Science

A lander on Duna to gather scientific data

An image of the GUI after doing an EVA report

Science, sometimes called science points, is needed to unlock new parts in the technology tree when playing in the Career or Science modes (Sandbox starts with all parts unlocked). Science is obtained by performing different scientific activities in different situations and biomes (where available), then either returning to Kerbin or transmitting the activity data home with an antenna.

In addition to the facts collected on this page, you can follow this beginner-friendly Science tutorial.

Situations

Situations reflect the flight status of your craft or kerbonaut relative to a celestial body. There are six possible situations, some of which may be irrelevant to a given science activity or unavailable on a given celestial body.

• SrfLanded: in contact with the terrestrial surface
• SrfSplashed: in a liquid body on the surface (such as oceans)
• Flying Low: above the surface at any height, if and only if an atmosphere is present
• Flying High: in the upper atmosphere, if and only if an atmosphere is present
• In Space Low: above the surface at any height and not in an atmosphere
• In Space High: high above the surface and any atmosphere but still in its SOI

An atmosphere is required for the situations "Flying Low" and "Flying High" and for using the PresMat Barometer and the Sensor Array Computing Nose Cone. Also, KSP only considers a craft (or Kerbal) to be flying in an atmospheric region if it is on a sub-orbital trajectory. For example, taking readings while aerobraking in the upper atmosphere will return data for the "In Space Low" situation instead of "Flying High" even if the altitude is below the edge of space.

Biomes

Biomes are areas of a body's surface specially mapped in KSP game data. Each additional biome grants a separate set of opportunities to do Science Activities, provided the Activity is biome-dependent in the given Situation.

Currently only the planet Kerbin and its moons, Mun and Minmus, are fully detailed with biomes, but squad has said it will included biomes for other bodies (presumably after scope completion).

Activities

This is an overview of all science activities which can be performed and how results differ by biome and situation. Activities performed within one sphere of influence(SOI) have no effect on the Science Points that can be earned doing science activities within the SOI of any other celestial body.

Possible combinations of Activity, Situation, and Biome

The top row of the chart names each Activity; the left hand column shows the six possible Situations.

Each intersection shows whether the Activity is possible for a given Situation and, if so, whether it differs by Biome or gives one Global result for the entire celestial body.

Activities and situations requiring an atmosphere are italicized and colored.

	Kerbonaut		Capsule	Modules
	Surface Sample	EVA Report	Crew Report	Mystery Goo™ Containment Unit	SC-9001 Science Jr.	2HOT Thermometer	PresMat Barometer	GRAVMAX Negative Gravioli Detector	Double-C Seismic Accelerometer	Sensor Array Computing Nose Cone
Surface: Landed	Biome	Biome	Biome	Biome	Biome	Biome	Biome	Biome	Biome	Biome
Surface: Splashed	Biome	Biome	Biome	Biome	Biome	Biome	Biome	Biome	—	—
Flying Low	—	Biome	Biome	Global	Global	Biome	Global	—	—	Biome
Flying High	—	Global	Global	Global	Global	Global	Global	—	—	Biome
In Space Low	—	Biome	Global	Global	Global	Global	—	Biome	—	—
In Space High	—	Global	Global	Global	Global	—	—	Biome	—	—

Crew

The following Activities are performed by Kerbals during an EVA or from within a crewed command module.

Surface Sample

Requires	One kerbonaut
Base value	30
Maximum value	40
Data scale	1
Transmission efficiency	25%
Processing bonus	+12%
Processing energy	300 E

Surface Samples can be taken by kerbonauts when performing an EVA on the ground or in water of a celestial body. The results vary by biome and are different while swimming within the biome too.

EVA Report

Requires	One kerbonaut
Base value	8
Maximum value	8
Data scale	1
Transmission efficiency	100%

EVA Reports are done by kerbonauts on an EVA. Like crew reports they give different results depending on altitude and biome (if performed low enough). Only one EVA Report per biome/situation combination is necessary. The easiest ways to take a Flying Low report are to jump from the surface, or hang onto a ladder whilst landed.

A kerbonaut can only take and hold one EVA Report at a time without storing it in a Command Pod, though reports retrieved from a Command Pod have no limitations on how many of a type can be carried.

Crew Report

Requires	A manned command pod
Base value	5
Maximum value	5
Data scale	1
Transmission efficiency	100%

Crew Reports can be created in any manned command pod. Reports uniquely differ between celestial body and situation. Because the transmission efficiency is 100%, repeating them or transmitting them multiple times yields no additional Science.

If a command pod has taken a Crew Report but not transmitted it, it cannot take a new report even when in a new situation, biome, or sphere of influence. This limitation can be circumvented by having a kerbonaut on EVA "take data" from the command pod. Even if they store the data in the same command pod it was taken from, the Crew Report will be treated as just another piece of data to store. A second Crew Report can be taken even in exactly the same spot; no additional points are yielded by duplicate Crew Reports though.

