FAQ/ja

このページではKSPに関してよくある質問(frequently-asked questions)を一覧にしています。

気軽に追記・更新してください。

はじめに

Kerbal Space Programはどこで手に入る?

公式サイトで有料版・デモ版ともに提供されています。またSteamでも取り扱っているのでSteamアカウントをお持ちの方はこちらからでも良いでしょう。

有料版とデモ版は何が違う?

デモ版は無料配布されている代わりに多くのコンテンツが欠けています。デモ版で利用できるのは限られたパーツのみで有料版より圧倒的に少ないです。航空機組立棟と滑走路も使用できず、Kerbinと衛星Mun、太陽以外の天体は実装されていません。デモ版は古いバージョンを元にされているため、有料版に実装された便利な機能や修正も含まれていません。どんなゲームかを感じ取ることはできますが、有料版にはそれ以上であることを忘れてはいけません。値段以上の価値はあります。信じてください!

この先どう変わっていくの?

追加予定機能リストを参照してください。

技術的な質問

必要なスペックはどのくらい?

System Specsを参照してください。

ダウンロードファイルが壊れている!

ダウンロードしたファイルが破損して解凍できない場合は以下のことを試してください。:

ダウンロードツールを使用しない。これらのツールはダウンロードデータをめちゃくちゃにすることで有名です。

ブラウザのキャッシュや一時ファイルをクリアする。

別のブラウザを使用する。

You can verify your downloads by comparing the checksums.

Usually downloading again works if these options fail.

セーブデータや機体データがロードできない!

アップデートによりセーブデータや.craftファイルが破壊されることがあります。もしデータが自身のものでなければ配布元とバージョンが一致しているか確認してください!ご自身のデータの場合は動作していたバージョンまで戻してください。

セーブデータや機体に含まれるアドオン(MOD)が全てインストールされているか確認してください。MODはCURSEまたは各フォーラムで配布されています。MODの更新(特にパーツが削除された場合)によって機体データの破損が起こりえることは気に留めておいてください。該当するパーツを持つ機体にフォーカスを切り替えるまで発覚せず、切り替えた途端に機体が分解することもあります。

MODの導入によってKSPオリジナルのファイルが破損していないか確認してください。破損しているか判断がつかない場合はKSPを再インストールしてください。

補足: オリジナルのKSPフォルダとセーブファイルのバックアップを日頃からとっておいて下さい!

メインメニューで"Resume Saved"をクリックしても何も起きない!

この症状は大抵、破損したセーブファイルが原因です。KSP/saves(インストールフォルダ内のsaves)フォルダを開き、中にあるフォルダを全て一度別の場所(scenariosやtraining以外)に移動してください。それから空になったsavesフォルダに一つフォルダを戻してはゲームを起動して確認する作業を繰り返してください。症状が再発した直前に追加したフォルダが原因の破損データです。該当するセーブデータは失われることになりますが、諦める前に試せる方法が2つあります。

Replace the current state with that of a quicksave or autosave: Go into the folder for the corrupted save (KSP/saves/SAVENAME) and rename the persistent.sfs file to persistent2.sfs, so KSP will ignore it. Then rename quicksave.sfs to persistent.sfs. This will reset your current progress to that of the last quicksave or autosave. If the save file still won't load, your current missions can't be recovered, unless you know how to repair the files manually.
Copy the crafts from the corrupted save to another one: Go to the Ships folders in the corrupted and an intact save's folders. Then copy the contents of the SPH and VAB folders from the corrupt save to the corresponding folders of the intact save. You should then be able to load the crafts in the intact save file.

Remember that multiple saves could be corrupt, so you might have to repeat the procedure!

VABやSPHで"Load"ボタンを押しても何も起きない!

This is also caused by corrupted files. You will have to follow a similar procedure as described above:

Go to the craft folder of the save on which the problem occurred (KSP/saves/SAVENAME/Ships) and you will find two folders: VAB (Vehicle Assembly Building crafts) and SPH (Spaceplane Hangar crafts). Move all the .craft files from the folder in question somewhere else, then move them back one at a time, and see if the button works again. If it does not, the last file you copied is corrupt and you will have to delete it, unless you know how to fix it manually.

Remember that there could be multiple corrupted files, so you might have to repeat the procedure.

KSPの旧バージョンは入手できる?

はい、最新版と同時に直前の安定版がKSP storeのプロフィールページからダウンロード可能になってます。それ以前のバージョンはダウンロードすることが出来ません。

ゲームプレイ

全般

操作方法一覧はありますか?

Key bindingsを参照してください。

How do I get things into orbit/land on a planet?

See our Tutorials for more info.

Can I change the order of the stages?

Yes, just drag the stage or the part where you want. As of 0.18, you can now do this in flight as well as in the VAB.

What's the difference between S.A.S and Advanced S.A.S?

