/containerOpen	sound stuff for opening the container
sndClosePath	KAS/Sounds/containerClose	sound stuff for closing the container
bipWrongSndPath	KAS/Sounds/bipwrong	sound stuff

MODULE
{
 name = KASModuleContainer
 maxSize = 80
}

ModuleConnectedLivingSpace

variable	example	definition
passable	true false	specifies whether Kerbals can commute to parts connected to this part
passableWhenSurfaceAttached	true false	can be passed through even when connected to the ground?

MODULE
{
 name = ModuleConnectedLivingSpace
 passable = true
 passableWhenSurfaceAttached = true 
}

KASModulePartBay

variable

example

definition

BAY

{}

attachNode	top bottom	attachment placement
type	containerA container hookBay

MODULE
{
 name = KASModulePartBay
 BAY
 {
  attachNode = top
  type = containerA
  type = containerB
 }
}

KASModulePort

variable	example	definition
attachNode	top	unsure
nodeType	kasplug	unknown
breakForce	30	unknown
nodeTransformName	plugNode	unknown

MODULE
{
 name = KASModulePort
 attachNode = top
 nodeType = kasplug
 breakForce = 30
 nodeTransformName = plugNode
}

KASModuleAnchor

variable	example	definition This module will set a custom drag value when the part touch the ground.
groundDrag	500	Drag value of the anchor when it touch the ground
bounciness	0	Bounciness of the anchor
dynamicFriction	0.8	Dynamic friction of the anchor when it touch the ground
staticFriction	0.8	Static friction of the anchor when it touch the ground

MODULE
{
 name = KASModuleAnchor
 groundDrag = 500
 bounciness = 0
 dynamicFriction = 0.8 
 staticFriction = 0.8
}

KASModuleMagnet

This module will make the part acting like a magnet, collided part will be automatically attached. Only work when attached on a winch.

variable	example	definition
breakForce	10	The force that needs to be applied on the magnet joint to break.
attachToEva	true false	Disable/enable attraction of eva
minFwdDot	0.998	Minimum magnet alignement needed to attach (1 is perfectly aligned)
powerDrain	4	Power consumption when the magnet is used

MODULE
{
 name = KASModuleMagnet
 breakForce = 10
 attachToEva = False
 minFwdDot = 0.998
 powerDrain = 4
}

KASModuleStrut

variable	example	definition
nodeTransform	pipeNode strutNode	unknown
type	PipeSize1 StrutSize1	Unkown
maxLength	20 8	unknown
maxAngle	100	unknown
breakForce	10	unknown
allowDock	true false	unknown
allowPumpFuel	true false	unknown
hasCollider	true false	unknown
tubeScale	0.15	unknown
jointScale	0.15	unknown
textureTiling	1 4	unknown
tubeSrcType	Joined Rounded	Unknown
tubeTgtType	Joined Rounded	unknown
evaStrutPos	(0.05, 0.059, -0.21)	unknown
evaStrutRot	(190.0, 0.0, 0.0)	unknown
tubeTexPath	KAS/Textures/pipe	unknown

MODULE
{
 name = KASModuleStrut 
 nodeTransform = pipeNode
 type = PipeSize1 
 maxLenght = 20
 maxAngle = 100
 breakForce = 10
 allowDock = true
 allowPumpFuel = true
 hasCollider = false
 tubeScale = 0.15
 jointScale = 0.15
 textureTiling = 1
 tubeSrcType = Joined
 tubeTgtType = Joined
 evaStrutPos = (0.05, 0.059, -0.21)
 evaStrutRot = (190.0, 0.0, 0.0)
        tubeTexPath = KAS/Textures/pipe
}

KASModuleGrapplingHook

This module will make the part acting like a grappling-hook, any collided part in front of the grapple will be automatically attached if the inpact is strong enough. Only work when attached on a winch.

variable	example	definition
partBreakForce	6	The force that needs to be applied on the grapple/part joint to break.
staticBreakForce	15	The force that needs to be applied on the grapple/static joint to break.
aboveDist	0.05	Distance from the attach point to the center of the part
forceNeeded	4	Collision force needed to attach the grapple.
attachToPart	true false	Disable/enable attachment on parts.
rayDir	(0,-1,0)	Direction of the attach raycast. Attachment will be done only with objects in that direction.
rayLenght	0.8	Attach ray lenght.

MODULE
{
 name = KASModuleGrapplingHook
 partBreakForce = 6
 staticBreakForce = 15
 aboveDist = 0.05
 forceNeeded = 4
 attachToPart = true
 rayDir = (0,-1,0) 
 rayLenght = 0.8
}

KASModuleWinch

variable	example	definition
maxLenght	50 80	unknown
cableSpring	1000
cableDamper	0.1
cableWidth	0.04
motorMaxSpeed	2
motorAcceleration	0.05
powerDrain	0.5 0.3
headTransformName	head
headPortNodeName	portNode
connectedPortNodeName	bottom front
anchorNodeName	anchorNode
evaGrabHeadPos	(0.05, 0.01, -0.11)
evaGrabHeadDir	(0,0,1)
evaDropHeadPos	(0.05, 0.01, -0.16)
evaDropHeadRot	(180.0, 0.0, 0.0)
ejectEnabled	true false
ejectForce	20
lockMinDist	0.12
lockMinFwdDot	0.90

MODULE
{
 name = KASModuleWinch
 maxLenght = 50
 cableSpring = 1000
 cableDamper = 0.1
 cableWidth = 0.04
 motorMaxSpeed = 2
 motorAcceleration = 0.05
 powerDrain = 0.5
 headTransformName = head
 headPortNodeName = portNode
 connectedPortNodeName = bottom
 anchorNodeName = anchorNode
 evaGrabHeadPos = (0.05, 0.01, -0.11)
 evaGrabHeadDir = (0,0,1)
 evaDropHeadPos = (0.05, 0.01, -0.16)
 evaDropHeadRot = (180.0, 0.0, 0.0)
 ejectEnabled = true
 ejectForce = 20
 lockMinDist = 0.12
 lockMinFwdDot = 0.90
}

Universal Storage

Universal Storage. By the by: Excellently documented!

ModuleAnimator

Animation module.

variable	example	definition
animationName	Take 001	Name of the animation from the model.
guiEnableName	Wedge Locks Off	Part tooltip name to display for deployment
guiDisableName	Wedge Locks Off	Part tooltip name to display for retraction
actionEnableName	Wedge Locks Off	Action group name for deployment
actionDisableName	Wedge Locks On	Action group name for retraction
animationSpeed	100000	Speed of the animation
oneShot	true false	If the animation can only be played once
activeEditor	true false	If the part toolitp is visible in the editor
activeFlight	true false	If the part tooltip is visible in flight
activeUnfocused	true false	If the part tooltip is visible from EVA
unfocusedRange	5	EVA visible range

 MODULE
 {
  name = ModuleAnimator
  animationName = Take 001
  guiEnableName = Wedge Locks Off
  guiDisableName = Wedge Locks On
  actionEnableName = Wedge Locks Off 
  actionDisableName = Wedge Locks On 
  
  animationSpeed = 100000
  oneShot = false
  activeEditor = true
  activeFlight = false
  activeUnfocused = false
  unfocusedRange = 5
 }

Umbra Space Industries:Regolith

Note: DEPRECATED (use stock resource converter's)

REGO_ModuleResourceConverter

variable	example	definition
ConverterName	Water Electrolizer	Flavor Text
StartActioName	Start Water Electrolizer	Flavor Text
StopActioName	Stop Water Electrolizer	Flavor Text
RecipeInputs	ElectricCharge, 14, Water, 0.0000176697
RecipeOutputs	Hydrogen, 0.0219907427, True, Oxygen, 0.0109953713, False

MODULE
{
  name = REGO_ModuleResourceConverter
  ConverterName = Water Electrolizer
  StartActionName = Start Water Electrolizer
  StopActionName = Stop Water Electrolizer
  RecipeInputs = ElectricCharge, 14, Water, 0.0000176697
  RecipeOutputs = Hydrogen, 0.0219907427, True, Oxygen, 0.0109953713, False
}

Umbra Space Industries: ExpPack

USI is widely known for building an entire add-on family of interconnected and cross-supported parts and extensions. Here we detail mods added by the ExpPack.

USI_ClearIVA

No calls.

