Mk2 to 1.25m Adapter
|Mk2 to 1.25m Adapter|
| Liquid fuel tank by |
C7 Aerospace Division
|Radial size||Small, Mk2, Radial mounted|
|Max. Temp.||2500 K|
|Impact Tolerance||50 m/s|
|Unlock cost||14 600|
|Part configuration|| standard.cfg|
|“|| Generic Mk2 to Mk1 adapter.
— C7 Aerospace Division
The Mk2 to 1.25m Adapter is used to provide a seamless connection between Mk2 and 1.25m parts, allowing parts such as engines, fuel tanks, reaction wheels, or command modules to be attached to a Mk2 craft (such as a spaceplane). It also serves as an attachment point for wings, fins, and landing gear; however, its angled sides may cause alignment issues.
Because the Mk2 to 1.25m Adapter is a Mk2 part, it can act as a wing by providing a lifting surface. However, it provides less lift than a true Mk2 fuselage, such as the Mk2 Rocket Fuel Fuselage Short.
The Mk2 to 1.25m Adapter is also a rocket fuel tank containing liquid fuel and oxidizer. It can be used to power liquid fuel rocket engines, like the LV-909 "Terrier" Liquid Fuel Engine. It can be placed both in-line and radially mounted.
When full, one tank can power a single LV-909 "Terrier" Liquid Fuel Engine for up to 112.8 seconds at full thrust, or a single closed-cycle CR-7 R.A.P.I.E.R. Engine for up to 33.2 seconds at full thrust.
- The Mk2 to 1.25m Adapter was originally developed for the C7 Spaceplane pack, and has become a stock part since version 0.15 and the introduction of the Spaceplane Hangar.
- New model and texture
- Initial release