Difference between revisions of "Terminology"

Revision as of 07:58, 25 November 2013

In KSP, there are many terms pertaining to orbiting and physics that often can be confusing to non-technicians. In addition, various other scientific terms and abbreviations are used to describe common terms.

This sheet is designed as a concise lookup table of necessary terms to help you get started down the road to being a full fledged astronaut!

Mathematics

Cartesian coordinate system - Uses rectangular coordinates

Polar coordinate system - Uses only angles and one length

Elliptical: Oval shaped, often in reference to your orbit.
Normal vector: A vector perpendicular to a plane.
Scalar: A single value without a direction. Scalars are usually followed by a unit of measurement that tells what the scalar's dimension is. eg 3 m/s, 3 m,3 s are scalar: they have units which denote speed, length/distance, and time respectively, but have no direction.
Vector: A set of a direction and a value. eg. heading (direction) and speed together give a velocity. How a vector is expressed depends on what the coordinate system is, and how many dimensions are taken into consideration. <35°, 12> is a two dimensional polar vector, where <14, 9, -20> is a three dimensional Cartesian vector. There are other coordinate systems but these are the most utilized.

<35°, 12> looks like an arrow which is 12 units long, starting from the origin (zero, angle does not matter because it is a point with no length) and ending at a point 35° from the base axis (typically the x-axis, positive angles progress counter-clockwise)

<14, 9, -20> looks like an arrow starting from the origin (<0,0,0>) and ending at a point where the x coordinate is at 14, the y coordinate = 9 and the z coordinate = -20.

The upside to using Cartesian coordinates is that you know exactly where the terminal position is, but it is more difficult to figure the length, however in polar coordinates it is trivial to find the length, the downside is its more difficult to know the position.

The following physical qualities are all vectors: velocity, acceleration, force

A 3D coordinate systems needs:

A point of reference. This is your origin.
3 base-vectors. These define your base unit of measurement along the axis and the direction of said axis.
A mix of 3 scalars, that could be either angles or co-ordinates to express locations in your co-ordinate space.

Orbital Terms

Visualization of the most common orbital parameters

Apoapsis: In an elliptical orbit, the point of the orbit farthest from the body being orbited.
Periapsis: In an elliptical orbit, the point of the orbit closest to the body being orbited.
Peri-* and Apo-*: When speaking of orbits, oftentimes the words "periapsis" and "apoapsis" will be modified to specify which planet or moon the orbit is around. For example, -kee and -kerb are both commonly used to describe orbits around Kerbin, resulting Perikee/Perikerb and Apokee/Apokerb.
Ascending node: The point at which the orbit crosses the reference plane moving north. Here, "north" means the direction of the orbit normal of the reference plane.
Descending node: The point at which the orbit crosses the reference plane moving south.
Eccentricity

${\text{ecc}}=1-{\frac {2}{{\frac {Ap}{Pe}}+1}}$

A scalar describing how non-circular an orbit is.

ecc = 0 → circular orbit.
0 < ecc < 1 → elliptical orbit.
ecc = 1 → parabolic orbit - this is an escape orbit.
ecc > 1 → hyperbolic orbit - this is an escape orbit.