MODULE
{
 name = USI_ClearIVA
}

@@ Line 1: / Line 1: @@
-Modules define what specific parts can do.  They are generally calls to C-coded or hard-coded functions that define what functionality these parts have in-game.  If you are a new part designer, modder, engineer, or someone else who makes parts, please check the STOCK modules list '''before''' designing a new module.  Each additional module increases the CPU workload and reduces FPS and Physics.
+{{TOC|align=right}}
+== STOCK MODULES ==
+Modules define what specific parts can do.  They are generally calls to C-coded or hard-coded functions that define what functionality these parts have in-game.  If you are a new part designer, modder, engineer, or someone else who makes parts, please check the STOCK modules list '''before''' designing a new module.  Each additional module increases the CPU workload and reduces FPS and Physics.  All 0.90 stock modules are now included.
 {|class="wikitable"
 |-
-| name ||names define the module in use and are a general indication of what the module subtype does.  Specific variables are associated with each [module].[name].  For example, the Clamp-O-Tron Docking Port Sr. has the MODULE.name ModuleDockingNode and its' associates variables are [referenceAttachNode] and [nodeType].  Some [MODULE]s share variables with other modules, which can make deciphering their purpose difficult.
+| name
+| names define the module in use and are a general indication of what the module subtype does.  Specific variables are associated with each [module].[name].  For example, the Clamp-O-Tron Docking Port Sr. has the MODULE.name ModuleDockingNode and its' associates variables are [referenceAttachNode] and [nodeType].  Some [MODULE]s share variables with other modules, which can make deciphering their purpose difficult.
 |}
-== STOCK MODULES ==
+{|
+! explanation
+! code examples
+|-
+|
-{|
+=== CModuleFuelLine ===
-! explanation !! code examples
+No known arguments or variables at this time.  This module is used by fuelLine, presumably to specify that it is fuel Transfer enabled.  More research is clearly called for.  This module is new in 0.90.
+||
+<pre>
+MODULE
+{
+ name = CModuleFuelLine
+}
+</pre>
 |-
 |
-=== FlagDecal ===
+=== CModuleLinkedMesh ===
+This module is new in 0.90 and is used by fuelLine and strutConnector, presumably to created the variable length connectors between two parts (and add end caps on both sides).
 {|class="wikitable"
 ! variable !! example !! definition
 |-
-| textureQuadName
+| lineObjName
 ||
-* flagTransform
+* obj_line
+* obj_strut
 || specifies whether there is a flag displayed on the exterior surface of the object.
+|-
+| targetAnchorName
+||
+* obj_targetAnchor
+|| Unknown
+|-
+| anchorCapName
+||
+* obj_AnchorCap
+|| name of the part on the source part that this part attaches from
+|-
+| targetCapName
+||
+* obj_targetCap
+|| name of the part on the target part to which this mesh attaches
+|-
 |}
 ||
@@ Line 25: / Line 59: @@
 MODULE
 {
-      name = FlagDecal
+ name = CModuleLinkedMesh
-      textureQuadName = flagTransform
+ lineObjName = obj_line
+    targetAnchorName = obj_targetAnchor
+    anchorCapName = obj_anchorCap
+    targetCapName = obj_targetCap
 }
 </pre>
 |-
+|
-|
+=== CModuleStrut ===
-=== FXModuleAnimateThrottle ===
+This module is new in 0.90 and is used by strutConnector, presumably to indicate that it is a structural support part.
 {|class="wikitable"
 ! variable !! example !! definition
 |-
+| linearStrength
+||
+* 100
+* 150
+|| the push/pull strength of the strut
 |-
-| animationName ||
+| angularStrength
-* colorAnimation
+||
-|| specifies the animation to be used
+* 100
-|-
+* 150
-| depondOnEngineState ||
+|| the sheering strength of the strut
-* True
-* False
-|| specifies whether the animation is dependent on the throttle
 |-
-| responseSpeed ||
-* 0.5
-|| specifies the rate at which the animation reacts to the change in engine state
 |}
 ||
 <pre>
 MODULE
 {
-      name = FXModuleAnimateThrottle
+ name = CModuleStrut
-      animationName = colorAnimation
-      dependOnEngineState = True
+ linearStrength = 150
-      responseSpeed = 0.5
+ angularStrength = 150
 }
 </pre>
 |-
 |
-=== FXModuleConstrainPosition ===
+=== FlagDecal ===
+Parts with this module have a place for a flag on their sides.  You don't have to turn it on, but this is how it gets there.
 {|class="wikitable"
 ! variable !! example !! definition
 |-
+| textureQuadName
+||
+* flagTransform
+|| specifies whether there is a flag displayed on the exterior surface of the object.
+|}
+||
+<pre>
+MODULE
+{
+      name = FlagDecal
+      textureQuadName = flagTransform
+}
+</pre>
 |-
-| matchRotation ||
-* true
+|
-* false
+=== FXModuleAnimateThrottle ===
-|| unknown
+Animation for engines and engine bells showing them as they fire up and operate, based on the amount of throttle applied.  See ion Engines for a good example.
-|-
+{|class="wikitable"
-| matchPosition ||
+! variable !! example !! definition
-* true
-* false
-|| unknown
 |-
-| CONSTRAINFX || {}  || unknown
 |-
-| targetName ||
+| animationName ||
-* Steering
+* colorAnimation
-* steering
+|| specifies the animation to be used
-|| unknown
 |-
-| moversName ||
+| depondOnEngineState ||
-* wheelCollider
+* True
-* steering
+* False
-|| unknown
+|| specifies whether the animation is dependent on the throttle
+|-
+| responseSpeed ||
+* 0.5
+|| specifies the rate at which the animation reacts to the change in engine state
 |}
 ||
 <pre>
 MODULE
 {
-	name = FXModuleConstrainPosition
+      name = FXModuleAnimateThrottle
-	matchRotation = true
+      animationName = colorAnimation
-	matchPosition = false
+      dependOnEngineState = True
-	CONSTRAINFX
+      responseSpeed = 0.5
-	{
-		targetName = steering
-		moversName = lateral
-	}
 }
 </pre>
 |-
 |
-=== FXModuleLookAtConstraint ===
+=== FXModuleConstrainPosition ===
+Copies the rotation and/or position (matchRotation/matchPosition) from targetName to moversName. Used by for example wheels to copy the rotation of the steering part to the wheel collider.
 {|class="wikitable"
 ! variable !! example !! definition
 |-
 |-
-| CONSTRAINLOOKFX || {}  ||
+| matchRotation ||
+* true
+* false
+|| Should targetNames rotation be applied to moversName?
 |-
-| targetName ||
+| matchPosition ||
-* susp2-1
+* true
-|| No idea
+* false
+|| Should targetName's position be applied to moversName?
+|-
+| CONSTRAINFX || {}  || unknown
+|-
+| targetName ||
+* Steering
+* steering
+|| gameObject to copy targetName's world position/rotation of.
 |-
-| rotatorsName ||
+| moversName ||
-* susp2-2
+* wheelCollider
-|| No idea
+* steering
+|| gameObject to apply targetName's world position/rotation to.
 |}
 ||
 <pre>
 MODULE
 {
-  name = FXModuleLookAtConstraint
+	name = FXModuleConstrainPosition
-  CONSTRAINLOOKFX
+	matchRotation = true
-  {
+	matchPosition = false
-   targetName = susp2-1
+	CONSTRAINFX
-   rotatorsName = susp2-2
+	{
-  }
+		targetName = steering
-  CONSTRAINLOOKFX
+		moversName = lateral
-  {
+	}
+}
+</pre>
+|-
+|
+=== FXModuleLookAtConstraint ===
+Makes two gameObject "look" at each other, for example in suspensions where the piston must "look" at the cylinder. The gameObjects must be aligned so it rotates around it's local X axis and looks down it's local Z axis.
+{|class="wikitable"
+! variable !! example !! definition
+|-
+|-
+| CONSTRAINLOOKFX || {}  ||
+|-
+| targetName ||
+* susp2-1
+|| gameObject to target rotatorsName at.
+|-
+| rotatorsName ||
+* susp2-2
+|| gameObject to rotate so that it looks at targetName
+|}
+||
+<pre>
+MODULE
+{
+  name = FXModuleLookAtConstraint
+  CONSTRAINLOOKFX
+  {
+   targetName = susp2-1
+   rotatorsName = susp2-2
+  }
+  CONSTRAINLOOKFX
+  {
    targetName = susp2-2
    rotatorsName = susp2-1
@@ Line 160: / Line 251: @@
 === KerbalSeat ===
+This module makes the part have an EXTERIOR seat.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 187: / Line 279: @@
 === LaunchClamp ===
+This module enables the part to hold a vessel in suspension on the launch pad.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 230: / Line 323: @@
 === ModuleAlternator ===
 Specifies that this part produced a resource, based on the percentage of thrust produced by the engine.
 {|class="wikitable"
 |-
@@ Line 245: / Line 337: @@
 |}
 |}
 ||
 <pre>
@@ Line 262: / Line 353: @@
 === ModuleAnchoredDecoupler ===
+This module specifies that the part is attached (anchored) to another part, and will decouple from yet a third part, forcing the third part away from it.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 293: / Line 385: @@
 === ModuleAnimateGeneric ===
+Generic Animations will be applied to parts with this module.  This module is slowly replacing other animation modules as progression is made towards the release version of KSP.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 321: / Line 414: @@
 * false
 || specifies whether the part can be manually animated
+|-
+| actionAvailable ||
+* '''true'''
+* false
+|| ???
+|-
+| eventAvailableEditor ||
+* '''true'''
+* false
+|| specifies whether the animation can be toggled in the VAB/SPH scene
+|-
+| eventAvailableFlight ||
+* '''true'''
+* false
+|| specifies whether the animation can be toggled in the flight scene
+|-
+| eventAvailableEVA ||
+* '''true'''
+* false
+|| specifies whether the animation can be toggled by a Kerbal on EVA near the vessel or part containing the animation
+|-
+| evaDistance ||
+* 5
+* 10
+|| specifies the maximum distance (in meters) from which a Kerbal on EVA can toggle an animation on the part
+|-
 |}
@@ Line 340: / Line 459: @@
 === ModuleAnimateHeat ===
+This module specifies that heating animation will be applied to this part.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 364: / Line 484: @@
 === ModuleAsteroid ===
+Because it has no procedures or calls, is new in [0.90] and only appears on a part that you must hack to have available, it is impossible to say for certain what this module does, but it has something to do with being an asteroid.
 no procedures or calls
 ||
 <pre>
@@ Line 376: / Line 496: @@
 |
-=== ModuleCommand ===
+=== ModuleCargoBay ===
-Applies Command to vessels
+Allows a [[cargo bay]] to shield its contents from airflow and heat.
 {|class="wikitable"
 ! variable !! example !! definition
 |-
-| minimumCrew ||
+| DeployModuleIndex ||
 * 0
 * 1
 * 2
-||  Specifies the minimum number of crew needed to operate this module.
+||  Specifies the index (starting with zero) of the MODULE which controls whether the bay is open or closed.  Said MODULE must implement IScalarModule (e.g. ModuleAnimateGeneric and its descendents, or ModuleAnimatedDecoupler from [https://github.com/Starwaster/AnimatedDecouplers AnimatedDecouplers]).
+|-
+| closedPosition ||
+* 0
+* 1
+||  Specifies whether the cargo bay is closed by default (0) or open by default (1).
 |-
-| RESOURCE ||
+| lookupRadius ||
-{|class="wikitable"
+* 1.25
+||  Radius within which the part should search for parts to be shielded.
 |-
-| name ||  ElectricCharge  || This is the name of that resource
+| lookupCenter ||
+* 0,0.5,0
+* 1,0,0
+||  Optional (default is 0,0,0).  Specifies the point from which the search is centered.  Rays are cast from here; any parts that are struck are shielded, while the rays stop when the part's own colliders are hit.
 |-
-| rate || 15.0 || and the rate in units/second of resource consumed
+|
-|}
+* nodeOuterForeID
-|| If this Module requires a resource
+* nodeOuterAftID
+* nodeInnerForeID
+* nodeInnerAftID
+||
+* top
+* bottom
+* top2
+* bottom2
+||  Optional.  For hollow cargo bay parts without end walls (e.g. [[Mk2 Cargo Bay CRG-04]]), node IDs are given to determine where the cargo bay ends.
 |}
@@ Line 401: / Line 538: @@
 MODULE
 {
- name = ModuleCommand