Since バージョン 0.21 there has been no difference between them. The previous function of ASAS,to hold the heading, was moved to the SAS while the SAS instead became reaction wheels which provide torque. Like before with ASAS, only one SAS module per ship is required, its performance depends on amount and positioning of the control systems like RCS.

Why do parts of my rocket fall when I launch it?

Your rocket may have too much weight being supported by a weak joint. Make sure that every part of your rocket is resting on something strong enough to hold its weight, or that it is supported by enough connections to keep it in place.

Tip: Connect parts together with EAS-4 Strut Connector to strengthen your rocket.

Can I take screenshots of the game?

Yes! Pressing F1 will take a screenshot of the current scene. The screenshots will be saved in a folder called "Screenshots" that is located in the root folder of your KSP install.

Tip: Toggle the marks of ships with F4 or toggle the entire UI with F2 to take less cluttered screenshots.

How can I recover ships/Kerbonauts that have safely landed after a mission?

The altimeter with the recovery button above it

After a successful flight mission and landing back on planet Kerbin, you can:

Move the mouse over the altitude meter, then click the green Recover button that shows up.

Or:

Return to the main Kerbal Space Center view.

Select the Tracking Station (building near the bottom right).

Select the completed flight mission from the left.

Click on the Recover button near the bottom left.

Why I can't activate the next stage?

There are several reasons this might happen:

You have locked the stages by pressing Mod+L. Press it again to re-enable staging.

You're in Docking Mode.

There isn't any active command pod. If it's an unmanned ship, it may have run out of electric charge. If it's a manned ship, the crew may have all exited the vehicle.

Your mouse is hovering over the staging viewer and editor on the left.

You're in Time Warp.

Why I can't control the ship anymore?

Please check if:

There isn't any active command pod. If it's an unmanned ship, it may have run out of electric charge. If it's a manned ship, the crew may all have exited the vehicle.

You're in Time Warp.

There isn't enough electric charge for reaction wheels.

You've run out of monopropellant for the RCS thrusters.

Your ship is completely destroyed. (I'm sorry for that.)

Why I can't do the Time Warp/save the current progress?

Please check if:

The throttle is not at 0%. Press ^ Ctrl to gradually lower it, or X to drop it to 0% immediately.

Your ship is spinning too fast.

You're flying in atmosphere.

You're moving over the terrain.

Your ship is completely destroyed. (I'm sorry for that, once again.)

飛行

How do I stabilize the ship?

The easiest way is to enable SAS. Press T to toggle it on; it will gradually stop your ship from spinning. You can also hold F to momentarily enable SAS.

You must have some electric charge available for SAS to function.

How do I use RCS?

See RCS for the basics.

How do I transfer fuel between tanks?

Hold the modifier key and right click the two tanks. You can then click In or Out on either tank to specify the direction of fuel flow.

Tip: Remember that liquid fuel and oxidizer are two separate resources and must both be transferred together.

Tip: Transferring will not be available if you select more than two tanks, or tanks containing different types of fuel.

Can I use Physics Warp while in space?

Yes. You can toggle the Physics Warp by pressing Mod+, and Mod+..

Tip: Physics warp can make your spacecraft more fragile. Be careful when using it with engines throttled up.

Can the object filter in Tracking Station be shown in Map View?

Yes. Move the mouse to the top of the screen and it will drop down.

Can I filter for multiple types of objects at the same time?

Yes, you can right-click the filters to select more than one of them.

Can I rename a vehicle?

Right-click an active command module, then click "Rename Vehicle". You'll be able to change the name and the type of this vehicle.

Why doesn't the orientation of the navball follow what I want it to be?

The direction of the navball depends on which part of the ship you are controlling it from. You can change it by right clicking any command module or docking port then clicking "Control from Here"; the navball will then point in the same direction as the selected part. If you have tried all the command modules and docking ports and none of them have the orientation you want, then you must go back to the VAB or SPH and add a new one to allow it (Sorry!).

Can I see the ship at different angles?

By right clicking and drag you can make the camera orbit the ship, and by middle clicking and drag you can change the direction of the camera within a limited range.

Press V to change the camera mode (Auto/Free/Orbit/Chase). Press C to switch between external view and IVA view.

How do I make Flight Planning more precise during interplanetary transfer?

You can try opening settings.cfg in game folder with Notepad and change "CONIC_PATCH_DRAW_MODE = 3" to "CONIC_PATCH_DRAW_MODE = 0". This will make each trajectory drawn at the current position of celestial bodies, so that you can focus the celestial body you're planning to reach.

As of バージョン 0.23.5 this has been exposed as part of the stock game. If you change your focus to a body whose SOI you will enter in the future (double-click on it, or press Tab ↹ repeatedly) you will see the trajectory your craft will follow once it arrives. You can return focus to your ship by pressing ⌦ Delete.

Can trajectory prediction work with more SOI changes?

Open settings.cfg with Notepad and change "CONIC_PATCH_LIMIT = 3" to a higher value. Due to the limits of the game's mathematics, orbit predictions beyond 3 SOI changes will be less accurate than nearer ones.

