Difference between revisions of "KerbNet"

Revision as of 16:51, 26 November 2016 (view source) Bvoice360 (talk | contribs) (Started off article) ← Older edit		Revision as of 17:03, 26 November 2016 (view source) Bvoice360 (talk | contribs) m Newer edit →
Line 1:		Line 1:
	{{Stub}}		{{Stub}}
−	'''KerbNet''' is an orbital scanning and mapping system introduced in 1.2. When accessed from a KerbNet-capable part, a window will appear, displaying topographic, biome or resource maps for the area under the craft depending on the selected mode and the technical capabilities of the part. The information given in the lower half of the window will change dependent on the mode, and is for the area covered by the target reticule, which can be moved by clicking anywhere on the map. Below the information is the FOV slider (essentially a zoom function), the waypoint naming box and the buttons 'waypoint' (which places a waypoint under the reticule) and 'refresh' (which updates the map for when the vessel has moved). Along the top are four additional buttons-(from left to right) the button to toggle between modes, a button to toggle the gridlines and reticule, the button to change auto-update frequency and the exit button.	+	'''KerbNet''' is an orbital scanning and mapping system introduced in 1.2. When accessed from a KerbNet-capable part, a window will appear, displaying topographic, biome or resource maps for the area under the craft depending on the selected mode and the technical capabilities of the part. The information given in the lower half of the window will change dependent on the mode, and is for the area covered by the target reticule, which can be moved by clicking anywhere on the map. Below the information is the FOV slider (which adjusts the "cone of view"-essentially a zoom function at higher altitudes), the waypoint naming box and the buttons 'waypoint' (which places a waypoint under the reticule) and 'refresh' (which updates the map for when the vessel has moved). Along the top are four additional buttons-(from left to right) the button to toggle between modes, a button to toggle the gridlines and reticule, the button to change auto-update frequency and the exit button.
	== Modes ==		== Modes ==
	=== Terrain ===		=== Terrain ===
Line 13:		Line 13:
−	Terrain Mode is the most basic of the three modes, displaying a simple monochrome elevation map of the surface directly under the craft-lighter areas are at a higher elevation, darker areas are lower. While not particularly useful on its own, Terrain Mode can be used to assess flat landing sites for craft, pick out areas at a high elevation for potential ΔV savings on subsequent takeoffs from atmospheric planets (notable [[Eve]]) and place waypoints for future reference and scan for anomalies without the clutter of Biome Mode.{{clear|left}}	+	Terrain Mode is the most basic of the three modes, displaying a simple monochrome elevation map of the surface directly under the craft-lighter areas are at a higher elevation, darker areas are lower. While not particularly useful on its own, Terrain Mode can be used to assess flat landing sites for craft, pick out areas at a high elevation for potential ΔV savings on subsequent takeoffs from atmospheric planets (notably [[Eve]]), place waypoints for future reference and scan for anomalies without the clutter of Biome Mode.{{clear|left}}
	=== Biome ===		=== Biome ===

---

Revision as of 17:03, 26 November 2016

This article is a stub. You can help KSP Wiki by expanding it.

KerbNet is an orbital scanning and mapping system introduced in 1.2. When accessed from a KerbNet-capable part, a window will appear, displaying topographic, biome or resource maps for the area under the craft depending on the selected mode and the technical capabilities of the part. The information given in the lower half of the window will change dependent on the mode, and is for the area covered by the target reticule, which can be moved by clicking anywhere on the map. Below the information is the FOV slider (which adjusts the "cone of view"-essentially a zoom function at higher altitudes), the waypoint naming box and the buttons 'waypoint' (which places a waypoint under the reticule) and 'refresh' (which updates the map for when the vessel has moved). Along the top are four additional buttons-(from left to right) the button to toggle between modes, a button to toggle the gridlines and reticule, the button to change auto-update frequency and the exit button.