+    name = ModuleCargoBay
- minimumCrew = 1
+    DeployModuleIndex = 1
+    closedPosition = 1
+    lookupRadius = 1
+    nodeOuterForeID = top
+    nodeOuterAftID = bottom
+    nodeInnerForeID = top2
+    nodeInnerAftID = bottom2
 }
 </pre>
@@ Line 408: / Line 552: @@
 |
-=== ModuleControlSurface ===
+=== ModuleCommand ===
+Applies Command to vessels
 {|class="wikitable"
 ! variable !! example !! definition
 |-
+| minimumCrew ||
+* 0
+* 1
+* 2
+||  Specifies the minimum number of crew needed to operate this module.
 |-
-| dragCoeff || * 0.5 ||
+| RESOURCE ||
-this value overrides the maximum_drag value
+{|class="wikitable"
 |-
-| deflectionLiftCoeff || * 0.7  || specifies the Coefficient of lift for the part
+| name ||  ElectricCharge  || This is the name of that resource
 |-
-| ctrlSurfaceRange || * 20 || specifies the degrees of operation for the part
+| rate || 15.0 || and the rate in units/second of resource consumed
-|-
+|}
-| ctrlSurfaceArea || * 0.95 || specifies how much of the part affects lift
+|| If this Module requires a resource
 |}
@@ Line 427: / Line 577: @@
 MODULE
 {
-  name = ModuleControlSurface
+ name = ModuleCommand
-  dragCoeff = 0.5
+ minimumCrew = 1
+}
+</pre>
+|-
+|
+=== ModuleControlSurface ===
+This module gives the part the ability to respond to inputs, generally used for aerodynamic parts to expose more or less effective surface to lift and braking forces in atmospheres.
+{|class="wikitable"
+! variable !! example !! definition
+|-
+|-
+| dragCoeff || * 0.5 ||
+this value overrides the maximum_drag value
+|-
+| deflectionLiftCoeff || * 0.7  || specifies the Coefficient of lift for the part
+|-
+| ctrlSurfaceRange || * 20 || specifies the degrees of operation for the part
+|-
+| ctrlSurfaceArea || * 0.95 || specifies how much of the part affects lift
+|}
+||
+<pre>
+MODULE
+{
+  name = ModuleControlSurface
+  dragCoeff = 0.5
   deflectionLiftCoeff = 0.7
   ctrlSurfaceRange = 20
@@ Line 438: / Line 615: @@
 === ModuleDataTransmitter ===
+This module specifies that the part acts as a transmitter of data, typically an antenna of some sort, for broadcasting science data back to the KSC.
 {|class="wikitable"
 ! variable !! example !! definition
+|-
+| antennaType ||
+* DIRECT
+* RELAY
+||  whether the antenna is capable of acting as a relay
 |-
 | packetInterval ||
@@ Line 475: / Line 658: @@
 {
   name = ModuleDataTransmitter
+  antennaType = DIRECT
   packetInterval = 0.18
   packetSize = 2
@@ Line 489: / Line 673: @@
 === ModuleDecouple ===
+ModuleDecouple is a slightly upgraded version of ModuleAnchoredDecoupler, and may replace it in the future.  Allows for decouplers that separate from both parts to which it is attached.
 {|class="wikitable"
 ! variable !! sample !! definition
@@ Line 521: / Line 706: @@
 === ModuleDeployableSolarPanel ===
+Solar panels cannot deploy without this module.  May be possible to use for other modules which unfold.  Optionally specifies whether the part will automatically turn to face the sun.  This is one place where you can say how a part breaks.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 536: / Line 722: @@
 * true
 * false
-|| Assumed to indicate whether the animation will turn the panel towards the sun.
+|| Indicates whether the animation will turn the panel towards the sun.
 |-
 | raycastTransformName ||
 * suncatcher
-|| optional.  unknown.
+|| Specifies the GameObject in Unity with Z+ forward facing the sun that will act as the solar panel.
 |-
 | pivotName ||
 * suncatcher
-|| optional.  unknown.
+|| Specifies the object in Unity which will act as the rotation point for the solar panel sun tracking function.
 |-
 | isBreakable ||
@@ Line 593: / Line 779: @@
 | referenceAttachNode ||
 * top
 * bottom
+* dockingNode
 ||
-Specifies the node on the part that is used for the docking port, generally top or bottom
+Specifies the node on the part that is used for the docking port, generally top or bottom. dockingNode is the name of the GameObject transform in Unity with Z+ forward.
 |-
 | deployAnimationController ||
@@ Line 607: / Line 794: @@
 * size0
 || Specifies the type of node for attachment.  When perform docking operations, nodes must have the same value for nodeType in order to dock with one another.
+|-
+| nodeTransformName ||
+* dockingNode
+* DOCKING
+|| unknown
 |-
 | controlTransformName ||
 * controlNode
 || apparently only used for docking nodes that have related animations, see dockingPortInline
+|-
+| undockEjectionForce ||
+* 0.25
+|| Force in d/v applied on undock
+|-
+| minDistanceToReEngage ||
+* 3.5
+|| Docking Nodes must separate by this many meters before being able to reengage
+|-
+| acquireForce ||
+* 3.5
+|| magnetic grip, in d/v
+|-
+| acquireTorque ||
+* 3.5
+|| rotational magnetic grip, in d/v
+|-
+| acquireRange ||
+* 3
+|| maximum distance to begin applying magnetic grip
+|-
+| captureRange ||
+* 1.5
+|| maximum range to begin docking
+|-
+| snapRotation ||
+* True
+* False
+|| specifies whether to enforce docking at multiple rotational offsets rather than a single allowable angle
+|-
+| snapOffset ||
+* 45
+* 90
+* 120
+|| specifies what rotational offsets (in degrees) docking is allowed
+|-
+| acquireMinRollDot ||
+* 0.95
+* 0.99999
+|| specifies the minimum angular accuracy between docking ports for applying magnetic grip; higher values imply better accuracy
+|-
+| captureMinRollDot ||
+* 0.95
+* 0.99999
+|| specifies the minimum angular accuracy between docking ports to begin docking; higher values imply better accuracy
+|-
+| gendered ||
+* True
+* False
+|| specifies whether to enforce gendered docking; defaults to false (androgynous)
+|-
+| genderFemale ||
+* True
+* False
+|| if gendered (see above) is true, this specifies whether the docking port can only docking with another port of the same type but different gender; defaults to true, which means it can only dock with another port with genderFemale=false
+|-
 |}
@@ Line 620: / Line 868: @@
   referenceAttachNode = top
   nodeType = size2
+ undockEjectionForce = 0.25
+ minDistanceToReEngage = 3.5
+ acquireForce = 3.5
+ acquireTorque = 3.5
+ acquireRange = 3.0
+ captureRange = 1.5
+ snapRotation = false
 }
 </pre>
@@ Line 626: / Line 881: @@
 === ModuleEngines ===
+Everything about your engine, all in one module!
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 631: / Line 887: @@
 | thrustVectorTransformName ||
 * thrustTransform
-|| unknown purpose.  Known arguments:
+|| specifies gameObject to be used as point of applied thrust, force is applied in local +Z. standard name is thrustTransform, but it can be anything as long as gameObject in the MU matches thrustVectorTransformName value in module config
 |-
 | throttleLocked ||
@@ Line 645: / Line 901: @@
 | ignitionThreshold ||
 * 0.1
-|| appears to not be used.  Suggests a minimum thrust output value, below which the engine will no longer operate.
+||minimum required resource(s) for engine to start. If engine has less than specified value in resource(s), it will not start. Think of it as if your car needs at least half full tank to start.
 |-
 | minThrust ||
@@ Line 718: / Line 974: @@
 Translates directly to ISP.  In order to make a more efficient engine, set the second number of this array higher.
 |-
-| velocityCurve ||   ||
+| velocityCurve || {} ||
-uncertain as to how exactly this works, but appears to control the degree of acceleration at particular velocities.  uses a 4 part key, the first part of the key is definitely specific accelerations, the second part is percentage of velocities.
+Control the degree of acceleration of an engine at specified speeds. It uses keys to generate a curve of the amount of thrust generated by the engine according to the speed of the craft. First part of the key is speed in m/s and then comes the thrust multiplier ( the effective thrust will be : maxThrust * multiplier). Used stock by jet engines.
-<nowiki>
- {
-  key = 0 0.5 0 0
-  key = 1000 1 0 0
-  key = 2000 0.5 0 0
-  key = 2400 0 0 0
- }
-</nowiki>
-<nowiki>
- {
-  key = 1000 0 0 0
-  key = 850 0.2 0 0
-  key = 0 1 0 0
- }
-</nowiki>
 |}
@@ Line 768: / Line 1,009: @@
 |
 === ModuleEnginesFX ===
+An updated and more customizable version of ModuleEngines.  Required for and allows implementation of multi-modal engines and engines with custom exhaust FX.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 781: / Line 1,023: @@
 ||
 * running_closed
-|| state of the engine
+|| effect used for when the engine is running
 |-
 | thrustVectorTransformName
@@ Line 788: / Line 1,030: @@
 * obj_gimbal
 ||
-unknown purpose.
+specifies gameObject to be used as point of applied thrust, force is applied in local +Z. standard name is thrustTransform, but it can be anything as long as gameObject in the MU matches thrustVectorTransformName value in module config
 |-
 | exhaustDamage ||
@@ Line 806: / Line 1,048: @@
 * 0.1
 * 0.05
-|| appears to not be used.  Suggests a minimum thrust output value, below which the engine will no longer operate.  Typical values are 0.1 (10%)
+|| minimum required resource(s) for engine to start. If engine has less than specified value in resource(s), it will not start. Think of it as if your car needs at least half full tank to start.
 |-
 | minThrust
@@ Line 904: / Line 1,146: @@
 === ModuleEnviroSensor ===
+Environmental sensor definitions.  Specifies that this part is one of these types of sensors.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 927: / Line 1,170: @@
 === ModuleGenerator ===
+Generators and Alternators serve must the same purpose, but generators are not linked to the percentage of thrust output of an engine, they simply produce.  Some cannot be shut off.  A generator may produce any available resource.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 972: / Line 1,216: @@
 === ModuleGimbal ===
+Gimballing represents an engine-bells ability to move around in relation to the engine body, provided a degree of ability to steer the vessel.  Higher numbers indicate a higher range, but don't set it too high.  Strange things will happen.  Recommend limiting range to .90 at the absolute maximum.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 1,003: / Line 1,248: @@
 === ModuleGrappleNode ===
+Added in [0.90], specifically for the KASA asteroid capture missions, this part functions much like a dockingNode, however, it does not require a matching docking node on the capture-side.  Grapplers can attach to anything (as far as we know).
 {|class="wikitable"
 ! variable !! sample !! definition
@@ Line 1,116: / Line 1,362: @@
 === ModuleLandingGear ===
+Specifies that the part is a landing gear, implying a wheel, and the traits of that wheel.  Hopefully being deprecated in favor of [[Module#ModuleWheel|moduleWheel]] below.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 1,142: / Line 1,389: @@
 === ModuleLandingLeg ===
+Specifies that this part is a landing leg and describes compression and resistance factors for the part.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 1,229: / Line 1,477: @@
 === ModuleLight ===
+Specifies that this part is a light source, and how that light is produced and directed.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 1,290: / Line 1,539: @@
 === ModuleParachute ===
+specifies that this part is a parachute and describes the operational parameters for parachute operations.  Includes default settings for opening height and deployment atmospheric conditions.
 {|class="wikitable"
 |-
@@ Line 1,372: / Line 1,622: @@
 === ModuleRCS ===
+Specifies that this is a Reaction Control System part.  Uses variable resources to control directionality of the spacecraft.  Unlike engines, RCS parts are generally oriented perpendicular to all directions of a spacecraft in order to provide steering, rather than thrust.  Typically, monopropellant is decompressively expelled from an RCS port to push the spacecraft in one direction.