地上

Why does my rover "lift itself" in low-gravity environments?

In low gravity, the powerful motors on rover wheels can exert so much force that they kick the wheels out from under the vehicle. Wheelies are all too easy in low gravity!

Accelerate and brake carefully, with short taps of the forward and backwards keys, to avoid this.

Don't turn too sharply at high speed or the rover may tip over. Slow down before turning, or turn more gradually.

One other cause of rover flipping is activating reaction wheels while driving. You can make reaction wheels no longer work by doing any of the following actions:

Switch to Docking Mode;

Disable SAS.

Right click the parts with reaction wheels, then click "Toggle Torque".

Rebind the rover control keys away from the attitude control keys. Enter the Main Menu, click Settings, then Input, then Rovers. Change the controls of rovers from WSAD to something other, like IKJL.

Why do the wheels of my rover break?

It's because your velocity over surface is beyond the maximum velocity of the wheel, or your wheel hit the ground too hard.

You can repair the wheel by walking a Kerbanaut near it, then right clicking on the wheel and clicking "Repair Wheel".

EVA

I'm floating away into space! How do I get back inside the ship?

Press R to activate your kerbonaut's RCS backpack; the proper keys will now make the kerbonaut move in each of the cardinal directions. Each manned command module has a hatch and small ladder mounted on one side; find where it is and carefully fly towards it. Once the kerbonaut is within a meter or so of the hatch, a prompt will appear to press F; press it and he should do so. Sometimes pressing F will just make him grab the ladder and not go inside; press F again to finish boarding or move along the ladder until the boarding prompt appears.

Why does my Kerbal always walk with the back to the camera?

Press Mod to switch to free-walking mode.

Can Kerbals jump in different directions when on ladders?

Press ⇧ Shift + (WSAD) + Space. Press ⇧ Shift+Space to jump backward, ⇧ Shift+A to jump to the left, etc.

How can I orient Kerbals to the direction of camera?

Make sure the jet pack is activated, then press Space.

Why do some Kerbals laugh during the entire mission, while others panic easily?

Each Kerbal is rated on his "courage" and "stupidity"; the different levels of each attribute determine his reaction to flight events. Some, such as Jebediah, are also considered "badass" and will laugh in the face of all but the biggest calamities. (This is controlled by a secret flag named "badS" in the configuration files behind the scenes.)

VAB/SPH

Can I undo/redo my actions?

Yes, by pressing ^ Ctrl+Z and ^ Ctrl+Y.

Can I rotate the parts?

Yes, by pressing QEWSAD you will be able to rotate parts by 90° and by pressing ⇧ Shift + (QEWSAD) you will rotate parts by 5°.

All right, I know you haven't read Key bindings.

How do I transfer a craft between the VAB and the SPH?

The .craft files you made are located in \saves\*The name of the save*\Ships\VAB and \saves\*The name of the save*\Ships\SPH. Any .craft file in these two folders will be shown in corresponding buildings, no matter what type it is. As for the type, you can edit the file with Notepad, change "type = VAB" or "type = SPH" to change the type of the craft permanently.

As of バージョン 0.22, you can also use the subassembly system to move part groups, including nearly-complete craft, between the two areas.

Development Related

What happened to Experimental Releases?

In order to improve quality, Squad has created an internal team of community members hand-picked for their ability to post useful bug reports. Experimental releases are now only available to this team.

How can I join the Experimental team?

Community members are chosen by Squad, so one cannot join the team by asking. Having a knack for posting informative, clear bug reports with reproduction steps, logs, version of the game, etc. will definitely help your chances, though.

I think I've found a bug!

In a piece of software so early in development as KSP, it's very likely there will be bugs in the program. If you've found something that can potentially be a bug, you can report it to the Dev team on the Squad Bugtracker. To make your report easier to identify as a bug, please follow the Guidelines to Bug Reporting, and please check to see if there aren't other reports about the same issue already.

When is the next version coming out?

There are no fixed release dates for new versions. There may be announcements for new versions on the dev blog though.

Is there multiplayer?

Not at this time, nor is it being considered until the game's development is complete. Main issues with implementing multiplayer deal with handling time warp for all players. It may be released as a DLC at some point, so please do not post suggestions for multiplayer in the development suggestions forum at this time. Current community-posted ideas and unsupported implementations can be found in the multiplayer article.

Wiki

なぜ私のページが編集ブロックされてるの?

Kerbal Space Program wikiにはスパム抑制のためにブラックリストシステムが備わっています。ページ編集がブラックリスト条項に抵触した場合、あなたは投稿・編集をすることができなくなります。

Community

Where can I find a list of popular Youtubers dedicated to KSP episode production?

Please see the Kerbal Space Program Media Page for details on currently popular Youtube producers, Twitch broadcasters, and other dedicated KSP media providers.