Inclination: The angle between an orbital plane relative to a reference plane (e.g. an orbit with 90° inclination to an equatorial reference plane would be called polar).
Low orbit: An orbit that is only just high enough to indefinitely avoid succumbing to hazards of the body being orbited, such as atmospheric drag. Low orbits are used as stepstones, after ascent and before burning to another rendezvous object (planet or vessel), as it allows the exit burn to be performed in any direction and requires the least amount of fuel to reach from the body's surface. A low orbit for Kerbin is typically between 80km and 100km. Bodies with no atmosphere can theoretically allow an orbit at any height above the ground, but below 10km the risk of crashing into mountains or other elevated terrain becomes very high. The time warp is restricted to lower values while in low orbits.
Orbital nodes: Specific points of reference in any orbit such as Apoapsis, Periapsis, intersect points with other orbits etc.
Orbit normal: A normal vector of the Orbital Plane. Produced by cross multiplying the ship's velocity and gravity. Since this follows the right hand rule, from a perspective where the ship is orbiting counter-clockwise it will point "up", while for a ship orbiting "clockwise" it will point down. "Up" is also often labeled as "North" or "N+", and in tandem with that "Down" is labeled "Anti-Normal", "South" or "N-".
Orbital plane: The imaginary disk described by the path of an orbit around a body (commonly used when describing inclinations).
Prograde: The direction in which a ship is traveling along its orbital path. Since orbits are elliptical, it is always tangent to the orbit at the point where the ship is.
Retrograde: The reverse of Prograde, backwards along the orbital path.
Reference plane: Any plane used as a reference for describing your current orbit. For local orbits around a planet, this is often the equatorial plane. When multiple bodies in a solar system are involved, the ecliptic plane can be used. For intercepting another orbiting body, the orbital plane of the body to be intercepted is used. An orbital plane can be fully described by giving the inclination and the longitude of the ascending node relative to a reference plane.
Semi-major axis: The major-axis is the long axis of an ellipse, and the semi-major axis is half of this. In KSP the semi-major axis is calculated with ${\text{sma}}={\text{radius}}+{\frac {Ap+Pe}{2}}$ . It's the average of the Apoapsis and Periapsis computed relative to the center of the body. As both are relative to the body's surface, the radius must be added. All orbits with the same semi-major axis have the same period, regardless of their eccentricity.
Sub-orbital: Describes an orbit where the periapsis is below the surface of a planetary body. If a suborbital path is followed for too long the orbiter will collide with the body being orbited.
Thrust-to-weight ratio: → See also: Thrust-to-weight ratio; ${\text{TWR}}={\frac {T}{W}}={\frac {T}{m\cdot g}}$ The Ratio between the total mass of the vehicle and the available thrust of all propulsion devices of the vehicle/current stage. A TWR greater than 1 means the craft will have enough thrust to accelerate vertically and gain altitude. A TWR below 1 means that the craft won't be able to counteract gravity and drag at low altitudes, although in space it only means that maneuvers will take longer. Because the weight (W) depends on the current gravitational acceleration (g) the TWR depends on which body is currently influencing the craft. The acceleration on the Mun's surface is only 16.6 % of Kerbin's acceleration, so at the surface a TWR_Kerbin = 1 would be a TWR_Mun = 6.

Ship Orientation

The ship orientation is always relative to an specific object. The terms are usually defined relative to the cockpit.

Zenith: Top side of the ship which is usually oriented away from the orbited body. Opposite of nadir.
Nadir: Bottom side of the ship which usually oriented towards the orbited body. Opposite of zenith.
Port(side): Left side of the ship. Opposite of starboard.
Starboard: Right side of the ship. Opposite of portside.
Front: Front side/end of the ship which is usually towards the nose or prograde vector. Opposite of aft.
Aft: Back side/end of the ship which is usually housing the primary rockets and facing in retrograde. Opposite of front.

Space Maneuvers

Atmospheric Braking: → Main article: Aerobraking; Lowering the periapsis so it is inside a planetary atmosphere. This will lead to the vessel being slowed by atmospheric drag. Can lead to reentry (see below), but also is used to reduce the necessary burn time for significant orbit alterations.
Atmospheric entry: Entering atmosphere and using drag to decelerate a vessel to a groundwards trajectory. This usually causes intense heat stress on the object as the vessel requires sufficient speed to not "bounce" back from the atmosphere into space. Currently (0.22^[outdated]) re-entry is only partially implemented with effects but heat and bounce are not yet implemented, there are mods however which allow parts to overheat. This is usually called re-entry/reentry but in theory only correct in Kerbin's atmosphere; atmospheric entry being the more general term.
Burn: firing of the engines, usually to alter trajectory in some way.
Circularizing: A maneuver (firing of the engines) that makes an orbit's eccentricity 0, or close to zero. This is usually achieved by a burn close to an apsis.
Maneuver Node: → Main article: Maneuver node; Maneuver nodes are a nice tool to plan and project trajectory changes in map view prior to doing the actual burn.
Re-entry: → See also: Atmospheric entry
Retroburn: A burn performed "backwards", e.g. with the engines facing towards prograde and nose towards retrogade (hence the name). This is a common maneuver to used to lower the height of the orbit without altering any other orbital parameters.

