Difference between revisions of "Asparagus staging"
Rureglathon (talk | contribs) m (Added a link to my video version of this tutorial) |
(*rewritten most of the article; -part count isn't really an issue here; *summarized about the drag (but is not unique to AS); +names;) |
||
| Line 1: | Line 1: | ||
[[File:Asparagus-staging.svg|right|thumb|All engines uses first S4's fuel, then S3's fuel and so on]] | [[File:Asparagus-staging.svg|right|thumb|All engines uses first S4's fuel, then S3's fuel and so on]] | ||
| − | |||
| − | Asparagus staging is a method to build very efficient | + | '''Asparagus staging''' is a method to build very efficient [[rocket]]s. The stock vessel [[Kerbal X]] demonstrates this technique. |
| − | The idea is | + | == Function == |
| + | The idea is to create a rocket with a lot of parallel [[rocket engine]]s with fuel tanks on top of them. All engines ignite at the same time. The trick, however, is that each rocket engine isn't depleting its own tank, but they are all draining their fuel from the outermost tanks. When these are depleted, the outmost tanks with their engines are decoupled and the next fuel tank takes over which is still completely full. The result is that the rocket always flies with the minimum number of tanks required to transport the fuel it has left while also constantly using all engines it has on board. | ||
| − | This concept can be realized through fuel | + | This concept can be realized through [[fuel line]]s which connect the stages in the order they will be dropped. It uses the fact that engines will always take their fuel from the most distant fuel tank available. |
| − | The | + | == Disadvantages == |
| + | [[File:AsparagusStaging-6x3.png|right|300px|thumb|Overhead view of a vessel using massive asparagus staging]] | ||
| + | The biggest disadvantage of this technique is the complexity of building it. Usually the symmetry modes can only be used partially. One way is to only mirror each separate stage allowing to use symmetry for the complete setup. One drawback is, that the engines then are not always at the same height which may induce torque. Another way is to build everything except the fuel lines with the symmetry mode, but there each fuel line needs to be placed manually. | ||
| − | + | With more massive payloads it may require more layers of fuel stacks and struts, making the technique challenging due to the high part count. Although a rocket without asparagus staging has a higher part count because it is more inefficient. The part count can be reduced by installing rocket part mods that provide fuel tanks and engines of larger sizes, allowing to achieve equal performance with less parts, more stability and better looks. | |
| − | + | Another disadvantage is that rockets utilizing this design may be unrealistic, because there is no real world application yet. It also might look not aesthetic especially with multiple layers, because there are then many small rockets bundled together. | |
| − | The | + | The rocket tends to start to [[roll]] when using this type of staging which might result in a loss in control of the craft. It also looses thrust with each staging event but only a lower mass compared to other staging methods. This can cause a serious drop of velocity reducing the efficiency. |
| − | + | === Drag === | |
| + | As rockets with asparagus staging may be wider than usual vertical stacked their real world [[drag]] would be higher. But as the drag depends on the mass instead of the cross-sectional area, there is no disadvantage of using asparagus staging when comparing the drag with other methods. | ||
| − | + | Although this might change in the future — [[Planned features#Physics & Dynamics|the developers have already announced that the aerodynamic model will be made more realistic in future versions]]{{cn}}<sup>[''not cited in the link'']</sup> — this will most likely not a big issue, as the advantages outweigh this. But it will likely make it a lot more challenging to create aerodynamic crafts which use this technique excessively. | |
| − | + | == Real world application == | |
| + | This system is currently only a feature of Kerbal Space Program. In the real world there might be one craft, the [[w:Falcon Heavy|Falcon Heavy]] by 2014/2015 which uses this type of staging, although only with one level. The problem with asparagus staging is, that transferring fuel to an engine is already complicated. With additional pumps transferring between tanks the rocket becomes more complicated which may reduce the reliability. | ||
| − | + | In 1947, [[w:Mikhail Tikhonravov|Mikhail Tikhonravov]] developed this kind of staging which he called “packet rockets”. This lead to the development of the [[w:R-7 Semyorka|R-7 Semyorka]]. Later developments of this rocket became then the [[w:R-7 (rocket family)|R-7 rocket family]]. But all those rockets never used the original “packet rockets”/asparagus staging. | |
| − | + | == Name == | |
| + | Because there is no real world application of the asparagus staging, the name itself is a creation by the players of KSP and not an official word used in rocket science. Because of the design it is also called “onion staging”. | ||
| − | + | == See also == | |
| − | + | * [http://www.youtube.com/watch?v=rKGfwr2vrew Asparagus Staging Tutorial] by Rureglathon | |
| − | |||
| − | |||
| − | |||
Revision as of 12:05, 5 December 2013
Asparagus staging is a method to build very efficient rockets. The stock vessel Kerbal X demonstrates this technique.
