Difference between revisions of "Docking/ja"

Revision as of 03:41, 17 October 2014

ドッキングして燃料移動する2機の宇宙船。

Docking(ドッキング)は別々の機体を結合し、単一の機体として制御できるようにするための機能で0.18で実装された。ドッキング中は機体間でも動力源を移動することすることができる。

ドッキングするためには、まず距離をつめるためにランデブーを行う必要がある。

Using the docking controls

実装されたドッキングポート。

ドッキング操作に特化しているが必須ではない。

画面左下の薄紫の"Docking"ボタン(緑の"Staging"ボタンと青の"Map"ボタンの間)を押すことでドッキングモードに切り替えることが出来る。ドッキングモード中は主エンジンが停止され、WASDキーはRCSの並進運動制御に割り当てられる。このモードでは機体にRCSを搭載している必要がある。

接近した(そもそも接近するにはランデブーを参照。)機体とドッキングするには、まず両機を回転してドッキングポートを向かい合わせにする。パーツによってはカバーを展開する作業が必要あることには注意が必要である。またドッキングに気をとられてソーラーパネルの電力供給が断たれたりしないよう全てに気を配って下さい。

Right click the docking port on your ship and hit "control from here". Now activate docking mode. What is happening now is that docking port will be seen as the "center" of your ship. Activate RCS (the default key is R) and the controls will be very similar to the EVA controls. WS will be used to move forward and backwards, AD will be used to move left and right, ⇧ Shift and ^ Ctrl will be used to move up and down.

Once your docking ports are very close (or touching) they will magnetically clamp to each-other and you will have successfully docked. The tolerance for the clamps is quite generous, however, it can take some time for it to kick in - so once you get your ports in close proximity, just wait a bit before trying to get any closer (and possibly damage your ships). If your ports stick together, but don't actually dock, try turning the SAS off: it might be preventing your ship from turning a crucial few degrees.

Note that you don't have to be in docking mode to dock - if you manage to align your docking ports using the regular controls, everything will still work.

While docked, you can transfer resources (fuel, etc.) by clicking on a tank, and then Mod+right click on another target and pressing the desired In/Out switches of the windows that pop up.

As of 0.24.2^[outdated], Kerbanauts have to be transferred manually using EVAs.

To undock simply right click either of the docking clamps and click undock. In order to facilitate separation, the magnetic clamping feature is turned off when undocking is executed. Once the ships have separated (about 5-10m) the magnetic clamping feature will automatically reset.

Docking ports

There are five docking ports available for different sizes and docking directions. In order to dock two spacecrafts, both must be equipped with docking ports of equal size. When constructing a spacecraft, another part which is not a docking port can be placed on it. That part can then be undocked, but not redocked.

• Clamp-O-Tron Jr. is the tiny port.
• Clamp-O-Tron Docking Port is the small port.
• Clamp-O-Tron Sr. Docking Port is the large port.
• Clamp-O-Tron Shielded Docking Port is a small port (compatible with the Clamp-O-Tron Docking Port) covered by a retractable shield. This is meant to protect the port from atmospheric friction, but KSP does not implement the damaging effects of that friction as of 0.24.2^[outdated]. The port's cover must be opened before it can be used for docking.
• Inline Clamp-O-Tron is a small port mounted within a recessed bay in a cylindrical fuselage. This allows the port to be hidden within a stack of small parts. The port's cover must be opened before it can be used for docking.

多ポート並行ドッキング

A triple-connection between two sections of a large vessel

Unfortunately, docking ports are not very rigid. This makes crafts which consist of multiple large sections very difficult to control. To mitigate this problem, you can use bi- or tri-couplers to mount multiple docking ports. The resulting multi-part connection is a lot more stable. Unfortunately docking these crafts is even more difficult than docking with a single-port connection, because now you also have to take care of the rotation of your craft. Otherwise it can happen that only one port connects. Should this happen, undock your craft and try again. Sometimes when using tri-couplers, it can happen that even though the orientation is perfect, only two ports are actually connected. You can tell by right-clicking the ports. When none of two ports has an "undock" option, they are not actually connected. This problem can be solved by going to the space center and reloading the ship.

Additionally, it is recommended to control a multi-part craft from the command pod closest to the center of mass of the whole contraption. In that case the direction on the navball is affected the least by the ends of the craft wobbling around.

Alternatively, since バージョン 0.20, Clamp-O-Tron Sr. Docking Ports have become a better way of keeping two large ships together than triple docking small Clamp-O-Tron Docking Ports, seeing as they cover the same area, but only need one attempt to completely dock together. However, docking together several very, VERY large ships together will require using several Clamp-O-Tron Sr. Docking Port anyway. Keep in mind larger ships will increase part count, and lag as a consequence.

It is possible to establish a multi-port connection without using a multi-coupler, but great care must be taken in the VAB when manually placing ports for this purpose.

Possibilities for docking

Various new abilities arose with the introduction of docking.

In-orbit refueling

A large rocket, such as an interplanetary rocket, may run out of fuel before leaving Kerbin's sphere of influence. When this happens, some tankers can be sent into orbit, dock and then transfer fuel from the tanker to the rocket. In order to start the refueling Mod+right click must be pressed on the two tanks that should send/receive fuel, and click on the appropriate panel that appears.

If you need to refuel frequently, you may consider building a large orbital tanker, or a space station with one.

In-orbit spacecraft assembly

A 3-component ship in low kerbin orbit

There is a limit of how large rockets can be built in the Vehicle Assembly Building. What does one do to fix this? Dock multiple crafts together to create a larger rocket! The cancelled Constellation program by NASA was planning to use this method for manned missions to the Moon and Mars.^[1]

Note though that currently (as of 0.21.1) docking connectors are a bit wobbly, so ships from too many too heavy components will be hard to control. Docking ports can even rip off when put under too much stress. This problem can be mitigated by using multiple docking ports on bi- or tri-couplers (see above). A mod which offers a different workaround for this problem is the Quantum Strut mod. Or, one can use time warp to force-stop all rotation, wobbling, and such. Note, this may not work every time.

Detachable landing crafts

A vessel with a detachable lander

This method was used during the human moon landings,^[2] and it can be equally useful for the Kerbal. When you do a landing mission and have the intention of getting back to Kerbin, don't take all the fuel for the return flight to the surface of whatever planet you are visiting. Undock a lander with just enough fuel to get to the surface and back, and redock it with the return stage when it's back in orbit. You can save a lot of fuel that way, because the lander doesn't need to carry all the return fuel to the surface and back into orbit.

Small in-game computer systems

Docking Ports can also be used to create limited orbital computers.^[3]

小惑星捕獲

→ 参照： Capturing asteroids section in asteroid article

Capturing asteroids is similar to docking, with only a few differences. Because a Advanced Grabbing Unit needs to be used it an asteroid can be docked from any direction and does not require a counterpart. But an asteroid can't manoeuvre on its own, so only the ship which wants to grab the asteroid can do the manoeuvres. Asteroid cannot be captured using a docking port.

関連項目

• Basic Docking tutorial

参考文献

1. ↑ Constellation program of NASA
2. ↑ Apollo program of NASA
3. ↑ “KSP computer dev team” in the forums