Difference between revisions of "Mk25 Parachute"

From Kerbal Space Program Wiki
Jump to: navigation, search
(Changed quote attribution from out-of-game dev nickname to in-game "Found lying by the side of the road")
m (Product description: -> No manufacturer so no one to quote)
 
(5 intermediate revisions by 4 users not shown)
Line 3: Line 3:
 
== Usage ==
 
== Usage ==
  
This parachute differs from the others that it activates on a much higher altitude and generates more drag when not fully deployed, but it has much less drag than the others when fully deployed, often not enough to prevent a craft from crashing on the surface. That means that in addition to this parachute a second method of braking is required, like a second conventional parachute or engines.
+
This parachute is eqivalent to two [[Mk12-R Radial-Mount Drogue Chute]]s. Drogue chutes exist to slow a craft down just enough to safely open a standard parachute. They differ from standard parachutes by activating at a much higher altitude and speed, and generating more drag when not fully deployed. They have much less drag than the others when fully deployed, often not enough to prevent a craft from crashing on the surface. That means that in addition to this parachute a second method of braking is always required.
  
When a craft is traveling very fast, the sudden shock of being braked by a conventional parachute can cause parts to fall off of the vessel. This can be avoided by deploying a Mk25 parachute first to get the craft down to a more reasonable speed.
+
All parachutes currently have four activation stages: unactivated, activated, partial deployment, and fully deployed. A parachute becomes activated when it is staged, or when the "deploy" button is clicked and the craft is in flight, or it is triggered through an action group - the parachute's icon will turn light blue or green, but nothing else will happen at that point. Parachutes can be activated only on a craft that has some kind of command unit, so it is sometimes important to activate them before they get decoupled from the main craft.
  
Don't forget that parachute's efficiency depends of atmospheric density, so it won't work or even deploy in vacuum (including Munar landing).
+
A parachute will automatically go into partial deployment mode if it is activated and then descends below the atmospheric pressure set in its [[tweakable]] values. It will automatically go into full deployment if it is already partially deployed, and reaches an altitude above the terrain that is set in the tweakable values.
  
Parachutes do not appear to subtract any of their mass from the craft they're attached to when they disappear post-landing.
+
Right-clicking on the parachute (or looking at the parachute's icon) will give you information on whether the parachute is likely to survive being partially or fully deployed at the craft's current speed. On Kerbin, this parachute can always safely fully deploy at a speed of around 500 meters per second. Safe partial deployment speeds are quite a bit higher, and depend on atmospheric pressure.
  
== Description ==
+
In reality, any drogue chute should ''fully'' deploy before a regular parachute even tries to partially deploy. However, the maximum full deployment altitude for the drogue chute is currently 5000 meters, which is probably below the point where you want to partially deploy your regular parachutes.
 +
 
 +
=== Usage Details ===
 +
 
 +
In the current version attempting to activate parachutes and a decoupler on the same stage seems to be dangerous. Sometimes the decoupler activates first and then the parachutes do not activate at all.
 +
 
 +
It is almost always useful to tweak the [[tweakable]] values on these parachutes.
 +
 
 +
==== Pressure ====
 +
 
 +
The default .02 partial deployment pressure corresponds to an altitude of around 21000 meters on Kerbin. You need to know through testing whether the atmosphere will have slowed your craft down to 500 or 600 meters per second by this point, to make it safe to partially deploy the drogue chute. If it will take a little longer to slow to a safe speed, then increase this pressure value accordingly.
 +
 
 +
==== Altitude ====
 +
 
 +
The default full deployment altitude value for this parachute is 2500 meters, which is just wrong (basically, it's a bug). Always increase it all the way up to 5000 meters - even higher (like 10000) would be better, in future versions.
 +
 
 +
== Product description ==
 
{{Quote
 
{{Quote
|The Mk25 is what's known as a "Drogue" parachute - small, deploys high up, and certainly not enough to stop you smashing into the ground on its own, but useful for slowing heavy craft down before the deployment of your main chutes.
+
|The Mk25 is what's known as a "Drogue" parachute - small, deploys high up, and certainly not enough to stop you smashing into the ground on its own, but useful for slowing heavy craft down before the deployment of your main chutes.}}
|Found lying by the side of the road}}
 