 Note:  ModuleRCS can use either a single resource, or a series of PROPELLANT calls.
 {|class="wikitable"
@@ Line 1,467: / Line 1,718: @@
 === ModuleReactionWheel ===
+Specifies that this part contains reaction wheels, used to stabilize the directionality of a spacecraft.  Typically used for stability, rather than producing change, both are possible.  If you're thinking that this does the same thing as RCS, you wouldn't be far off.
 {|class="wikitable"
 ! variable !! example !! definition
@@ Line 1,518: / Line 1,770: @@
 |
-=== ModuleResourceIntake ===
+=== ModuleResourceConverter ===
-Used to create a part that produces a resource.
+Used to create a part that convertes resources.
 {|class="wikitable"
 |-
 ! variable !! example !! definition
 |-
-| resourceName ||
+| ConverterName ||
-*IntakeAir
+* Lf+Ox
+||
+Name displayed when right-clicking the part.
+|-
+| StartActionName ||
+* Start ISRU [Lf+Ox]
+||
+Text displayed for the start action.
+|-
+| StopActionName ||
+* Stop ISRU [Lf+Ox]
 ||
-defines the type of resource produced by this module.  Any resource may be used for this purpose, including those not defined at all
+Text displayed for the stop action.
 |-
-| checkForOxygen ||
+| AutoShutdown ||
 * true
 * false
 ||
-An optional method that specifies this module must check to see if oxygen/atmosphere is present whenever attempting to generate the requested resource.
+Automatically shut the converter down if part is overheating?
 |-
-| area ||
+| TemperatureModifier ||
-* 0.004
+* Temperature modifier defintion
+||
+Unknown. Floatpoint curve.
+|-
+| GeneratesHeat ||
+* true
+* false
 ||
-area is the amount of space used for determining how much resource to produce.  The larger the number, the more of the resource is produced per second.
+If set to true the converter operation will generate heat.
 |-
-| intakeSpeed ||
+| DefaultShutoffTemp ||
-* 10
+* .8
 ||
-unknown.  Assumed to be a minimum m/s measure to determine if this module operates or not.
+Unknown. Related to AutoShutdown. Assumed to be unrelated to Core Temp.
 |-
-| intakeTransformName ||
+| ThermalEfficiency ||
-* Intake
+* Thermal efficiency definition
 ||
-unknown.
+Efficiency related to part temperature. Floatpoint curve.
+|-
+| UseSpecialistBonus ||
+* true
+* false
+||
+If set to true the converter will use specialist bonus. Efficiency = EB * [SBB + (SEF * EE)]. EE = 0-6
+|-
+| SpecialistEfficiencyFactor ||
+* 0.2
+||
+SEF. Sets the amount each specialist-level adds to the efficiency.
+|-
+| SpecialistBonusBase ||
+* 0.05
+||
+SBB. Base efficiency a converter can reach without any specialist if EB = 1.
+|-
+| ExperienceEffect ||
+* ConverterSkill
+||
+EE. NoSpecialist=0; ZeroStarSpecialist=1; OneStarSpecialist=2; FiveStarSpecialist=6
+|-
+| EfficiencyBonus ||
+* 1
+||
+EB. Final multiplier for efficiency. Tipp: start with EB = 1 and adjust if required.
+|-
+| INPUT_RESOURCE ||
+* Resource defintion
+||
+Defines the resource consumed when the converter is active. Can have multiple INPUT_RESOURCE definitions.
+|-
+| OUTPUT_RESOURCE ||
+* Resource defintion
+||
+Defines the resource produced when the converter is active. Can have multiple OUTPUT_RESOURCE definitions.
 |}
 |
@@ Line 1,554: / Line 1,858: @@
 MODULE
 {
-  name = ModuleResourceIntake
+ name = ModuleResourceConverter
-  resourceName = IntakeAir
+ ConverterName = Lf+Ox
-  checkForOxygen = true
+ StartActionName = Start ISRU [Lf+Ox]
-  area = 0.006
+ StopActionName = Stop ISRU [Lf+Ox]
-  intakeSpeed = 10
+ AutoShutdown = true
-  intakeTransformName = Intake
+ TemperatureModifier
+ {
+ 	key = 0 100000
+ 	key = 750 50000
+ 	key = 1000 10000
+ 	key = 1250 500
+ 	key = 2000 50
+ 	key = 4000 0
+ }
+ GeneratesHeat = true
+ DefaultShutoffTemp = .8
+ ThermalEfficiency
+ {
+ 	key = 0 0 0 0
+ 	key = 500 0.1 0 0
+ 	key = 1000 1.0 0 0
+ 	key = 1250 0.1 0 0
+ 	key = 3000 0 0 0
+ }
+ UseSpecialistBonus = true
+ SpecialistEfficiencyFactor = 0.2
+ SpecialistBonusBase = 0.05
+ ExperienceEffect = ConverterSkill
+ EfficiencyBonus = 1
+ INPUT_RESOURCE
+ {
+ 	ResourceName = Ore
+ 	Ratio = 0.5
+ 	FlowMode = STAGE_PRIORITY_FLOW
+ }
+ INPUT_RESOURCE
+ {
+ 	ResourceName = ElectricCharge
+ 	Ratio = 30
+ }
+ OUTPUT_RESOURCE
+ {
+ 	ResourceName = LiquidFuel
+ 	Ratio = 0.45
+ 	DumpExcess = false
+ 	FlowMode = STAGE_PRIORITY_FLOW
+ }
+ OUTPUT_RESOURCE
+ {
+ 	ResourceName = Oxidizer
+ 	Ratio = 0.55
+ 	DumpExcess = false
+ 	FlowMode = STAGE_PRIORITY_FLOW
+  }
 }
 </pre>
@@ Line 1,566: / Line 1,918: @@
 |
-=== ModuleSAS ===
+=== ModuleResourceHarvester ===
-no known parameters.  Possibly used a reference to determine whether this part is activated by the SAS function of the interface.  ie. when you turn on SAS, turn on this part.  NOTE:  [0.90] added SASServiceLevel (0-3)
+Used to create a part that harvestes resources from the environment.
-||
+{|class="wikitable"
-<pre>
-MODULE
-{
- name = ModuleSAS
- SASServiceLevel = 1
-}
-</pre>
 |-
-|
+! variable !! example !! definition
-=== ModuleScienceContainer ===
-{|class="wikitable"
-! variable !! example !! definition
 |-
+| HarvesterType ||
+* 0
+* 1
+* 2
+* 3
+||
+Defines the type of harvester.
+* 0 = Planetary use
+* 1 = Oceanic use
+* 2 = Atmospheric use
+* 3 = Vacuum use?
+Harvester types other then 0 require use of a deploy animation before they can be activated (tested with KSP version 1.1.3).
 |-
-| reviewActionName ||   ||
+| Efficiency ||
-Flavor text for reviewing the data contained in a science container.
+* 1
+||
+Harvester efficiency. Seems to work differently depending on harvester type.
 |-
-| storeActionName ||   ||
+| ResourceName ||
-Flavor text for placing data into a science container.
+* Ore
+||
+Resource to harvest.
 |-
-| collectActionName ||   ||
+| ConverterName ||
-Flavor text for removing data from a science container.
+* Surface Harvester
+||
+Name displayed when right-clicking the part.
 |-
-| evaOnlyStorage ||   ||
+| StartActionName ||
-Boolean, True or False
+* Start Surface Harvester
-Specifies whether or not data storage is restricted to EVA activities.
+||
+Text displayed for the start action.
 |-
-| storageRange ||   ||
+| StopActionName ||
-Distance, expressed in meters, a Kerbal must be within in order to interact with data and this container.
+* Stop Surface Harvester
+||
+Text displayed for the stop action.
 |-
-| allowRepeatedSubjects ||   ||
+| ToggleActionName ||
-Boolean, True or False
+* Toggle Surface Harvester
-|}
+||
-||
+Text displayed for the toggle action.
-<pre>
-MODULE
-{
- name = ModuleScienceContainer
- reviewActionName = Review Stored Data
- storeActionName = Store Experiments
- evaOnlyStorage = True
- storageRange = 4.0
-}
-</pre>
 |-
-|
+| ImpactTransform ||
-=== ModuleScienceExperiment ===
+* ImpactTransform
-{|class="wikitable"
+||
-! variable !! example !! definition
+Seems to be only relevant for surface harvesters. Resource is only harvested when in contact to the ground. Further details of this parameter are unknown.
 |-
-| experimentID ||   ||
+| ImpactRange ||
-* atmosphereAnalysis
+* 5
-* mysteryGoo
+||
-* crewReport
+Seems to be only relevant for surface harvesters. May be the distance between where the drillhead is when it is deployed and where the actual part is. Further details of this parameter are unknown.
-* seismicScan
-* barometerScan
 |-
-| experimentActionName ||   ||
+| AutoShutdown ||
-Flavor text for contextual menu to describe to the player what the part does when collecting data
+* true
+* false
+||
+If set to true the harvester will automatically shut off if it overheats.
 |-
-| resetActionName ||   ||
+| GeneratesHeat ||
-Flavor text for contextual menu to describe to the player what the part does when collecting data
+* true
+* false
+||
+If set to true the harvester operation will generate heat.
 |-
-| reviewActionName ||   ||
+| UseSpecialistBonus ||
-Flavor text for contextual menu to describe to the player what the part does when collecting data
+* true
+* false
+||
+If set to true crew members can give a bonus to harvester efficiency.
 |-
-| useStaging ||   ||
+| SpecialistEfficiencyFactor ||
-Boolean True/False - speficies whether this module can be activated through the normal staging system
+* 0.2
+||
+Efficieny bonus multiplier based on the number of specialists and their skill.
 |-
-| useActionGroups ||   ||
+| SpecialistBonusBase ||
-Boolean True/False - specifies whether this module can be activated by an Action Group
+* 0.05
+||
+Efficieny bonus base amount for each specialist of the given type.
 |-
-| hideUIwhenUnavailable ||   ||
+| Specialty ||
-Boolean True/False - specifies whether this module will show its activation buttons through the contextual menu, even if it is not available
+* Engineer
+||
+Type of specialist required to get the efficiency bonus.
 |-
-| rerunnable ||   ||
+| EfficiencyBonus ||
-Boolean True/False.  Defaults to false.
+* 1
+||
+Added efficiency for having a specialist.
 |-
-| xmitDataScalar ||   ||
+| INPUT_RESOURCE ||
-.35
+* Resource defintion
+||
+Defines the resource consumed when the harvester is active. Can have multiple INPUT_RESOURCE definitions.
 |-
-| FxModules ||   ||
+| TemperatureModifier ||
-(gooExperiment)
+* Temperature modifier defintion
+||
+Unknown.
 |-
-| dataIsCollectable ||   ||
+| ThermalEfficiency ||
-Boolean True/False
+* Thermal efficiency definition
-|-
+||
-| collectActionName ||   ||
+Efficiency related to part temperature.
-Flavor text
-|-
-| interactionRange ||   ||
-The range, expressed in meters, from which a Kerbal on EVA can interact with this module (for example to reset the experiment)
 |}
+|
-||
 <pre>
 MODULE
 {
- name = ModuleScienceExperiment
+  name = ModuleResourceHarvester
+  HarvesterType = 0
- experimentID = atmosphereAnalysis
+  Efficiency = 1.5
+  ResourceName = Ore
- experimentActionName = Run Atmosphere Analysis
+  ConverterName = Surface Harvester
- resetActionName = Discard Data
+  StartActionName = Start Surface Harvester
- reviewActionName = Review Data
+  StopActionName = Stop Surface Harvester
+  ToggleActionName = Toggle Surface Harvester
- useStaging = False
+  ImpactTransform = ImpactTransform
- useActionGroups = True
+  ImpactRange = 5
- hideUIwhenUnavailable = True
+  AutoShutdown = true
- rerunnable = True
+  GeneratesHeat = true
+   UseSpecialistBonus = true
- xmitDataScalar = 0.35
+  SpecialistEfficiencyFactor = 0.2
+  SpecialistBonusBase = 0.05
- dataIsCollectable = True
+  Specialty = Engineer
- collectActionName = Download Data
+  EfficiencyBonus = 1
- interactionRange = 1.2
+  INPUT_RESOURCE
+  {
+    ResourceName = ElectricCharge
+    Ratio = 15
+  }
+  TemperatureModifier
+   {
+    key = 0 10000
+    key = 250 7500
+    key = 500 5000
+    key = 750 500
+    key = 1000 0
+  }
+  ThermalEfficiency
+  {
+    key = 0 0.1
+    key = 250 .1
+    key = 500 1
+    key = 750 .1
+    key = 1000 0
+  }
 }
 </pre>
+|
 |-
 |
-=== ModuleScienceLab ===
+=== ModuleResourceIntake ===
+Used to create a part that produces a resource based on interaction with the environment.
 {|class="wikitable"
+|-
 ! variable !! example !! definition
 |-
+| resourceName ||
+*IntakeAir
+||
+defines the type of resource produced by this module.  Any resource may be used for this purpose, including those not defined at all
 |-
-| containerModuleIndex ||   ||
+| checkForOxygen ||
-numerical, 0
+* true
-|-
+* false
-| dataTransmissionBoost ||   ||
+||
-numerical, 1.5
+An optional method that specifies this module must check to see if oxygen/atmosphere is present whenever attempting to generate the requested resource.
-|-
-| crewsRequired ||   ||
-numerical, 2
 |-
-| canResetConnectedModules ||   ||
+| area ||
-Boolean, True or False
