Difference between revisions of "Kerbin"

Revision as of 15:04, 27 June 2015

Kerbin
Kerbin as seen from orbit.
Planet of Kerbol
Orbital Characteristics
Semi-major axis		13 599 840 256 m [Note 1]
Apoapsis		13 599 840 256 m [Note 1]
Periapsis		13 599 840 256 m [Note 1]
Orbital eccentricity		0
Orbital inclination		0 °
Argument of periapsis		0 °
Longitude of the ascending node		0 °
Mean anomaly		3.14 rad (at 0s UT)
Sidereal orbital period		9 203 545 s
		426 d 0 h 32 m 24.6 s
Synodic orbital period		Not defined
Orbital velocity		9 285 m/s
Physical Characteristics
Equatorial radius		600 000 m
Equatorial circumference		3 769 911 m
Surface area		4.5238934×1012 m2
Mass		5.2915158×1022 kg
Standard gravitational parameter		3.5316000×1012 m3/s2
Density		58 484.090 kg/m3
Surface gravity		9.81 m/s2 (1 g)
Escape velocity		3 431.03 m/s
Sidereal rotation period		21 549.425 s
		5 h 59 m 9.4 s
Solar day		21 600.000 s
		5 h 59 m 60 s
Sidereal rotational velocity		174.94 m/s
Synchronous orbit		2 863.33 km
Sphere of influence		84 159 286 m [Note 1]
Atmospheric Characteristics
Atmosphere present		Yes
Atmospheric pressure		101.325 kPa
		1 atm
Atmospheric height		70 000 m
		1.0×10-6 atm
Temperaturemin		-86.20 °C 186.95 K
Temperaturemax		15 °C 288.15 K
Oxygen present		Yes
Scientific multiplier
Surface		0.3
Splashed		0.4
Lower atmosphere		0.7
Upper atmosphere		0.9
Near space		1
Outer space		1.5
Recovery		1
↑ 1.0 1.1 1.2 1.3 The distances are given from the body's center, not from the surface (unlike ingame)

Kerbin is the home planet of the Kerbals, the location of the Space Center, and the main focus of Kerbal Space Program. It is also the Earth analog for the game and has two moons named Mun and Minmus.

Kerbin is the third planet in orbit around the star Kerbol. It is the third largest celestial body that orbits Kerbol, following Jool and Eve. Jool's moon Tylo has the same radius of Kerbin, though it may be classified as larger, as the highest point on Tylo is about 5 km higher than the highest point on Kerbin. However, Tylo has only 80% of Kerbin's mass.

Reaching a stable orbit around Kerbin is one of the first milestones a player might achieve in the game. Doing so requires a Δv of approximately 3500-4000 m/s, depending on the efficiency of the ascent profile and the aerodynamics of the launch vehicle and payload (or about 3500 m/s if one is using Ferram Aerospace Research mod), which is the second highest value after Eve. Many interplanetary missions expend over half of their Δv in reaching Kerbin orbit. The energy required to escape a body from a given altitude is always exactly twice the kinetic energy of a circular orbit around the body at that height, leading one observer to remark:

In-game description

Topography

Topographical representation of Kerbin's surface as of 0.18.2. Click for high resolution. by Zeroignite

Kerbal at Kerbin's highest peak

Kerbin has a roughly equal distribution of surface liquid water and solid land, with polar icecaps and scattered deserts. Some of its mountains exceed 6 km in height, with the tallest peak being 6767 m in altitude at the coordinates 46°21'32" E 61°35'53" N. The lowest point is almost 1.4 km deep and about 313° south-west of the Kerbal Space Center.

Craters

Terrain model centered on one of Kerbin's most pronounced craters

Unlike other bodies in its system, Kerbin has few visible craters because its environment would erode craters from the few meteors that avoid the gravity or surface of its large moon and survive entry. Nevertheless, some geological formations indicate that bodies have violently collided with Kerbin: two planetary features appear to be impact craters that are coincidentally separated by nearly 180 degrees. The least eroded, and therefore presumably youngest, of the two (both are in excess of 100 km diameter) lies along the coastline. The uplift is easily visible as a series of islands, and the feature has a central peak that pokes up through the water (also known as a rebound peak.) The other, and older of the two, is near the prime meridian in the northern hemisphere and is more easily missed, but its uplift rims are visible, and it has a central rebound peak.

