Difference between revisions of "Kerbodyne ADTP-2-3"

From Kerbal Space Program Wiki
Jump to: navigation, search
m (typo)
(Merging two trivia sections)
Line 15: Line 15:
  
 
Like other adapters, the C7 Brand Adapter is used to transition a rocket from a 3.75m radius to a 2.5m radius.
 
Like other adapters, the C7 Brand Adapter is used to transition a rocket from a 3.75m radius to a 2.5m radius.
 
== Trivia ==
 
* The ADTP-2-3 has the best cost ratio of any liquid fuel tank; regarding dry cost, it only costs 8.2 cents per unit of propellant stored (or 54.1 cents including fuel).
 
:* For comparison, most fuel tanks cost ~50 cents per unit of propellant (or ~100 cents wet).
 
  
 
== Variants ==
 
== Variants ==
Line 37: Line 33:
  
 
== Trivia ==
 
== Trivia ==
 +
* The ADTP-2-3 has the best cost ratio of any liquid fuel tank; regarding dry cost, it only costs 8.2 cents per unit of propellant stored (or 54.1 cents including fuel).
 +
:* For comparison, most fuel tanks cost ~50 cents per unit of propellant (or ~100 cents wet).
 
* Prior to {{version|1.6}}, the ADTP-2-3 did not contain any fuel, and was therefore much lighter. While an ADTP-2-3 adapter had a mass of 0.2 tons then, it now has a dry mass of 1.875 tons (presumably added by the fuel tank itself).
 
* Prior to {{version|1.6}}, the ADTP-2-3 did not contain any fuel, and was therefore much lighter. While an ADTP-2-3 adapter had a mass of 0.2 tons then, it now has a dry mass of 1.875 tons (presumably added by the fuel tank itself).
:* The fuel tank-less version of the ADTP-2-3 can be accessed through the "advanced mode" options in the editor, if a lightweight adapter containing no fuel is needed.
+
:* The fuel tank-less version of the ADTP-2-3 was originally accessible through the "advanced mode" options in the editor, if a lightweight adapter containing no fuel was needed; however, this was removed. <!-- part is present in my 1.11.2 ReStock save, but not in my 1.12.2 no mods save -->
  
 
== Changes ==
 
== Changes ==

Revision as of 22:34, 30 August 2021

Kerbodyne ADTP-2-3
Part image
Adapter by
Kerbodyne

Radial size Large, Extra large
Cost (total) 1 623.00 Funds
(dry) 246.00 Funds
Mass (total) 16.88 t
(dry) 1.88 t
Drag 0.2-0.3
Max. Temp. 2000 K
Volume  ?
Impact Tolerance 6 m/s
Research Large volume containment.png Large Volume Containment
Unlock cost 12 000 Funds
Since version 0.23.5
Part configuration part_v2.cfg
Liquid fuel 1 350 Units of fuel
Oxidizer 1 650 Units of fuel

The Kerbodyne ADTP-2-3 is a liquid fuel tank containing 15 t of liquid fuel/oxidizer mixture. Like the C7 Brand Adapter - 2.5m to 1.25m, it is both an adapter and a fuel tank. It is designed to attach size 2 parts to size 3 parts.

It contains slightly less fuel than the Kerbodyne S3-3600 Tank or the Rockomax X200-32 Fuel Tank. Unlike the C7 Brand Adapter, it is the only adapter of its size; no slanted adapter exists.

Product description

This adapter is used to bridge between Kerbodyne and Rockomax rocket bodies.

Kerbodyne

Usage

The ADTP-2-3 is a liquid fuel tank containing LF/O mix. This allows it to power liquid fuel rocket engines, like the RE-L10 "Poodle" Liquid Fuel Engine. If there are multiple liquid fuel tanks connected to an engine, then they will all be drained equally to power it. [1] Unlike both the C7 Brand Adapter and the Kerbodyne S3 series tanks, the ADTP-2-3 can only be placed in-line, and cannot be radially mounted.

When full, one tank can power a single RE-L10 "Poodle" Liquid Fuel Engine for up to 205.9 seconds at full thrust, or a single Kerbodyne KR-2L+ "Rhino" Liquid Fuel Engine for up to 25.0 seconds at full thrust.

Like other adapters, the C7 Brand Adapter is used to transition a rocket from a 3.75m radius to a 2.5m radius.

Variants

As of version 1.6 this adapter has three textures that can be switched in the editor.

Gray variant
White variant
Orange variant
The different variants of the adapter

Trivia

  • The ADTP-2-3 has the best cost ratio of any liquid fuel tank; regarding dry cost, it only costs 8.2 cents per unit of propellant stored (or 54.1 cents including fuel).
  • For comparison, most fuel tanks cost ~50 cents per unit of propellant (or ~100 cents wet).
  • Prior to version 1.6, the ADTP-2-3 did not contain any fuel, and was therefore much lighter. While an ADTP-2-3 adapter had a mass of 0.2 tons then, it now has a dry mass of 1.875 tons (presumably added by the fuel tank itself).
  • The fuel tank-less version of the ADTP-2-3 was originally accessible through the "advanced mode" options in the editor, if a lightweight adapter containing no fuel was needed; however, this was removed.

Changes

1.6
  • New model and texture
  • Added 3 variants
  • Increased mass from 0.2 to 1.875
  • Added Liquid Fuel/Oxidizer
0.23.5
  • Initial release
  1. This assumes that the flow priority setting has not been adjusted.