Physics

Acceleration: Rate of change to your velocity. Acceleration is a vector, measured in "m/s²".
Ballistic trajectory: A falling object's trajectory is ballistic. In rocketry it usually indicates that the object in question is only influenced by gravity and does not exert any force (ie. thrust) of its own.
Delta-v (Δv): The change in velocity that has or can be exerted by your spacecraft. This is measured in meters per second (m/s). More mass can reduce the delta-v, while more propulsion can increase it. This makes it a useful value to calculate efficiency of launch vehicles. For example, a launch vehicle requires about 4,000 m/s of delta-v to escape Kerbin's atmosphere and achieve a stable orbit.
Energy: → See also: Specific orbital energy on Wikipedia; The energy of an object in an orbit is the sum of its potential and kinetic energy. The potential energy is $E_{p}=-{\frac {GMm}{R}}$ and kinetic energy $E_{k}={\frac {1}{2}}mv^{2}$ where G is the gravitational constant, M is the mass of the body, m is the mass of the craft, R is the distance from the center of the body and v is the velocity. This results in $E=E_{k}+E_{p}={\frac {1}{2}}mv^{2}-{\frac {GMm}{R}}$ . This sum stays the same when not thrusting: When approaching periapsis potential energy is transferred into kinetic energy. After passing the periapsis the kinetic energy is converted back into potential energy. When the energy or specific orbital energy is greater than zero the vehicle is on an escape trajectory.; There is also the specific orbital energy ( $\epsilon$ ) which doesn't require the mass of the craft: $E_{p}=\epsilon _{p}m$ , $E_{k}=\epsilon _{k}m$ , $E=\epsilon \,m=(\epsilon _{k}+\epsilon _{p})m=-{\frac {GM}{2a}}$ . All orbits with the same semi-major axis (a) have the same specific orbital energy.
Escape Velocity: The velocity needed to escape a given planet's gravity well, as given by $v_{e}={\sqrt {\frac {2GM}{r}}},$ where G is the gravitational constant, M is the mass of the planet, and r is the radius of the planet.
g-force (G): A measurement of acceleration as expressed in the sea-level force of Earth's gravity with 1 G being about 9.81 m/s². An object at Earth's surface is accelerated at 1 G. The object weighs twice as much when at 2 G acceleration and is weightless when accelerated with 0 G. In free fall, like in orbit, and without an engine running or an atmosphere applying drag all objects experience no acceleration which can be expressed as 0 G.
Gravity: The force exerted by all objects with mass. Very weak. Usually only objects with very high mass - ie. planets, moons - have any noticeable effect. Diminishes with the square of distance from the center of mass. So for an object twice as far, experiences only 1/2² = 1/4 of the gravity.
Gravity Well: The area around a planet affected by gravity. Actually extends to infinity, but as gravity decreases quadratically with distance (if you multiply by 2 the distance, the gravity is divided by 4), it is only significant within the planet's sphere of influence.
Orbit: → Main article: Orbit; When an object has sufficient tangential velocity (and is outside the atmosphere, so drag won't slow it down) so that it will keep falling "next" to the planet (never touching ground) its trajectory is called an orbit. Stable orbits are elliptical (a circle is an ellipse with zero eccentricity). If the objects tangential speed exceeds escape velocity it's orbit will be either para- or hyperbolic.
Specific Impulse (I_sp): → Main article: Specific impulse; $I_{sp}={\frac {T}{\dot {m}}},[I_{sp}]={\frac {m}{s}}$ The I_sp defines how effective a propulsion system is. The higher the I_sp the more powerful is the thrust applied to the rocket with the same fuel mass. The I_sp is usually given in seconds but actually the physically correct unit is distance per time which is usually given in meters per second or feet per second. To avoid confusion which unit of speed is used, the physical correct I_sp (in distance/time) is divided by the surface gravity of Earth (9.81 m/s²). This results in a value given in seconds. To use this I_sp in formulas it must to be converted back into distance per time which requires multiplying with the surface gravity of Earth again. As this value is only used to convert between those two units, the specific impulse doesn't change when the gravity changes. It appears that KSP use a value like 9.82 m/s² and thus using a little less fuel.; As the specific impulse is the ratio of thrust and fuel flow ${\frac {Ns}{kg}}$ is sometimes given as the unit. This is mathematically another form of ${\frac {m}{s}}=kg\cdot {\frac {m}{s^{2}}}\cdot {\frac {s}{kg}}$ because force is the multiplication of mass and acceleration defining $N=kg\cdot {\frac {m}{s^{2}}}$ . So $1{\frac {Ns}{kg}}=1{\frac {m}{s}}$ with the latter being simply only in SI base units.
Sphere of influence: The radius around a celestial body within which its gravity well is non-negligible. Commonly known as SoI/SOI.
Tangential velocity: The component of your velocity that is tangential to your trajectory. Instantaneous velocity - velocity when the time of measurement approaches zero - is always tangential to your trajectory.
Trajectory: A trajectory is the path that a moving object follows through space as a function of time.
Velocity: Rate of change of your position. Your speed and direction. Velocity is a vector, measured in meters per second (m/s).