Biomes

The biomes on Kerbin

Before 0.90 Kerbin was one of the few bodies with multiple biomes, Kerbin was second only to the Mun in number of biomes it has. Following the 0.90 update all celestial bodies have biomes. Science experiments can be performed at all biomes, though Kerbin's low multipliers result in less impressive results than more distant worlds. Kerbin's biomes show a loose correlation with Earth's biomes and geographic features. Uniquely, Kerbin has 33 location biomes at KSC, these are comprised of each building and their props, the crawlerway, the flag, and KSC itself; these give a jumpstart to gathering Science points in Career mode.

Kerbin biome map as of 0.90.0

Atmosphere

Kerbin has a thick, warm atmosphere with a mass of approximately 4.7×10¹⁶ kilograms, a sea level pressure of 101.325 kilopascals (1 atmosphere), and a depth of 70,000 meters. The atmosphere contains oxygen and can support combustion. Kerbin is the only planet or moon with a breathable atmosphere.

The average molecular weight of Kerbin air is 28.9644 g/mol, and its adiabatic index is 1.40. This suggests that Kerbin likely has an earthlike nitrogen-oxygen atmosphere. The air-fuel ratio of jet engines operating in Kerbin's atmosphere suggests that the percentage of oxygen is similar to that of Earth's atmosphere (about 21%).

Like all other atmospheres in the game, Kerbin's atmosphere fades exponentially as altitude increases. The scale height varies with altitude, which is a change from pre-1.0 versions of the game. The pressure-altitude profile is globally constant and independent of temperature. The following table gives the atmospheric pressure at various altitudes above sea level.

Kerbin's atmosphere can be divided into three major layers, comparable to Earth's troposphere, stratosphere and mesosphere. In the lower and upper layers, temperature decreases as altitude increases, while the middle layer spans of a region of increasing temperature. The boundary between the lower and middle layers occurs at an altitude of about 16 km at low latitudes, and about 9 km at high latitudes. The boundary between the middle and upper layer occurs at an altitude of about 38 km.

Air temperatures vary with latitude and time of day. At the equator, sea level temperatures vary between a nighttime low of 32 °C and a daytime high of 41 °C. At the poles, the temperature varies between -35 °C and -30 °C. The globally averaged sea level temperature is approximately 13.5 °C. Since Kerbin has no axial tilt, there are no seasonal temperature variations.

The atmosphere of Kerbin is patterned after Earth's U.S. Standard Atmosphere (USSA), though with the vertical height scale reduced by 20%. Kerbin's "base" temperature and atmospheric pressure can be very closely approximated using the equations of the USSA, where Kerbin's geometric altitude, z, is converted to Earth's geopotential altitude, h, using the following equation:

h = 7963.75·z / (6371 + 1.25·z)

The base temperature is the temperature less latitudinal and diurnal adjustments; it is roughly equal to the global mean temperature.

Atmospheric flight

The thickness of Kerbin's atmosphere makes it well suited for aerobraking from a high-speed interplanetary intercept. The periapsis altitude required for a successful aerocapture depends on the spacecraft's drag characteristics, its approach velocity, and the desired apoapsis of the resulting orbit. For spacecraft returning to Kerbin from Duna or Eve, a periapsis altitude of about 35,000 m should, under most conditions, result in an aerocapture. For higher speed intercepts, such as a return from Jool, a periapsis altitude of about 30,000 m should yield effective results.

Parachutes perform well in Kerbin's dense air, allowing landings on both land and water to be accomplished without the aid of propulsion.

Because of the presence of oxygen, jet engines can operate in Kerbin's atmosphere. And, together with it's thickness, Kerbin's atmosphere is ideally suited for aircraft flight.

