Difference between revisions of "Mk3 to 2.5m Adapter Slanted"

From Kerbal Space Program Wiki
Jump to: navigation, search
m
(Copied Mk3 to 2.5m Adapter page)
 
Line 2: Line 2:
 
{{:Mk3 to 2.5m Adapter Slanted/Box}}
 
{{:Mk3 to 2.5m Adapter Slanted/Box}}
  
The '''Mk3 to 2.5m Adapter Slanted''' is a part introduced in version 0.90.0. It contains the [[liquid fuel]]/[[oxidizer]] mixture, and is mainly used for spaceplanes. Because of its shape, it is not suited for a central core on traditional rockets as it would lead to the rocket having an asymmetrical center of mass. It'd be possible to use them as symmetrical boosters though.
+
The '''Mk3 to 2.5m Adapter Slanted''' is a [[Radial size|Mk3]] to [[Radial size|2.5m]] adapter and fuel tank containing [[liquid fuel]] and [[oxidizer]] mixture. It is the slanted variant of the [[Mk3 to 2.5m Adapter]].
 +
 
 +
It has the same mass and fuel capacity as the [[Mk3 Rocket Fuel Fuselage Short]].  
  
 
== Product description ==
 
== Product description ==
{{Quote|Makes your craft hang in the air like bricks don't!|manufacturer=C7}}
+
{{Quote
 +
|Makes your craft hang in the air like bricks don't!
 +
|manufacturer=C7}}
 +
 
 +
== Usage ==
 +
The Mk3 to 2.5m Adapter Slanted is used to provide a seamless connection between Mk3 and 2.5m parts, allowing 2.5m parts such as [[Reaction engine|engines]], [[fuel tank]]s, [[reaction wheel]]s, or [[command module]]s to be attached to a Mk3 craft (such as a [[spaceplane]]). It also has a flat side like other Mk3 parts, letting it also serve as an attachment point for wings, fins, and landing gear.
 +
 
 +
Unlike the [[Mk3 to 2.5m Adapter]], the Mk3 to 2.5m Adapter Slanted is not well suited to usage on traditional rockets, due to its slanted shape. However, it is possible to use them on symmetrical, radially mounted parts, without unbalancing the rocket's center of mass.
 +
 
 +
The Mk3 to 2.5m Adapter is also a [[rocket fuel tank]] containing liquid fuel and oxidizer. It can be used to power [[Reaction engine#Liquid fuel rocket engines|liquid fuel rocket engines]], like the [[RE-L10 "Poodle" Liquid Fuel Engine]]. It can be placed both in-line and radially mounted.
 +
 
 +
When full, one tank can power a single [[RE-L10 "Poodle" Liquid Fuel Engine]] for up to 171.6 seconds at full thrust, or a single closed-cycle [[CR-7 R.A.P.I.E.R. Engine]] for up to 207.7 seconds at full thrust.
 +
 
 +
At 2600K, its heat tolerance is slightly lower than that of most Mk3 parts. However, it is still higher than the heat tolerance of the average 2.5m part.
 +
 
 +
The Mk3 to 2.5m Adapter can be combined with a [[C7 Brand Adapter Slanted - 2.5m to 1.25m]] for a slanted, seamless connection between Mk3 and 1.25m parts. In addition, an [[Advanced Nose Cone - Type B]] can be added for a smooth transition to a slanted tip, such as a Mk3 aircraft tail.
  
 
== Changes ==
 
== Changes ==

Latest revision as of 18:43, 3 August 2021

This article is a stub. You can help KSP Wiki by expanding it.
Mk3 to 2.5m Adapter Slanted
Part image
Liquid fuel tank by
C7 Aerospace Division

Radial size Large, Mk3, Radial mounted
Cost (total) 2 500.00 Funds
(dry) 1 352.50 Funds
Mass (total) 14.29 t
(dry) 1.79 t
Drag 0.3-0.2
Max. Temp. 2600 K
Volume  ?
Impact Tolerance 50 m/s
Research HeavyAerodynamics.png Heavy Aerodynamics
Unlock cost 42 000 Funds
Since version 0.90.0
Part configuration Mk3-Size2Slant.cfg
Liquid fuel 1 125 Units of fuel
Oxidizer 1 375 Units of fuel

The Mk3 to 2.5m Adapter Slanted is a Mk3 to 2.5m adapter and fuel tank containing liquid fuel and oxidizer mixture. It is the slanted variant of the Mk3 to 2.5m Adapter.

It has the same mass and fuel capacity as the Mk3 Rocket Fuel Fuselage Short.

Product description

Makes your craft hang in the air like bricks don't!

C7 Aerospace Division

Usage

The Mk3 to 2.5m Adapter Slanted is used to provide a seamless connection between Mk3 and 2.5m parts, allowing 2.5m parts such as engines, fuel tanks, reaction wheels, or command modules to be attached to a Mk3 craft (such as a spaceplane). It also has a flat side like other Mk3 parts, letting it also serve as an attachment point for wings, fins, and landing gear.

Unlike the Mk3 to 2.5m Adapter, the Mk3 to 2.5m Adapter Slanted is not well suited to usage on traditional rockets, due to its slanted shape. However, it is possible to use them on symmetrical, radially mounted parts, without unbalancing the rocket's center of mass.

The Mk3 to 2.5m Adapter is also a rocket fuel tank containing liquid fuel and oxidizer. It can be used to power liquid fuel rocket engines, like the RE-L10 "Poodle" Liquid Fuel Engine. It can be placed both in-line and radially mounted.

When full, one tank can power a single RE-L10 "Poodle" Liquid Fuel Engine for up to 171.6 seconds at full thrust, or a single closed-cycle CR-7 R.A.P.I.E.R. Engine for up to 207.7 seconds at full thrust.

At 2600K, its heat tolerance is slightly lower than that of most Mk3 parts. However, it is still higher than the heat tolerance of the average 2.5m part.

The Mk3 to 2.5m Adapter can be combined with a C7 Brand Adapter Slanted - 2.5m to 1.25m for a slanted, seamless connection between Mk3 and 1.25m parts. In addition, an Advanced Nose Cone - Type B can be added for a smooth transition to a slanted tip, such as a Mk3 aircraft tail.

Changes

0.90.0
  • Initial release