Modes

Terrain

Terrain Mode is the most basic of the three modes, displaying a simple monochrome elevation map of the surface directly under the craft-lighter areas are at a higher elevation, darker areas are lower. While not particularly useful on its own, Terrain Mode can be used to assess flat landing sites for craft, pick out areas at a high elevation for potential ΔV savings on subsequent takeoffs from atmospheric planets (notably Eve), place waypoints for future reference and scan for anomalies without the clutter of Biome Mode.

Biome

Biome Mode is significantly different from Terrain Mode in that it presents you with a false-colour map of the biomes under the craft. This provides information pertaining to which biomes you are passing over, greatly easing the task of conducting biome-specific science experiments by informing you which biome you are currently over and which others are nearby or will be under the craft soon (assuming they are covered by the FOV) and highlighting where one ends and another begins (which is not always obvious).

Resource

Resource Mode (also known as Ore Mode) is a special function unique to the M4435 Narrow-Band Scanner. It displays the relative resource (ore) concentrations in a fashion similar to that of Biome Mode except that each biome is instead shaded according to its ore concentration. By default, a higher ore concentration is signified by a darker shade of purple, though there are three other colour schemes available-(brighter green=more ore), (green=low, yellow=medium low, orange=medium high, red=high) and (blue=low, pink=medium low, purple=medium high, red=high). This mode is useful for telling where to maximise the efficiency of mining operations by landing them in places with the most ore, sometimes in conjunction with the Surface Scanning Module.

Anomaly Detection

An additional feature of most KerbNet modules is the ability to detect anomalies. Features marked as 'anomalies' can be easter eggs, monoliths or even the Space Program's own DSN groundstations. The detection rate for these anomalies is dependent on the 'anomaly detection' stat for each module-for example, the Probodobodyne RoveMate will always immediately detect nearby anomalies while the M4435 Narrow-Band Scanner cannot detect them at all.

List of KerbNet Modules

There are a total of twelve KerbNet-capable parts, including all ten unmanned command modules. All of these modules require a CommNet link to Kerbin in order to be able to use KerbNet.

Image	Part	Radial size	Cost ()	Mass (t)	Scanning Modes	Min. FOV (°)	Max. FOV (°)	Anomaly Detection (%)
	Probodobodyne Stayputnik	Tiny	300	0.05	Terrain	25	45	0
	Probodobodyne QBE	Tiny	360	0.07	Terrain	13	72	18
	Probodobodyne OKTO	Tiny	450	0.1	Terrain	21	54	6
	Probodobodyne OKTO2	Tiny	1 480	0.04	Biome, Terrain	13	72	18
	Probodobodyne HECS	Tiny	650	0.1	Terrain	17	63	12
	Probodobodyne HECS2	Small	7 500	0.2	Biome, Terrain	9	81	24
	CH-J3 Fly-By-Wire Avionics Hub	Tiny	5 200	0.08	Terrain	10 (45)[Note 1]	20 (135)[Note 1]	24
	Probodobodyne RoveMate	Small	800	0.15	Biome, Terrain	5 (160)[Note 2]	10 (179.5)[Note 2]	100
	MK2 Drone Core	Mk2	2 700	0.2	Biome, Terrain	10 (45)[Note 1]	20 (135)[Note 1]	48
	RC-001S Remote Guidance Unit	Small	2 250	0.1	Biome, Terrain	9	81	24
	RC-L01 Remote Guidance Unit	Large	3 400	0.5	Biome, Terrain	5	90	30
	MPO Probe	Small	9 900	0.895	Biome, Terrain	3	84	35
	MTM Stage	Small	21 500	0.795	Biome, Terrain	20	55	5
	Mobile Processing Lab MPL-LG-2[Note 3]	Large	4 000	3.5	Biome, Terrain	17	63	0
	M4435 Narrow-Band Scanner	Radial mounted, Tiny	1 000	0.1	Ore	5 (160)[Note 2]	90 (179.5)[Note 2]	0

1. ↑ ^{1.0 1.1 1.2 1.3} Min/Max FOV increases when in atmospheric or suborbital flight
2. ↑ ^{2.0 2.1 2.2 2.3} Min/Max FOV increases when landed or splashed down
3. ↑ Requires a scientist