Radial size
The radial size is the diameter or mounting position for most parts. If the mounting position is not radial, then the part is either round or one of two special forms. Such rectangular parts as the M-1x1 Structural Panel lack a radial size or it's a size to the next bigger diameter like the Probodobodyne QBE. Four radial sizes exist with varying names. The size scale looks like the internal definition as the Mk2 to size 1 Adapter uses this term and starts with 0 and many values in computer programming are starting from 0 rather than 1.
Any stackable part can be connected to any other stackable part. Matching radial sizes only serves to give a rocket a cleaner visual appearance, and several adapter parts exist to allow transitions between radial sizes while maintaining an unbroken surface.
Sizes
| Radial size | Fuel per m | Typical crash tolerance | Typical maximum temperature | ||
|---|---|---|---|---|---|
| Rocket fuel | Liquid fuel | Monopropellant | |||
| Tiny / 0.625m | 115 | n/a | 213 | 6 m/s | 2000° |
| Small / 1.25m | 213 | n/a | 438 | 6 m/s | 2000° |
| Large / 2.5m / Rockomax | 853 | n/a | 750 | 6 m/s | 2000° |
| Extra Large / 3.125m / Kerbodyne | 1925 | n/a | n/a | 6 m/s | 2000° |
| Mk1 | n/a | 80 | n/a | 20 m/s | 2000° |
| Mk2 | 213 | 213 | 213 | 40 m/s | 2200° |
| Mk3 | 1000 | 1000 | 1000 | 50 m/s | 2300° |
Rocket
The typical mass ratio for rocket fuel is 9.
- Tiny / 0.625m. Typically used for probes and nose electronics.
- Small / 1.25m. The most common size, and the primary size available at the beginning of the game.
- Large / 2.5m / Rockomax.
- Extra Large / 3.75m / Kerbodyne.
Spaceplane
Spaceplane parts may carry either rocket fuel or liquid fuel. Compared to rocket parts they tend to have a poorer mass ratio (usually about 8), but better crash tolerance and maximum temperature.
- Mk1. Like the 1.25m rocket size, this size is a cylinder. All inline air intakes are of this size, but there are no rocket fuel tanks.
- Mk2. With its side chines, this spaceplane size is reminiscent of the real-world Lockheed SR-71 Blackbird. It is between the 1.25m and 2.5m sizes in cross-sectional area. These parts feature a small amount of lift.
- Mk3. Reminiscent of the real-world Space Shuttle. The cross-sectional area is similar to the 3.75m rocket size.
Adapters
| Fore size | ||||||||
|---|---|---|---|---|---|---|---|---|
| Nose | Tiny | Small, Mk1 | Mk 2 | Large | Mk 3 | Extra Large | ||
| Aft size | Tail | n/a | ||||||
| Tiny | ||||||||
| Small, Mk1 | FL-A10 Adapter FL-A5 Adapter NCS Adapter |
TVR-200 Stack Bi-Coupler (2) TVR-1180C Mk1 Stack Tri-Coupler (3) TVR-2160C Mk2 Stack Quad-Coupler (4) |
Mk2 Bicoupler (2) | TVR-200L Stack Bi-Adapter (2) TVR-300L Stack Tri-Adapter (3) TVR-400L Stack Quad-Adapter (4) |
||||
| Mk2 | Mk2 to 1.25m Adapter Mk2 to 1.25m Adapter Long |
|||||||
| Large | C7 Brand Adapter - 2.5m to 1.25m C7 Brand Adapter Slanted - 2.5m to 1.25m Rockomax Brand Adapter |
2.5m to Mk2 Adapter | ||||||
| Mk3 | Mk3 to Mk2 Adapter | Mk3 to 2.5m Adapter Mk3 to 2.5m Adapter Slanted |
||||||
| Extra Large | Kerbodyne ADTP-2-3 | Mk3 to 3.75m Adapter | ||||||
Assets
When creating assets, the correct diameter for a desired model can be found in the table below. The "meter scale" refers to the actual model's diameter, which is then typically scaled up via the default rescaleFactor of 1.25, to give the "actual" in-game diameter. Size scale is used to denote the standard when selecting a node size.
| Name | Size scale | Meter scale | Actual size | Example |
|---|---|---|---|---|
| Tiny | 0 | 0.5 m | 0.625 m | Rockomax 48-7S |
| Small | 1 | 1 m | 1.25 m | LV-T30 Liquid Fuel Engine |
| Large | 2 | 2 m | 2.5 m | Rockomax "Mainsail" Liquid Engine |
| Extra large | 3 | 3 m | 3.75 m | Kerbodyne KR-2L Advanced Engine |
As a special radial size Radial mounted appears. Parts like Rockomax 24-77 so lack general metric counterparts as to eliminate confusion.
Non-cylindrical sizes named “Mk2”, and “Mk3” exist and are used by fuselage parts intended for spaceplanes.
Additional sizes
Several addons add additional, usually larger, radial sizes which are roughly following the stock size scale. There are up to 9 meter parts in the B9 Aerospace mod and mods like Tweakscale can scale parts more freely.