Function
The idea is to create a rocket with a lot of parallel rocket engines with fuel tanks on top of them. All engines ignite at the same time. The trick, however, is that each rocket engine isn't depleting its own tank, but they are all draining their fuel from the outermost tanks. When these are depleted, the outmost tanks with their engines are decoupled and the next fuel tank takes over which is still completely full. The result is that the rocket always flies with the minimum number of tanks required to transport the fuel it has left while also constantly using all engines it has on board.
This concept can be realized through fuel lines which connect the stages in the order they will be dropped. It uses the fact that engines will always take their fuel from the most distant fuel tank available.
Disadvantages
The biggest disadvantage of this technique is the complexity of building it. Usually the symmetry modes can only be used partially. One way is to only mirror each separate stage allowing to use symmetry for the complete setup. One drawback is, that the engines then are not always at the same height which may induce torque. Another way is to build everything except the fuel lines with the symmetry mode, but there each fuel line needs to be placed manually.
With more massive payloads it may require more layers of fuel stacks and struts, making the technique challenging due to the high part count. Although a rocket without asparagus staging has a higher part count because it is more inefficient. The part count can be reduced by installing rocket part mods that provide fuel tanks and engines of larger sizes, allowing to achieve equal performance with less parts, more stability and better looks.
Another disadvantage is that rockets utilizing this design may be unrealistic, because there is no real world application yet. It also might look not aesthetic especially with multiple layers, because there are then many small rockets bundled together.
The rocket tends to start to roll when using this type of staging which might result in a loss in control of the craft. It also looses thrust with each staging event but only a lower mass compared to other staging methods. This can cause a serious drop of velocity reducing the efficiency.
Drag
As rockets with asparagus staging may be wider than usual vertical stacked their real world drag would be higher. But as the drag depends on the mass instead of the cross-sectional area, there is no disadvantage of using asparagus staging when comparing the drag with other methods.
Although this might change in the future — the developers have already announced that the aerodynamic model will be made more realistic in future versions[citation needed][not cited in the link] — this will most likely not a big issue, as the advantages outweigh this. But it will likely make it a lot more challenging to create aerodynamic crafts which use this technique excessively.
Real world application
This system is currently only a feature of Kerbal Space Program. In the real world there might be one craft, the Falcon Heavy by 2014/2015 which uses this type of staging, although only with one level. The problem with asparagus staging is, that transferring fuel to an engine is already complicated. With additional pumps transferring between tanks the rocket becomes more complicated which may reduce the reliability.
In 1947, Mikhail Tikhonravov developed this kind of staging which he called “packet rockets”. This lead to the development of the R-7 Semyorka. Later developments of this rocket became then the R-7 rocket family. But all those rockets never used the original “packet rockets”/asparagus staging.
Name
Because there is no real world application of the asparagus staging, the name itself is a creation by the players of KSP and not an official word used in rocket science. Because of the design it is also called “onion staging”.
See also
- Asparagus Staging Tutorial by Rureglathon