@@ Line 129: / Line 129: @@
 {{Main article|Specific impulse}}
 :<math style="float:right">I_{sp}= \frac{T}{\dot m}, [I_{sp}] = \frac{m}{s}</math>The I<sub>sp</sub> defines how effective a propulsion system is. The higher the I<sub>sp</sub> the more powerful is the thrust applied to the rocket with the same fuel mass. The I<sub>sp</sub> is usually given in ''seconds'' but actually the physically correct unit is ''distance per time'' which is usually given in ''meters per second'' or ''feet per second''. To avoid confusion which unit of speed is used, the physical correct I<sub>sp</sub> (in ''distance/time'') is divided by the surface gravity of Earth (9.81&nbsp;m/s²). This results in a value given in ''seconds''. To use this I<sub>sp</sub> in formulas it must to be converted back into ''distance per time'' which requires multiplying with the surface gravity of Earth again. As this value is only used to convert between those two units, the '''specific impulse doesn't change when the gravity changes'''. It appears that KSP use a value like 9.82&nbsp;m/s² and thus using a little less fuel.
-:As the specific impulse is the ratio of thrust and fuel flow <math>\frac{Ns}{kg}</math> is sometimes given as the unit. This is mathematically another form of <math>\frac{m}{s} = kg \cdot \frac{m}{s^2} \cdot \frac{s}{kg}</math> because force is the multiplication of mass and acceleration defining <math>N = kg \cdot \frac{m}{s^2}</math>. So <math>1 \frac{Ns}{kg} = 1 \frac{m}{s}</math> with the later begin simply only in SI base units.
+:As the specific impulse is the ratio of thrust and fuel flow <math>\frac{Ns}{kg}</math> is sometimes given as the unit. This is mathematically another form of <math>\frac{m}{s} = kg \cdot \frac{m}{s^2} \cdot \frac{s}{kg}</math> because force is the multiplication of mass and acceleration defining <math>N = kg \cdot \frac{m}{s^2}</math>. So <math>1 \frac{Ns}{kg} = 1 \frac{m}{s}</math> with the latter being simply only in SI base units.
 ;<span id="soi">Sphere of influence</span>
-:The radius around a celestial body where its gravity well is non-neglectable. Commonly known as SoI/SOI.
+:The radius around a celestial body within which its gravity well is non-negligible. Commonly known as SoI/SOI.
 ;Tangential velocity
-:The component of your velocity that's tangential to your trajectory. Instantaneous velocity - velocity when the time of measurement approaches zero - is always tangential to your trajectory.
+:The component of your velocity that is tangential to your trajectory. Instantaneous velocity - velocity when the time of measurement approaches zero - is always tangential to your trajectory.
 ;Trajectory
 :A trajectory is the path that a moving object follows through space as a function of time.

Difference between revisions of "Terminology"

Revision as of 07:58, 25 November 2013

Contents

Mathematics

Orbital Terms

Ship Orientation

Space Maneuvers

Physics

See also

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

KSP links

Quick access

Languages

Data templates

Tools