Orbits

A Stayputnik MK2 satellite

A synchronous orbit is achieved with a semi-major axis of 3 463.33 km. Kerbisynchronous Equatorial Orbit (KEO) has a circularly uniform altitude of 2 863.33 km and a speed of 1 009.81 m/s. From a 70 km low equatorial orbit, the periapsis maneuver requires 676.5 m/s and the apoapsis maneuver requires 434.9 m/s. A syncronous Tundra orbit with eccentricity of 0.2864 and inclination of 63 degrees is achieved at 3799.7/1937.7 km. Inclination correlates with eccentricity: higher inclined orbits need to be more eccentric, while equatorial orbit may be circular, essentially KEO.

A semi-synchronous orbit with an orbital period of ½ of Kerbin's rotation period (2 h 59 m 34.7 s or 10774.7 seconds) is achieved at an altitude of 1 581.76 km with an orbital velocity of 1 272.28 m/s. A semi-syncronous Molniya orbit with eccentricity of 0.742^[1] and inclination of 63 degrees can not be achieved, because the periapsis would be 36 km below the ground. The highest eccentricity of a semi-synchronous orbit with a periapsis of 70 km is 0.693 with an apoapsis of 3100.36 km.

The Hill sphere (the radius around the planet at which moons are gravitationally stable) of Kerbin is 136 185 km, or roughly 227 Kerbin radii.

Interplanetary travel

From the lowest stable orbit around Kerbin (70 km), the amount of delta-V needed to reach the orbits of other celestials is:

For comparison, the Δv required to reach geostationary Kerbin orbit from LKO is 1.12 km/s

Reference frames

Gallery

• 

  Topographical map of Kerbin as of version 0.21

• 

  A projection map of Kerbin, as of 0.14.1 and before (including the old demo).

• 

  An accurate full-colour projection map of Kerbin as of 0.14.2 to 0.17.1

• 

  A map displaying the delta V needed from/to Kerbin

• 

  Kerbin, Mün and Minmus.

• 

  Kerbin with its two natural satellites, the Mun and Minmus, seen from KEO. Minmus can be seen just above the horizon of Kerbin on the left side of the picture.

• 

  A topographic heightmap of Kerbin made with the ISA MapSat plugin

• 

  Kerbin and the Mun, barely visible from ~500,550,000m

• 

  Topographical image of Kerbin from 0.17.1. The terrain is slightly different in the latest version.^[2]

• 

  An unmanned probe on escape trajectory, flying past Kerbin, Mün and Minmus

• 

  Kerbin's North Pole

• 

  A solar eclipse from low Kerbin orbit (LKO).

• 

  Kerbin as seen from munar orbit.

• 

  Kerbin modified with some texture mods.

Changes

0.90

• Added biomes

0.22

• Biomes added.

0.21

• Terrain revised to produce more detailed and interesting landforms.

0.19.1

• Fixed ladders on the fuel tanks near the launchpad.

0.19

• New mesh for the launchpad and area (no launchtower anymore).
• New mesh for the runway, with lights and sloping edges for rovers.

0.18

• Terrain overhaul: Entire planet redo. Deserts, darker and greener grass, islands, darker ocean/water, snow capped mountains. Looks more realistic.
• Several Easter Eggs added.
• Airport added to island off of KSC coastline. (Not a launching point)

0.17

• Improved atmosphere visuals.

0.15

• Minmus added.

0.14.2

• Much more varied and taller terrain added. Prior to this, some mountain ranges exceeded 600 m in height, but the tallest point was at an altitude of approximately 900 m.

0.12

• Mün added.

0.11

• Terrain overhaul, oceans became wet.

0.10.1

• Atmosphere extended from ~34,500 m to ~69,000 m.

0.7.3

• Initial Release

Trivia

Kerbin's continents are derived from libnoise,^[3] a coherent noise generating library, though they have been increasingly modified with time.

Notes

1. ↑ “Some Major Orbit Types” uses that, the Wikipedia article mentions 0.74105, and “Orbital Parameters of a Molniya Orbit” uses 0.72.
2. ↑ http://forum.kerbalspaceprogram.com/entry.php/247-A-Brave-New-World
3. ↑ http://libnoise.sourceforge.net/examples/complexplanet/

v t e Kerbol System Kerbol Moho Eve Kerbin Duna Dres Jool Eeloo (The Sun)   Gilly Mun Minmus Ike   Laythe Vall Tylo Bop Pol