+* 0.004
+||
+area is the amount of space used for determining how much resource to produce.  The larger the number, the more of the resource is produced per second.
 |-
-| canResetNearbyModules ||   ||
+| intakeSpeed ||
-Boolean, True or False
+* 10
+||
+unknown.  Assumed to be a minimum m/s measure to determine if this module operates or not.
 |-
-| interactRange ||   ||
+| intakeTransformName ||
-numerical, possible integers only, 5
+* Intake
-|-
+||
-| REOURCE_PROCESS ||   ||
+unknown.
-|-
-| name || ||
-names the resource required, e.g.: ElectricCharge
-|-
-| amount || ||
-specified, numerical, the number of units of the specified resource expended
 |}
-||
+|
 <pre>
 MODULE
 {
- name = ModuleScienceLab
+  name = ModuleResourceIntake
+  resourceName = IntakeAir
- containerModuleIndex = 0
+  checkForOxygen = true
- dataTransmissionBoost = 1.15
+  area = 0.006
- crewsRequired = 2
+   intakeSpeed = 10
+   intakeTransformName = Intake
- canResetConnectedModules = True
- canResetNearbyModules = True
- interactionRange = 5
- RESOURCE_PROCESS
- {
-   name = ElectricCharge
-   amount = 10
-  }
 }
 </pre>
+|
 |-
 |
-=== ModuleSteering ===
+=== ModuleSAS ===
+Used as a reference to determine whether this part is activated by the SAS function of the interface.  ie. when you turn on SAS, turn on this part.  NOTE:  [0.90] added SASServiceLevel (0-3)
 {|class="wikitable"
 ! variable !! example !! definition
 |-
-| controlAxisType || Forward  ||  Unsure.  May have something to do with directional control
+| SASServiceLevel ||
+* 0
+* 1
+* 2
+* 3
+|| defines the required level of building development for each different SAS capabilities (markers on the nav ball)
 |-
-| steeringAxis ||
+|}
-* 0, 0, 1
+||
-|| specifies the 3-dimensional axis of steering control.
+<pre>
+MODULE
+{
+ name = ModuleSAS
+ SASServiceLevel = 1
+}
+</pre>
 |-
-| steeringTransformName || Steering  ||  unknown
+|
-|-
-| steeringLocked ||
+=== ModuleScienceContainer ===
-* true
+A place to store the results of a science experiment.
-* false
+{|class="wikitable"
-|| specifies whether the part's steering starts locked
+! variable !! example !! definition
+|-
+|-
+| reviewActionName || Flavor Text || for reviewing the data contained in a science container.
 |-
-| steeringCurve ||
+| storeActionName || Flavor text || for placing data into a science container.
-{|
-|
 |-
-| 0 || 16
+| collectActionName || Flavor text || for removing data from a science container.
 |-
-| 10 || 9
+| evaOnlyStorage ||
+* True
+* False
+||
+Specifies whether or not data storage is restricted to EVA activities.
 |-
-| 30 || 2
+| storageRange ||
+* 0.5
+||
+Distance, expressed in meters, a Kerbal must be within in order to interact with data and this container.
 |-
-| 100 || 1
+| allowRepeatedSubjects ||
-|}
+* True
-|| multi-array of keys,
+* False
+|| Uncertain
 |}
 ||
 <pre>
 MODULE
 {
-  name = ModuleSteering
+  name = ModuleScienceContainer
-  controlAxisType = Forward
-  steeringAxis = 0, 0, 1
+  reviewActionName = Review Stored Data
-  steeringTransformName = Steering
+  storeActionName = Store Experiments
-  steeringLocked = true
+  evaOnlyStorage = True
-  steeringCurve
+  storageRange = 4.0
-  {
-     key = 0 16
-  key = 10 9
-    key = 30 2
-  key = 100 1
-  }
 }
 </pre>
@@ Line 1,801: / Line 2,194: @@
 |
-=== ModuleTestSubject ===
+=== ModuleScienceExperiment ===
-Used for the contract system, determines atmospheric conditions under which this part may be considered for testing.  Also specifies whether the part is able to be tested using the Staging process or must be manually selected and "Perform Test" used to satisfy contract requirements.
+A place to conduct a science experiment.
 {|class="wikitable"
+! variable !! example !! definition
+|-
+| experimentID ||
+*evaReport
+*mysteryGoo
+*surfaceSample
+*mobileMaterialsLab
+*temperatureScan
+*barometerScan
+*seismicScan
+*gravityScan
+*atmosphereAnalysis
+*asteroidSample
+|| This refers to the Experiment IDs listed in ScienceDefs.cfg under each EXPERIMENT_DEFINITION{}
+|-
+| experimentActionName || Flavor text   ||
+for contextual menu to describe to the player what the part does when collecting data
+|-
+| resetActionName || Flavor text   ||
+for contextual menu to describe to the player what the part does when collecting data
 |-
-! variable !! example !! definition
+| reviewActionName || Flavor text   ||
+for contextual menu to describe to the player what the part does when collecting data
 |-
-| environments ||
+| useStaging ||
-* 15
+* True
-* 1
+* False
-||
+|| specifies whether this module can be activated through the normal staging system
-A single numerical value, between 0 (nowhere) and 15 (anywhere), that specifies the atmospheric conditions the part may be tested under.  Add numbers together to specify multiple environments
-* 0 = nowhere
-* 1 = the surface of; srf
-* 2 = the ocean of; ocean
-* 3 = the surface or ocean of; srf, ocean
-* 4 = the atmosphere of; atmo
-* 5 = the surface or atmosphere of; srf, atmo
-* 6 = the ocean or atmosphere of; ocean, atmo
-* 7 = the surface, ocean or atmosphere of; srf, ocean, atmo
-* 8 = the space above; space
-* 9 = the surface or space above; srf, space
-* 10 = the ocean or space of; srf, ocean, space
-* 11 = the surface, ocean or space of; srf, ocean, space
-* 12 = the space or atmosphere of; atmo, space
-* 13 = the surface, space or atmosphere of; srf, atmo, space
-* 14 = the ocean, space, or atmosphere of; ocean, atmo, space
-* 15 = anywhere; srf, ocean, atmo, space
 |-
-| useStaging ||
+| useActionGroups ||
 * True
 * False
-|| specifies whether the part can be tested using the Staging Process
+|| specifies whether this module can be activated by an Action Group
 |-
-| useEvent ||
+| hideUIwhenUnavailable ||
 * True
 * False
-|| specifies whether the part can be tested using the "Perform Test" action.
+|| specifies whether this module will show its activation buttons through the contextual menu, even if it is not available
-|}
-||
-<pre>
-MODULE
-{
-name = ModuleTestSubject
-// nowhere: 0, srf: 1, ocean: 2, atmo: 4, space: 8
-environments = 15
-useStaging = False
-useEvent = True
-}
-</pre>
 |-
-|
+| rerunnable ||
+* True
-=== ModuleWheel ===
+* '''False'''
-{|class="wikitable"
+|| specifies whether this experiment can be rerun.
-! variable !! example !! definition
 |-
-| hasMotor ||
+| xmitDataScalar ||
-* true
+* 0.35
-* false
+|| Specifies the share of science data that can be recovered via the antenna. In this example 35% can be recovered.
-|| specifies whether the wheel has a powered propulsion system
 |-
-| resourceName ||
+| FxModules ||
-* ElectricCharge
+* 0
-|| specifies the resource(s) used by powered propulsion system
+|| The index of the module, starting from 0, playing the animation, if any, for this science instrument. The module must implement IScalarModule so must be ModuleAnimateGeneric or a descendant.
 |-
-| resourceConsumptionRate ||
+| dataIsCollectable ||
-* 1.0
+* True
-|| specifies the rate of consumption of resources for the powered propulsion system in units/second
+* False
+|| Uncertain.  Presumed to indicate whether a Kerbal on EVA can retrieve data from this experiment
 |-
-| canSteer ||
+| collectActionName || Flavor text || If data is collectible, this is the flavor text for collecting that data
-* true
-* false
-|| specifies whether this wheel is steerable
 |-
-| controlAxisType ||
+| interactionRange ||
-* Forward
+* 0.5
-|| If steerable, specifies the axis type
+|| The range, expressed in meters, from which a Kerbal on EVA can interact with this module (for example to reset the experiment)
 |-
-| steeringModeType ||
+| usageReqMaskInternal || (ExperimentUsageReqs) || How the experiment can be triggered by the parent Vessel.
-* AutomaticSteer
-* TankSteer
-|| uncertain: may refer to rack-and-pinion versus Track-type steering
 |-
-| brakeTorque || 300 || the dV (in m/s) of torque applied when using the breaks
+| usageReqMaskExternal || (ExperimentUsageReqs) || How the experiment can be triggered by EVA Kerbals.
+|}
+ExperimentUsageReqs
+{|class="wikitable"
 |-
-| brakeSpeed || 1.2 || the dV (in m/s) that braking will slow the vehicle under optimum conditions
+! Name !! Value !! Notes
 |-
-| impactTolerance || 2000  || dV that this part can withstand before breaking
+| Never || -1 || Experiment can't be used at all
 |-
-| overSpeedDamage || 60 || uncertain.  possibly reserved for future use, possible that this is the amount of dV of damage applied to this part whenever it exceeds it's rated speed
+| Always || 0 || Experiment can always be used
 |-
-| WHEEL ||   ||
+| VesselControl || 1 || Experiment can be used if vessel is  (see ExperimentUsageReqs)under control (probe or crew)
 |-
-| wheelName || ||
+| CrewInVessel || 2 || Experiment can only be used if vessel is crewed.
-wheel
 |-
-| wheelColliderName || ||
+| CrewInPart || 4 || Experiment can only be used if part contains crew.
-wheelCollider
 |-
-| suspensionTransformName || ||
+| ScientistCrew || 8 || Experiment can only be used if crew is scientist.
-suspensionTraverse
+|}
+||
+<pre>
+MODULE
+{
+ name = ModuleScienceExperiment
+ experimentID = atmosphereAnalysis
+ experimentActionName = Run Atmosphere Analysis
+ resetActionName = Discard Data
+ reviewActionName = Review Data
+ useStaging = False
+ useActionGroups = True
+ hideUIwhenUnavailable = True
+ rerunnable = True
+ xmitDataScalar = 0.35
+ dataIsCollectable = True
+ collectActionName = Download Data
+ interactionRange = 1.2
+}
+</pre>
 |-
-| suspensionNeutralPointName || ||
+|
-suspensionNeutralPoint
+=== ModuleScienceLab ===
+A place to modify a science experiment prior to transmission in order to gain more research points from it.
+{|class="wikitable"
+! variable !! example !! definition
 |-
-| damagedObjectName || ||
-bustedwheel
 |-
-| rotateX || ||
+| containerModuleIndex ||
+* 0
+|| Specifies ModuleScienceContainer location in order in cfg file. 0 is first module listing, 1 is two and so on.
 |-
-| rotateY || ||
+| dataTransmissionBoost ||
+* 1.5
+|| Unknown
 |-
-| rotateZ || ||
+| crewsRequired ||
+* 2
+|| Minimum number of Kerbals in the part needed to operate this module
 |-
-| steeringCurve ||   ||
+| canResetConnectedModules ||
-keys, 0 16
+* True
-9
+* False
-2
+|| Unknown.  Presumed to indicate whether modules attached to this part can be reset from this module
+|-
+| canResetNearbyModules ||
+* True
+* False
+||   Presumed to indicate whether modules attached to this vessel can be reset from this module
+|-
+| interactRange ||
+* 1.2
+|| Limit of range (in meters) that modules attached to this vessel can be reset.  Uncertain.
+|-
+| REOURCE_PROCESS || {} ||
+|-
+| name ||
+* ElectricCharge
+|| names the resource required, e.g.: ElectricCharge
 |-
-| torqueCurve ||   ||
+| amount ||
-keys
+* 10
-250 0 0
+||
-100 0 0
+specified, numerical, the number of units of the specified resource expended
-14 0 0
-0 0 0
 |}
+||
-||
 <pre>
 MODULE
 {
-	name = ModuleWheel
+ name = ModuleScienceLab
-	hasMotor = true
-	resourceName = ElectricCharge
+ containerModuleIndex = 0
-        resourceConsumptionRate = 0.5
+ dataTransmissionBoost = 1.15
-	canSteer = true
+ crewsRequired = 2
-	controlAxisType = Forward
-	steeringModeType = AutomaticSteer
+ canResetConnectedModules = True
-	brakeTorque = 180
+ canResetNearbyModules = True
-	brakeSpeed = 1.0
+ interactionRange = 5
-	impactTolerance = 65
-	overSpeedDamage = 20
+ RESOURCE_PROCESS
+ {
+  name = ElectricCharge
+  amount = 10
+ }
+}
+</pre>
+|-
+|
-	WHEEL
+=== ModuleSteering ===
-	{
+Specifies that this part is steerable and provides the axis and animation information for steering the part.
-	    wheelName = wheel
+{|class="wikitable"
-	    wheelColliderName = wheelCollider
+! variable !! example !! definition