Modules

Experiments done by separate parts like the Mystery Goo™ Containment Unit behave similarly to Crew Reports. They may be performed in different flight phases and on different celestial bodies returning different results. Each module can only store one result at a time, but a result can be sent home with an antenna to allow the experiment to be performed again under the same or under new conditions. Data can also be extracted from the module by a kerbonaut during an EVA. There is a penalty for transmitting data home instead of recovering the module to Kerbin.

Since version 0.23, transmitting or collecting data renders the Mystery Goo™ Containment Unit and SC-9001 Science Jr. disabled for the remainder of a flight. If the craft has (or can be docked with) a fully crewed lab, it can reset those modules at a cost of time and electric charge.

Table of science modules

Experiment	Mystery Goo Observation	Materials Study	Temperature Scan	Atmospheric Pressure Scan	Seismic Scan	Gravity Scan	Atmosphere Analysis
Required part (tech tree lvl)	Mystery Goo™ Containment Unit (2)	SC-9001 Science Jr. (4)	2HOT Thermometer (5)	PresMat Barometer (6)	Double-C Seismic Accelerometer (7)	GRAVMAX Negative Gravioli Detector (8)	Sensor Array Computing Nose Cone (8)
Base value	10	25	8	12	20	20	20
Maximum value	13	32	8	12	22	22	24
Data scale	1	1	1	1	2.5	3	10
Transmission efficiency	30%	20%	50%	50%	45%	40%	35%
Processing bonus	+15%	+10%	+25%	+25%	+22%	+20%	+17%
Processing energy (E)	100	250	80	120	500	600	2000

The transmission efficiency caps the maximum returnable science with the experiment via antennae. To gather all scientific value experiments needs to be recovered.

Craft recovery

Recovering a craft after it landed on Kerbin also yields science points by itself. Its value depends on how far the craft flew. Recovering a craft after a suborbital flight returns less valuable (but different) results than one which orbited the Mun, for example.

The returned value appears to be 5 * (surfaces visited + bodies orbited).

Celestial body multipliers

Each celestial body has different multipliers applied to the collected scientific data, based upon where it is taken in relation to that body. Biomes do not affect these multipliers.

The altitudes given in this table determine the altitude above mean sea level of the boundary between lower and upper atmosphere and between near and outer space. The upper atmosphere extends to the atmospheric height and the outer space extends up to the end of the sphere of influence.

	Surface		Atmosphere		Space
Celestial body	Landed	Splashed	Multiplier	Border	Multiplier	Border	Recovery
Kerbol	N/A	N/A	1×	1×	18 km	600 km	11×	2×	1000 Mm	4×
Moho	10×	N/A	N/A	N/A	N/A	N/A	8×	7×	80 km	7×
Eve	8×	8×	6×	6×	22 km	90 km	7×	5×	400 km	5×
Gilly	9×	N/A	N/A	N/A	N/A	N/A	8×	6×	6 km	6×
Kerbin	0.3×	0.4×	0.7×	0.9×	18 km	70 km	1×	1.5×	250 km	1×
Mun	4×	N/A	N/A	N/A	N/A	N/A	3×	2×	60 km	2×
Minmus	5×	N/A	N/A	N/A	N/A	N/A	4×	2.5×	30 km	2.5×
Duna	8×	N/A	5×	5×	12 km	50 km	7×	5×	140 km	5×
Ike	8×	N/A	N/A	N/A	N/A	N/A	7×	5×	50 km	5×
Dres	8×	N/A	N/A	N/A	N/A	N/A	7×	6×	25 km	6×
Jool	N/A	N/A	12×	9×	120 km	200 km	7×	6×	4 Mm	6×
Laythe	14×	12×	11×	10×	10 km	50 km	9×	8×	200 km	8×
Vall	12×	N/A	N/A	N/A	N/A	N/A	9×	8×	90 km	8×
Tylo	12×	N/A	N/A	N/A	N/A	N/A	10×	8×	250 km	8×
Bop	12×	N/A	N/A	N/A	N/A	N/A	9×	8×	25 km	8×
Pol	12×	N/A	N/A	N/A	N/A	N/A	9×	8×	22 km	8×
Eeloo	15×	N/A	N/A	N/A	N/A	N/A	12×	10×	60 km	10×

Science Archives

The Science Archive

You can access a filterable list of the science you have performed so far through the “Science Archive” tab in the Research and Development window.

The entries show you what data you have brought back and whether you would get more data from repeating Activities (if the bar below an experiment is not completely full, as shown in some of the examples on the right, the experiment can be repeated to gain additional science). This is also useful to see what Biomes and Situations you have yet to investigate, thus where your richest opportunities are.