KAL-1000 Controller
 | Available only with the Breaking Ground Expansion installed. |
| KAL-1000 Controller | ||
 | ||
| Robotic controller by Moving Parts Experts Group | ||
| Radial size | Radial mounted | |
| Cost | (total) | 1 000.00 
|
| Mass | (total) | 0.010 t [1] |
| Drag | 0.2 [1] | |
| Max. Temp. | 2000 K | |
| Impact Tolerance | 8 m/s | |
| Research |  Advanced Electrics
| |
| Unlock cost | 8 000
| |
| Since version | 1.7.1 | |
| Part configuration | KAL1000.cfg | |
| Electricity required | 0.1 ⚡/s | |
| Packed volume | 20 l | |
| Stacking capacity | 2 units | |
| ||
The KAL-1000 Controller is the first micro-controller part added to the game. It allows physical actions by parts to be automated.
Product description
| “ | A first of its kind, this intelligent programmable controller can manage a number of parts across a vessel. Its not an entirely autonomous entity... yet... — Moving Parts Experts Group |
” |
Usage
When added to an assembly, new action groups appear, one per controller. When the action group is selected, part actions can be added to the group actions field, like usual, but a new option "Open Track Editor" is available. When an appropriate action is added (indicated by the heading in the Selection field, "Axis Fields"), the Track Editor will display a graph control panel defined by a time x-axis and a min/max y-axis with a spline indicating the status of the part. By using the interface to add discrete adjustable points, the spline can be manipulated to create a motion/magnitude frequency for the part.
An example: the SC-9001 Science Jr. has one “Axis Field,” one that controls its doors. Once added to the KAL-1000 Controller action group, the Track Editor will create a graph controlling the state of the SC-9001 Science Jr. doors. By setting an amount of time (maximum 100 seconds) and dropping 3 points onto the spline in the Track Editor interface, the SC-9001 Science Jr. can be set to open its doors halfway, then close them, then open the doors all the way, then close them at chosen time intervals. When launched and the KAL-1000 Controller activated, the SC-9001 Science Jr.’s doors will follow this pattern over and over, until the controller is deactivated.
Controller Priority
Controller priority does nothing if you only have one controller. Otherwise, they obey these undocumented rules:
- Paused controllers are ignored. An active low-priority controller will "win" over a paused high-priority controller.
- If two or more active controllers are controlling the same part, the highest-priority controller wins outright. Other controllers are ignored.
- If two active controllers have the same priority controlling the same part, their output is averaged.
It is important to not let your controllers become paused if you wish priority or averaging to occur.
KAL overclocking
By forcing the spline in the KAL editor to go outside the normal range, you can input extreme values into parts. This can be used to make engines produce more thrust, make robotic parts rotate faster or extend farther, change fireworks to have huge explosions or launch distances, and more. For instance, using KAL overclocking and Fireworks, you can reach absurd speeds, sometimes faster than light itself.[1]
Changes
- Initial Release
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