-	    suspensionTransformName = suspensionTraverse
+|-
-	    suspensionNeutralPointName = suspensionNeutralPoint
+| controlAxisType ||
-	    damagedObjectName = bustedwheel
+* Forward
-	    rotateX = 0
+||  Unsure.  May have something to do with directional control
-	    rotateY = 1
+|-
-	    rotateZ = 0
+| steeringAxis ||
-	}
+* 0, 0, 1
+|| specifies the 3-dimensional axis of steering control.
-	steeringCurve
- 	{
-   	 key = 0 18
-	 key = 15 6
- 	}
-	torqueCurve
-	{
-	  key = 0 170 0 0
-	  key = 2.5 100 0 0
-	  key = 12 0 0 0
-	}
-}</pre>
-|-
-|
-=== RetractableLadder ===
-{|class="wikitable"
-! variable !! example !! definition
 |-
+| steeringTransformName ||
+* Steering
+||  unknown
 |-
-| ladderAnimationRootName ||
+| steeringLocked ||
-* TelusBay
+* true
-* Telescopic ladder
+* false
-|| name of the beginning animation for this module
+|| specifies whether the part's steering starts locked
+|-
+| steeringCurve ||
+{|
+|
+|-
+| 0 || 16
+|-
+| 10 || 9
 |-
-| ladderColliderName ||
+| 30 || 2
-* ladderCollider
-|| name of the collider mesh for this module
 |-
-| ladderRetractAnimationName ||
+| 100 || 1
+|}
+|| multi-array of keys,
+|}
+||
+<pre>
+MODULE
+{
+ name = ModuleSteering
+ controlAxisType = Forward
+ steeringAxis = 0, 0, 1
+ steeringTransformName = Steering
+ steeringLocked = true
+ steeringCurve
+  {
+     key = 0 16
+  key = 10 9
+    key = 30 2
+  key = 100 1
+  }
+}
+</pre>
+|-
+|
+=== ModuleTestSubject ===
+Used for the contract system, determines atmospheric conditions under which this part may be considered for testing.  Also specifies whether the part is able to be tested using the Staging process or must be manually selected and "Perform Test" used to satisfy contract requirements.
+{|class="wikitable"
+|-
+! variable !! example !! definition
+|-
+| environments (Deprecated. Use situationMask instead) ||
+* 15
+* 1
+||
+A single numerical value, between 0 (nowhere) and 15 (anywhere), that specifies the atmospheric conditions the part may be tested under.  Add numbers together to specify multiple environments
+* 0 = nowhere
+* 1 = the surface of; srf
+* 2 = the ocean of; ocean
+* 3 = the surface or ocean of; srf, ocean
+* 4 = the atmosphere of; atmo
+* 5 = the surface or atmosphere of; srf, atmo
+* 6 = the ocean or atmosphere of; ocean, atmo
+* 7 = the surface, ocean or atmosphere of; srf, ocean, atmo
+* 8 = the space above; space
+* 9 = the surface or space above; srf, space
+* 10 = the ocean or space of; srf, ocean, space
+* 11 = the surface, ocean or space of; srf, ocean, space
+* 12 = the space or atmosphere of; atmo, space
+* 13 = the surface, space or atmosphere of; srf, atmo, space
+* 14 = the ocean, space, or atmosphere of; ocean, atmo, space
+* 15 = anywhere; srf, ocean, atmo, space
+|-
+| useStaging ||
+* True
+* False
+|| specifies whether the part can be tested using the Staging Process
+|-
+| useEvent ||
+* True
+* False
+|| specifies whether the part can be tested using the "Perform Test" action.
+|-
+| situationMask ||
+* 16
+* 63
+||
+A binary mask for defining the situation.
+* SrfLanded = 1,
+* SrfSplashed = 2,
+* FlyingLow = 4,
+* FlyingHigh = 8,
+* InSpaceLow = 16,
+* InSpaceHigh = 32
+* Hidden Flag (not sure what this does, but several engine cfgs have a 7th flag tripped, value equaling 127) = 64
+|-
+| CONSTRAINT ||
+{<br />
+type = REPEATABILITY<br />
+value = ALWAYS<br />
+prestige = Trivial<br />
+}<br />
+<br />
+<br />
+{<br />
+type = ALTITUDEENV<br />
+test = LT<br />
+value = 1000<br />
+situationMask = 8<br />
+prestige = Trivial<br />
+}<br />
+||
+Constraints define different attributes of a test.
+<br /><br />
+type - The type of constraint. Can have values such as :<br />
+* SPEED
+* SPEEDENV
+* ALTITUDE
+* ALTITUDEENV
+* DENSITY
+* DYNAMICPRESSURE
+* OXYGEN
+* ATMOSPHERE
+* SITUATION
+* REPEATABILITY
+<br />
+test -  An optional parameter. Relevant when type ''isn't'' set to 'REPEATABILITY'. Can have values such as:<br />
+* GT
+* LT
+* EQ
+* NEQ
+<br />
+value -  Defines whether or not this test can be repeated. Can have values such as:<br />
+* ALWAYS
+* BODYANDSITUATION
+* ONCEPERPART
+<br />
+prestige -  Defines the prestige level for the test. Can have values such as:<br />
+* Trivial
+* Significant
+* Exceptional
+<br />
+body -  Defines what celestial body can be used for the test . Can have values such as:<br />
+* _NotHome (disables every flag but Kerbin)
+* _NotSun (unclear what this does, but might disable every celestial body but Kerbol?)
+<br />
+situationMask -  Overrides the situationMask value for this constraint only:<br />
+* SrfLanded = 1,
+* SrfSplashed = 2,
+* FlyingLow = 4,
+* FlyingHigh = 8,
+* InSpaceLow = 16,
+* InSpaceHigh = 32
+|}
+||<pre>
+       MODULE
+	{
+		name = ModuleTestSubject
+		useStaging = True
+		useEvent = True
+		situationMask = 60
+		CONSTRAINT
+		{
+			// disable all but home
+			type = SITUATION
+			value = 0
+			body = _NotHome
+			prestige = Trivial
+		}
+		CONSTRAINT
+		{
+			// disable all but home
+			type = SITUATION
+			value = 0
+			body = _NotHome
+			prestige = Significant
+		}
+		CONSTRAINT
+		{
+			type = REPEATABILITY
+			value = ALWAYS
+			prestige = Trivial
+		}
+		CONSTRAINT
+		{
+			type = REPEATABILITY
+			value = BODYANDSITUATION
+			prestige = Significant
+		}
+		CONSTRAINT
+		{
+			type = REPEATABILITY
+			value = ONCEPERPART
+			prestige = Exceptional
+		}
+		CONSTRAINT
+		{
+			type = ALTITUDEENV
+			test = GT
+			value = 4000
+			prestige = Trivial
+		}
+		CONSTRAINT
+		{
+			type = ALTITUDEENV
+			test = LT
+			value = 8000
+			prestige = Trivial
+		}
+		CONSTRAINT
+		{
+			type = ALTITUDEENV
+			test = GT
+			value = 2000
+			prestige = Significant
+		}
+		CONSTRAINT
+		{
+			type = ALTITUDEENV
+			test = LT
+			value = 4000
+			prestige = Significant
+		}
+		CONSTRAINT
+		{
+			type = ALTITUDEENV
+			test = GT
+			value = 1000
+			prestige = Exceptional
+		}
+		CONSTRAINT
+		{
+			type = ALTITUDEENV
+			test = LT
+			value = 2000
+			prestige = Exceptional
+		}
+		CONSTRAINT
+		{
+			type = ALTITUDE
+			test = GT
+			value = 0 // this just registers altitude as something to care about
+			situationMask = 8
+		}
+		CONSTRAINT
+		{
+			type = ALTITUDE
+			test = LT
+			value = 300000
+			situationMask = 16
+			body = _NotSun
+		}
+		CONSTRAINT
+		{
+			type = ALTITUDE
+			test = LT
+			value = 600000
+			situationMask = 32
+			body = _NotSun
+		}
+		CONSTRAINT
+		{
+			type = SPEED
+			test = GT
+			value = 0
+			situationMask = 8
+			prestige = Trivial
+		}
+		CONSTRAINT
+		{
+			type = SPEED
+			test = LT
+			value = 600
+			situationMask = 8
+			prestige = Trivial
+		}
+		CONSTRAINT
+		{
+			type = SPEED
+			test = GT
+			value = 0
+			situationMask = 8
+			prestige = Significant
+		}
+		CONSTRAINT
+		{
+			type = SPEED
+			test = LT
+			value = 900
+			situationMask = 8
+			prestige = Significant
+		}
+		CONSTRAINT
+		{
+			type = SPEED
+			test = GT
+			value = 300
+			situationMask = 8
+			prestige = Exceptional
+		}
+		CONSTRAINT
+		{
+			type = SPEED
+			test = LT
+			value = 1200
+			situationMask = 8
+			prestige = Exceptional
+		}
+		CONSTRAINT
+		{
+			type = SPEEDENV
+			test = LT
+			value = 200
+			prestige = Trivial
+		}
+	}</pre>
+|-
+|
+=== ModuleWheel ===
+The better version of landingGear, with lots more options for the operation of wheels, including adding power, steering, and damage information.
+{|class="wikitable"
+! variable !! example !! definition
+|-
+| hasMotor ||
+* true
+* false
+|| specifies whether the wheel has a powered propulsion system
+|-
+| resourceName ||
+* ElectricCharge
+|| specifies the resource(s) used by powered propulsion system
+|-
+| resourceConsumptionRate ||
+* 1.0
+|| specifies the rate of consumption of resources for the powered propulsion system in units/second
+|-
+| canSteer ||
+* true
+* false
+|| specifies whether this wheel is steerable
+|-
+| controlAxisType ||
+* Forward
+|| If steerable, specifies the axis type
+|-
+| steeringModeType ||
+* AutomaticSteer
+* TankSteer
+|| uncertain: may refer to rack-and-pinion versus Track-type steering
+|-
+| brakeTorque ||
+* 300
+|| the dV (in m/s) of torque applied when using the breaks
+|-
+| brakeSpeed ||
+* 1.2
+|| the dV (in m/s) that braking will slow the vehicle under optimum conditions
+|-
+| impactTolerance ||
+* 2000
+|| dV that this part can withstand before breaking
+|-
+| overSpeedDamage ||
+* 60
+|| uncertain.  possibly reserved for future use, possible that this is the amount of dV of damage applied to this part whenever it exceeds it's rated speed
+|-
+| WHEEL || {}  ||
+|-
+| wheelName ||
+* wheel
+|| Internal name of the wheel
+|-
+| wheelColliderName ||
+* wheelCollider
+|| Internal name of the collider mesh for the wheel
+|-
+| suspensionTransformName ||
+* suspensionTraverse
+|| Animation for suspension usage
+|-
+| suspensionNeutralPointName ||
+* suspensionNeutralPoint
+|| Animation for the neutral point of the suspension
+|-
+| damagedObjectName ||
+* bustedwheel
+|| If you break it, you bought, and this is what you'll call it
+|-
+| rotateX ||
+* 0
+||
+|-
+| rotateY ||
+* 1
+||
+|-
+| rotateZ ||
+* 0
+||
+|-
+| steeringCurve || {}  ||
+keys, 0 16
+9
+2
+|-
+| torqueCurve || {} ||
+keys
+250 0 0
+100 0 0
+14 0 0
+0 0 0
+|}
+||
+<pre>
+MODULE
+{
+	name = ModuleWheel
+	hasMotor = true
+	resourceName = ElectricCharge
+        resourceConsumptionRate = 0.5
+	canSteer = true
+	controlAxisType = Forward
+	steeringModeType = AutomaticSteer
+	brakeTorque = 180
+	brakeSpeed = 1.0
+	impactTolerance = 65
+	overSpeedDamage = 20
+	WHEEL
+	{
+	    wheelName = wheel
+	    wheelColliderName = wheelCollider
+	    suspensionTransformName = suspensionTraverse
+	    suspensionNeutralPointName = suspensionNeutralPoint
+	    damagedObjectName = bustedwheel
+	    rotateX = 0
+	    rotateY = 1
+	    rotateZ = 0
+	}
+	steeringCurve
+ 	{
+   	 key = 0 18
+	 key = 15 6
+ 	}
+	torqueCurve
+	{
+	  key = 0 170 0 0
+	  key = 2.5 100 0 0
+	  key = 12 0 0 0
+	}
+}</pre>
+|-
+|
+=== MultiModeEngine ===
+Specifies that this part is an engine with multiple modes.  Added in [0.90], it allows for engines that use different types of resources and provides different flight characteristics depending on which mode it is operating in.  This module defines the different modes and passes them to moduleEnginesFX.
+{|class="wikitable"
+! variable !! example !! definition
+|-
+| primaryEngineID ||
+* AirBreathing
+* ClosedCycle
+|| this is passed to ModuleEnginesFX to determine the properties for this mode
+|-
+| secondaryEngineID ||
+* AirBreathing
+* ClosedCycle
+|| this is passed to ModuleEnginesFX to determine the properties for this mode
+|-
+|}
+||
+<pre>
+MODULE
+{
+ name = MultiModeEngine
+ primaryEngineID = AirBreathing
+ secondaryEngineID = ClosedCycle
+}
+</pre>
+|-
+|
+=== RetractableLadder ===
+Just like the name implies, this module is attached to parts that are or contain a retractable or collapsible ladder.
+{|class="wikitable"
+! variable !! example !! definition
+|-
+| ladderAnimationRootName ||
+* TelusBay
+* Telescopic ladder
+|| name of the beginning animation for this module
+|-
+| ladderColliderName ||
+* ladderCollider
+|| name of the collider mesh for this module
+|-
+| ladderRetractAnimationName ||
 * Retract
 || name of the retraction animation for this module
+|}
+||
+<pre>
+MODULE
+{
+ name = RetractableLadder
+ ladderAnimationRootName = TelusBay
+ ladderColliderName = ladderCollider
+ ladderRetractAnimationName = Retract
+}
+</pre>
+|-
+|
+|}
+== MODULES FROM MODS ==
+Defining a module is a task in and of itself and one that I'm sure has already been covered in other places.  Many modules defined by mods are duplicating effects that could be created with stock modules, but for one reason or another, the mod owner has decided to create their own modules (possibly for degree of control, possibly because the stock module didn't quite do everything they needed).  In any event, I've looked at some of the Mod modules, and detailed them below.  By mod, they are:
+=== Kerbal Assembly System ===
+Kerbal Assembly System is most noted for adding the option to grab and move parts using Kerbals.  It also allows for storage of certain parts in containers.
+MODULE:NEEDS[KAS]
+for the module
+{|
+! !!
+|-
+|
+{|class="wikitable"
+==== KASModuleContainer ====
+Specifies that this part can serve as a container for other parts, and how much storage space the part has.  Also included is an interaction distance.  Kerbals must be this close or closer to open the container.  Lots of sounds.
+! variable !! example !! definition
+|-
+| maxSize ||
+* 5
+* 20
+* 80
+|| specifies the size of the container relative to Kerbal Attachment System parts.
+|-
+| maxOpenDistance ||
+* 1
+* 5
+|| Kerbals must be at least this close (in meters) in order to open the container
+|-
+| sndStorePath ||
+* KAS/Sounds/hookBayStore
+|| sound stuff
+|-
+| sndOpenPath ||
+* KAS/Sounds/containerOpen
+|| sound stuff for opening the container
+|-
+| sndClosePath ||
+* KAS/Sounds/containerClose
+|| sound stuff for closing the container
+|-
+| bipWrongSndPath ||
+* KAS/Sounds/bipwrong
+|| sound stuff
+|-
+|}
+||
+<pre>MODULE
+{
+ name = KASModuleContainer
+ maxSize = 80
+}
+</pre>
+|-
+|
+{|class="wikitable"
+==== ModuleConnectedLivingSpace ====
+! variable !! example !! definition
+|-
+| passable ||
+* true
+* false
+|| specifies whether Kerbals can commute to parts connected to this part
+|-
+| passableWhenSurfaceAttached ||
+* true
+* false
+|| can be passed through even when connected to the ground?
+|-
+|}
+||
+<pre>
+MODULE
+{
+ name = ModuleConnectedLivingSpace
+ passable = true
+ passableWhenSurfaceAttached = true
+}
+</pre>
+|-
+|
+{|class="wikitable"
+==== KASModulePartBay ====
+! variable !! example !! definition
+|-
+| BAY || {} ||
+{|class="wikitable"
+|-
+| attachNode ||
+* top
+* bottom
+|| attachment placement
+|-
+| type ||
+* containerA
+* container
+* hookBay
+||
+|-
+|}
+|-
+|}
+||
+<pre>
+MODULE
+{
+ name = KASModulePartBay
+ BAY
+ {
+  attachNode = top
+  type = containerA
+  type = containerB
+ }
+}
+</pre>
+|-
+|
+{|class="wikitable"
+==== KASModulePort ====
+! variable !! example !! definition
+|-
+| attachNode ||
+* top
+|| unsure
+|-
+| nodeType ||
+* kasplug
+|| unknown
+|-
+| breakForce ||
+* 30
+|| unknown
+|-
+| nodeTransformName ||
+* plugNode
+|| unknown
+|-
+|}
+||
+<pre>
+MODULE
+{
+ name = KASModulePort
+ attachNode = top
+ nodeType = kasplug
+ breakForce = 30
+ nodeTransformName = plugNode
+}
+</pre>
+|-
+|
+{|class="wikitable"
+==== KASModuleAnchor ====
+! variable !! example !! definition
+This module will set a custom drag value when the part touch the ground.
+|-
+| groundDrag ||
+* 500
+|| Drag value of the anchor when it touch the ground
+|-
+| bounciness ||
+* 0
+|| Bounciness of the anchor
+|-
+| dynamicFriction ||
+* 0.8
+|| Dynamic friction of the anchor when it touch the ground
+|-
+| staticFriction ||
+* 0.8
+|| Static friction of the anchor when it touch the ground
+|-
+|}
+||
+<pre>
+MODULE
+{
+ name = KASModuleAnchor
+ groundDrag = 500
+ bounciness = 0
+ dynamicFriction = 0.8
+ staticFriction = 0.8
+}
+</pre>
+|-
+|
+{|class="wikitable"
+==== KASModuleMagnet ====
+This module will make the part acting like a magnet, collided part will be automatically attached. Only work when attached on a winch.
+! variable !! example !! definition
+|-
+| breakForce ||
+* 10
+|| The force that needs to be applied on the magnet joint to break.
+|-
+| attachToEva ||
+* true
+* false
+|| Disable/enable attraction of eva
+|-
+| minFwdDot ||
+* 0.998
+|| Minimum magnet alignement needed to attach (1 is perfectly aligned)
+|-
+| powerDrain ||
+* 4
+|| Power consumption when the magnet is used
+|-
+|}
+||
+<pre>
+MODULE
+{
+ name = KASModuleMagnet
+ breakForce = 10
+ attachToEva = False
+ minFwdDot = 0.998
+ powerDrain = 4
+}
+</pre>
+|-
+|
+{|class="wikitable"
+==== KASModuleStrut ====
+! variable !! example !! definition
+|-
+| nodeTransform ||
+* pipeNode
+* strutNode
+|| unknown
+|-
+| type ||
+* PipeSize1
+* StrutSize1
+|| Unkown
+|-
+| maxLength ||
+* 20
+* 8
+|| unknown
+|-
+| maxAngle ||
+* 100
+|| unknown
+|-
+| breakForce ||
+* 10
+|| unknown
+|-
+| allowDock ||
+* true
+* false
+|| unknown
+|-
+| allowPumpFuel ||
+* true
+* false
+|| unknown
+|-
+| hasCollider ||
+* true
+* false
+|| unknown
+|-
+| tubeScale ||
+* 0.15
+|| unknown
+|-
+| jointScale ||
+* 0.15
+|| unknown
+|-
+| textureTiling ||
+* 1
+* 4
+|| unknown
+|-
+| tubeSrcType ||
+* Joined
+* Rounded
+|| Unknown
+|-
+| tubeTgtType ||
+* Joined
+* Rounded
+|| unknown
+|-
+| evaStrutPos ||
+* (0.05, 0.059, -0.21)
+|| unknown
+|-
+| evaStrutRot ||
+* (190.0, 0.0, 0.0)
+|| unknown
+|-
+| tubeTexPath ||
+* KAS/Textures/pipe
+|| unknown
+|-
+|}
+||
+<pre>
+MODULE
+{
+ name = KASModuleStrut
+ nodeTransform = pipeNode
+ type = PipeSize1
+ maxLenght = 20
+ maxAngle = 100
+ breakForce = 10
+ allowDock = true
+ allowPumpFuel = true
+ hasCollider = false
+ tubeScale = 0.15
+ jointScale = 0.15
+ textureTiling = 1
+ tubeSrcType = Joined
+ tubeTgtType = Joined
+ evaStrutPos = (0.05, 0.059, -0.21)
+ evaStrutRot = (190.0, 0.0, 0.0)
+        tubeTexPath = KAS/Textures/pipe
+}
+</pre>
+|-
+|
+{|class="wikitable"
+==== KASModuleGrapplingHook ====
+This module will make the part acting like a grappling-hook, any collided part in front of the grapple will be automatically attached if the inpact is strong enough. Only work when attached on a winch.
+! variable !! example !! definition
+|-
+| partBreakForce ||
+* 6
+|| The force that needs to be applied on the grapple/part joint to break.
+|-
+| staticBreakForce ||
+* 15
+|| The force that needs to be applied on the grapple/static joint to break.
+|-
+| aboveDist ||
+* 0.05
+|| Distance from the attach point to the center of the part
+|-
+| forceNeeded ||
+* 4
+|| Collision force needed to attach the grapple.
+|-
+| attachToPart ||
+* true
+* false
+|| Disable/enable attachment on parts.
+|-
+| rayDir  ||
+* (0,-1,0)
+|| Direction of the attach raycast. Attachment will be done only with objects in that direction.
+|-
+| rayLenght ||
+* 0.8
+|| Attach ray lenght.
+|-
+|}
+||
+<pre>
+MODULE
+{
+ name = KASModuleGrapplingHook
+ partBreakForce = 6
+ staticBreakForce = 15
+ aboveDist = 0.05
+ forceNeeded = 4
+ attachToPart = true
+ rayDir = (0,-1,0)
+ rayLenght = 0.8
+}
+</pre>
+|-
+|
+{|class="wikitable"
+==== KASModuleWinch ====
+! variable !! example !! definition
+|-
+| maxLenght ||
+* 50
+* 80
+|| unknown
+|-
+| cableSpring ||
+* 1000
+||
+|-
+| cableDamper ||
+* 0.1
+||
+|-
+| cableWidth ||
+* 0.04
+||
+|-
+| motorMaxSpeed ||
+* 2
+||
+|-
+| motorAcceleration ||
+* 0.05
+||
+|-
+| powerDrain ||
+* 0.5
+* 0.3
+||
+|-
+| headTransformName ||
+* head
+||
+|-
+| headPortNodeName ||
+* portNode
+||
+|-
+| connectedPortNodeName ||
+* bottom
+* front
+||
+|-
+| anchorNodeName ||
+* anchorNode
+||
+|-
+| evaGrabHeadPos ||
+* (0.05, 0.01, -0.11)
+||
+|-
+| evaGrabHeadDir ||
+* (0,0,1)
+||
+|-
+| evaDropHeadPos ||
+* (0.05, 0.01, -0.16)
+||
+|-
+| evaDropHeadRot ||
+* (180.0, 0.0, 0.0)
+||
+|-
+| ejectEnabled ||
+* true
+* false
+||
+|-
+| ejectForce ||
+* 20
+||
+|-
+| lockMinDist ||
+* 0.12
+||
+|-
+| lockMinFwdDot ||
+* 0.90
+||
+|-
+|}
+||
+<pre>
+MODULE
+{
+ name = KASModuleWinch
+ maxLenght = 50
+ cableSpring = 1000
+ cableDamper = 0.1
+ cableWidth = 0.04
+ motorMaxSpeed = 2
+ motorAcceleration = 0.05
+ powerDrain = 0.5
+ headTransformName = head
+ headPortNodeName = portNode
+ connectedPortNodeName = bottom
+ anchorNodeName = anchorNode
+ evaGrabHeadPos = (0.05, 0.01, -0.11)
+ evaGrabHeadDir = (0,0,1)
+ evaDropHeadPos = (0.05, 0.01, -0.16)
+ evaDropHeadRot = (180.0, 0.0, 0.0)
+ ejectEnabled = true
+ ejectForce = 20
+ lockMinDist = 0.12
+ lockMinFwdDot = 0.90
+}
+</pre>
+|-
+|}
+=== Universal Storage ===
+Universal Storage.  By the by:  Excellently documented!
+{|
+! !!
+|-
+|
+{|class="wikitable"
+==== ModuleAnimator ====
+Animation module.
+! variable !! example !! definition
+|-
+| animationName ||
+* Take 001
+|| Name of the animation from the model.
+|-
+| guiEnableName ||
+* Wedge Locks Off
+|| Part tooltip name to display for deployment
+|-
+| guiDisableName ||
+* Wedge Locks Off
+|| Part tooltip name to display for retraction
+|-
+| actionEnableName ||
+* Wedge Locks Off
+|| Action group name for deployment
+|-
+| actionDisableName ||
+* Wedge Locks On
+|| Action group name for retraction
+|-
+| animationSpeed ||
+* 100000
+|| Speed of the animation
+|-
+| oneShot ||
+* true
+* false
+|| If the animation can only be played once
+|-
+| activeEditor ||
+* true
+* false
+|| If the part toolitp is visible in the editor
+|-
+| activeFlight ||
+* true
+* false
+|| If the part tooltip is visible in flight
+|-
+| activeUnfocused ||
+* true
+* false
+|| If the part tooltip is visible from EVA
+|-
+| unfocusedRange ||
+* 5
+|| EVA visible range
+|-
+|}
+||
+<pre>
+ MODULE
+ {
+  name = ModuleAnimator
+  animationName = Take 001
+  guiEnableName = Wedge Locks Off
+  guiDisableName = Wedge Locks On
+  actionEnableName = Wedge Locks Off
+  actionDisableName = Wedge Locks On
+  animationSpeed = 100000
+  oneShot = false
+  activeEditor = true
+  activeFlight = false
+  activeUnfocused = false
+  unfocusedRange = 5
+ }
+</pre>
+|-
+|
+{|class="wikitable"
+=== Umbra Space Industries:Regolith ===
+Note: DEPRECATED (use stock resource converter's)
+==== REGO_ModuleResourceConverter ====
+! variable !! example !! definition
+|-
+| ConverterName ||
+* Water Electrolizer
+|| Flavor Text
+|-
+| StartActioName ||
+* Start Water Electrolizer
+|| Flavor Text
+|-
+| StopActioName ||
+* Stop Water Electrolizer
+|| Flavor Text
+|-
+| RecipeInputs ||
+* ElectricCharge, 14, Water, 0.0000176697
+||
+|-
+| RecipeOutputs ||
+* Hydrogen, 0.0219907427, True, Oxygen, 0.0109953713, False
+||
+|-
+|}
+||
+<pre>
+MODULE
+{
+  name = REGO_ModuleResourceConverter
+  ConverterName = Water Electrolizer
+  StartActionName = Start Water Electrolizer
+  StopActionName = Stop Water Electrolizer
+  RecipeInputs = ElectricCharge, 14, Water, 0.0000176697
+  RecipeOutputs = Hydrogen, 0.0219907427, True, Oxygen, 0.0109953713, False
+}
+</pre>
+|-
+|}
+=== Umbra Space Industries: ExpPack ===
+USI is widely known for building an entire add-on family of interconnected and cross-supported parts and extensions.  Here we detail mods added by the ExpPack.
+{|
+! !!
+|-
+|
+{|class="wikitable"
+==== USI_ClearIVA ====
+No calls.
 |}
 ||
@@ Line 2,001: / Line 3,582: @@
 MODULE
 {
-  name = RetractableLadder
+  name = USI_ClearIVA
- ladderAnimationRootName = TelusBay
- ladderColliderName = ladderCollider
- ladderRetractAnimationName = Retract
 }
 </pre>
 |-
-|
-== MODULES POSSIBLY FROM MODS ==
-defining a module has it's own problems, of course, and I'm no expert, but I did find this along the way:
-=== ModuleLiftingSurface ===
-{|class="wikitable"
-! variable !! example !! definition
-|-
-| deflectionLiftCoeff ||   ||
-.3 (BSLmk2ScienceFuselage)
-|-
-| dragAtMaxAoA ||   ||
-.15 (BSLmk2ScienceFuselage)
-|-
-| dragAtMinAoA ||   ||
-.1 (BSLmk2ScienceFuselage)
 |}
-||
+[[Category:Documentation]][[Category:Modding]]
-<pre>
-</pre>
-|-
-|
-MODULE:NEEDS[KAS]
-for the module
-=== KASModuleContainer ===
-{|class="wikitable"
-! variable !! example !! definition
-|-
-|-
-| maxSize ||   ||
-specifies the size of the container relative to Kerbal Attachment System parts.
-|-
-| maxOpenDistance ||   ||
-|-
-| sndStorePath ||   ||
-KAS/Sounds/hookBayStore
-|-
-| sndOpenPath ||   ||
-KAS/Sounds/containerOpen
-|-
-| sndClosePath ||   ||
-KAS/Sounds/containerClose
-|-
-| bipWrongSndPath ||   ||
-KAS/Sounds/bipwrong
-|}

