Difference between revisions of "LT-05 Micro Landing Strut"

From Kerbal Space Program Wiki
Jump to: navigation, search
m (-version template usage and link directly;)
(Added info about 'impact tolerance')
Line 1: Line 1:
 
{{:LT-5 Micro Landing Strut/Box}}
 
{{:LT-5 Micro Landing Strut/Box}}
  
The '''LT-5 Micro Landing Strut''' is the smallest and lightest landing leg, providing a low mass option for very small crewed spacecraft and probes.
+
The '''LT-05 Micro Landing Strut''' is the smallest and lightest landing leg, providing a low mass option for small crewed spacecraft and probes (up to 10 tons at landing).
  
 
== Usage ==
 
== Usage ==
 
[[File:Lander sunken.png|left|upright|thumb|LT-5s sunken into the terrain on a small [[mun|munar]] probe]]
 
[[File:Lander sunken.png|left|upright|thumb|LT-5s sunken into the terrain on a small [[mun|munar]] probe]]
The LT-5 can be extended with the G key similarly to the [[LT-1 Landing Strut|LT-1]] and [[LT-2 Landing Strut|LT-2]]. Its impact resistance is lower than them, but not as bad as the description implies (10 m/s vs. 12 m/s). It does however have the disadvantage that it extends at less than a 45° angle, meaning that the vessel may be less stable and tip over a lot more easily when landing. Be careful that it lands vertically and on even ground.
+
The LT-05 can be extended with the G key similarly to the [[LT-1 Landing Strut|LT-1]] and [[LT-2 Landing Strut|LT-2]].
  
It extends just far enough to protect an [[LV-909 Liquid Fuel Engine|LV-909]], [[Rockomax 48-7S]] or [[LV-1 Liquid Fuel Engine|LV-1]] under it, but only when placed as far down as possible.
+
It is important to understand that landing legs have two different 'impact' speeds. The 150 m/s 'impact tolerance' applies when landing a very light vessel (< 1.5 tons) on its feet, with the suspension ''unlocked''. The legs can usually handle a 30 m/s landing with the suspension ''locked''. The 10 m/s crash tolerance applies when any other part of the leg hits the ground instead of the feet.
  
Currently the LT-5 sinks a bit into the terrain, hiding the feet on the end.{{Check version||0.20.2}}
+
These legs do not extend very far at all, either vertically or horizontally. This means the vessel may tip over a lot more easily when landing. Be careful that it lands vertically on even ground, and attach the legs as far apart as possible on the craft.
 +
 
 +
With normal placement, the legs extend downward just far enough to protect an [[LV-909 Liquid Fuel Engine|LV-909]], [[Rockomax 48-7S]] or [[LV-1 Liquid Fuel Engine|LV-1]], but only when attached as low as possible. You can use the [[Vehicle_Assembly_Building#Gizmo|offset]] feature to gain an additional meter or so.
  
 
== Product description ==
 
== Product description ==
Line 15: Line 17:
 
|A small landing leg designed for space probes or lightweight landers. Basically made of toothpicks... erm, Space-grade toothpicks mind you, but be careful with them anyway.
 
|A small landing leg designed for space probes or lightweight landers. Basically made of toothpicks... erm, Space-grade toothpicks mind you, but be careful with them anyway.
 
}}
 
}}
 +
 +
== Trivia ==
 +
 +
* Currently the LT-05 sinks a bit into the terrain, hiding the feet on the end.{{Check version||0.20.2}}
 +
* After successfully landing a moderately heavy craft (5 tons) with the suspension unlocked, it may slowly tip over as one leg retracts. Setting an action group to lock or toggle the suspension after landing can be helpful.
  
 
== Changes ==
 
== Changes ==

Revision as of 00:21, 8 March 2016

LT-05 Micro Landing Strut
Part image
Landing leg by
Moving Parts Experts Group

Radial size Radial mounted
Cost (total) 200.00 Funds
Mass (total) 0.01500 t
Drag 0.2
Max. Temp. 1200 K
Volume  ?
Impact Tolerance 10 m/s
Research Survivability.png Survivability
Unlock cost 820 Funds
Since version 0.18
Part configuration landingLegLT-5.cfg

The LT-05 Micro Landing Strut is the smallest and lightest landing leg, providing a low mass option for small crewed spacecraft and probes (up to 10 tons at landing).

Usage

LT-5s sunken into the terrain on a small munar probe

The LT-05 can be extended with the G key similarly to the LT-1 and LT-2.

It is important to understand that landing legs have two different 'impact' speeds. The 150 m/s 'impact tolerance' applies when landing a very light vessel (< 1.5 tons) on its feet, with the suspension unlocked. The legs can usually handle a 30 m/s landing with the suspension locked. The 10 m/s crash tolerance applies when any other part of the leg hits the ground instead of the feet.

These legs do not extend very far at all, either vertically or horizontally. This means the vessel may tip over a lot more easily when landing. Be careful that it lands vertically on even ground, and attach the legs as far apart as possible on the craft.

With normal placement, the legs extend downward just far enough to protect an LV-909, Rockomax 48-7S or LV-1, but only when attached as low as possible. You can use the offset feature to gain an additional meter or so.

Product description

A small landing leg designed for space probes or lightweight landers. Basically made of toothpicks... erm, Space-grade toothpicks mind you, but be careful with them anyway.

Trivia

  • Currently the LT-05 sinks a bit into the terrain, hiding the feet on the end.[outdated]
  • After successfully landing a moderately heavy craft (5 tons) with the suspension unlocked, it may slowly tip over as one leg retracts. Setting an action group to lock or toggle the suspension after landing can be helpful.

Changes

0.22
  • Description changed
0.18
  • Initial release