  
 
== Changes ==
 
== Changes ==
  
;{{Version|0.18|}}
+
;[[0.18]]
 
* Initial release
 
* Initial release
  
 
{{Parts}}
 
{{Parts}}
 
[[Category:Parachutes]]
 
[[Category:Parachutes]]

Latest revision as of 13:58, 18 October 2016

Mk25 Parachute
Part image
Parachute by
Found lying by the side of the road

Radial size Small, Radial mounted
Cost (total) 400.00 Funds
Mass (total) 0.200 t
Drag 0.1
Max. Temp. 2500 K
Impact Tolerance 12 m/s
Research Landing.png Advanced Landing
Unlock cost 3 500 Funds
Since version 0.18
Part configuration parachuteMk25.cfg
Semi-Deployed Drag 4
Semi Deploy Min Pressure 0.02 atm
Fully-Deployed Drag 170
Full Deployment Altitude 2500 m AGL
Max. Temp. 1600 K
Testing Environments
On the surface No
In the ocean No
On the launchpad No
In the atmosphere Yes
Sub-orbital No
In an orbit No
On an escape No
Docked No
Test by staging Yes
Manually testable No
Packed volume 900 l

Usage

This parachute is eqivalent to two Mk12-R Radial-Mount Drogue Chutes. Drogue chutes exist to slow a craft down just enough to safely open a standard parachute. They differ from standard parachutes by activating at a much higher altitude and speed, and generating more drag when not fully deployed. They have much less drag than the others when fully deployed, often not enough to prevent a craft from crashing on the surface. That means that in addition to this parachute a second method of braking is always required.

All parachutes currently have four activation stages: unactivated, activated, partial deployment, and fully deployed. A parachute becomes activated when it is staged, or when the "deploy" button is clicked and the craft is in flight, or it is triggered through an action group - the parachute's icon will turn light blue or green, but nothing else will happen at that point. Parachutes can be activated only on a craft that has some kind of command unit, so it is sometimes important to activate them before they get decoupled from the main craft.

A parachute will automatically go into partial deployment mode if it is activated and then descends below the atmospheric pressure set in its tweakable values. It will automatically go into full deployment if it is already partially deployed, and reaches an altitude above the terrain that is set in the tweakable values.

Right-clicking on the parachute (or looking at the parachute's icon) will give you information on whether the parachute is likely to survive being partially or fully deployed at the craft's current speed. On Kerbin, this parachute can always safely fully deploy at a speed of around 500 meters per second. Safe partial deployment speeds are quite a bit higher, and depend on atmospheric pressure.

In reality, any drogue chute should fully deploy before a regular parachute even tries to partially deploy. However, the maximum full deployment altitude for the drogue chute is currently 5000 meters, which is probably below the point where you want to partially deploy your regular parachutes.

Usage Details

In the current version attempting to activate parachutes and a decoupler on the same stage seems to be dangerous. Sometimes the decoupler activates first and then the parachutes do not activate at all.

It is almost always useful to tweak the tweakable values on these parachutes.

Pressure

The default .02 partial deployment pressure corresponds to an altitude of around 21000 meters on Kerbin. You need to know through testing whether the atmosphere will have slowed your craft down to 500 or 600 meters per second by this point, to make it safe to partially deploy the drogue chute. If it will take a little longer to slow to a safe speed, then increase this pressure value accordingly.

Altitude

The default full deployment altitude value for this parachute is 2500 meters, which is just wrong (basically, it's a bug). Always increase it all the way up to 5000 meters - even higher (like 10000) would be better, in future versions.

Product description

The Mk25 is what's known as a "Drogue" parachute - small, deploys high up, and certainly not enough to stop you smashing into the ground on its own, but useful for slowing heavy craft down before the deployment of your main chutes.

Changes

0.18
  • Initial release