Difference between revisions of "Module"

Latest revision as of 05:48, 5 July 2021

Contents

STOCK MODULES

CModuleFuelLine

CModuleLinkedMesh

CModuleStrut

FlagDecal

FXModuleAnimateThrottle

FXModuleConstrainPosition

FXModuleLookAtConstraint

KerbalSeat

LaunchClamp

ModuleAlternator

ModuleAnchoredDecoupler

ModuleAnimateGeneric

ModuleAnimateHeat

ModuleAsteroid

ModuleCargoBay

ModuleCommand

ModuleControlSurface

ModuleDataTransmitter

ModuleDecouple

ModuleDeployableSolarPanel

ModuleDockingNode

ModuleEngines

ModuleEnginesFX

ModuleEnviroSensor

ModuleGenerator

ModuleGimbal

ModuleGrappleNode

ModuleJettison

ModuleLandingGear

ModuleLandingLeg

ModuleLight

ModuleParachute

ModuleRCS

ModuleReactionWheel

ModuleResourceConverter

ModuleResourceHarvester

ModuleResourceIntake

ModuleSAS

ModuleScienceContainer

ModuleScienceExperiment

ModuleScienceLab

ModuleSteering

ModuleTestSubject

ModuleWheel

MultiModeEngine

RetractableLadder

MODULES FROM MODS

Kerbal Assembly System

KASModuleContainer

ModuleConnectedLivingSpace

KASModulePartBay

KASModulePort

KASModuleAnchor

KASModuleMagnet

KASModuleStrut

KASModuleGrapplingHook

KASModuleWinch

Universal Storage

ModuleAnimator

Umbra Space Industries:Regolith

REGO_ModuleResourceConverter

Umbra Space Industries: ExpPack

USI_ClearIVA

Navigation menu

Search