Difference between revisions of "Mk1 Diverterless Supersonic Intake"
From Kerbal Space Program Wiki
(Moved to correct page) |
(Added paragraph on performance) |
||
| Line 1: | Line 1: | ||
{{:Mk1 Fuselage - Intake/Box}} | {{:Mk1 Fuselage - Intake/Box}} | ||
| − | |||
The '''Mk1 Diverterless Supersonic Intake''' is a structural part like the [[Engine Nacelle]], but carries a bit more fuel. It features an inline air intake and it has 2 attachment nodes at the front and the back of the part. A possible usage is to attach this part radially to an aircraft's main hull, and put an intake at the front and a jet engine at the back. | The '''Mk1 Diverterless Supersonic Intake''' is a structural part like the [[Engine Nacelle]], but carries a bit more fuel. It features an inline air intake and it has 2 attachment nodes at the front and the back of the part. A possible usage is to attach this part radially to an aircraft's main hull, and put an intake at the front and a jet engine at the back. | ||
| + | |||
| + | Altough it is described as a supersonic intake it is actually inferior in performance to other supersonic intakes and becomes nearly completely ineffective at mach 5, compared with mach 3.5 for subsonic intakes and mach 8 for supersonic intakes. This makes it a poor fit for high performance supersonic jet engines, altough it is adequate for the [[J-404 "Panther" Afterburning Turbofan|J-404 "Panther"]]. | ||
== Product description == | == Product description == | ||
Revision as of 11:22, 16 March 2017
| Mk1 Diverterless Supersonic Intake | ||
 | ||
| Air intake by C7 Aerospace Division | ||
| Radial size | Small, Radial mounted | |
| Cost | (total) | 720.00 
|
| (dry) | 560.00
| |
| Mass | (total) | 1.180 t |
| (dry) | 0.180 t | |
| Drag | 0.3-0.2 | |
| Max. Temp. | 2000 K | |
| Impact Tolerance | 10 m/s | |
| Research |  High Altitude Flight
| |
| Unlock cost | 4 200
| |
| Since version | 0.25 | |
| Part configuration | mk1FuselageIntake.cfg | |
| Intake speed | 12 m/s | |
| Intake area | 0.61 m2 | |
| Packed volume | None | |
| Liquid fuel | 200 
| |
| Intake air | 2 
| |
The Mk1 Diverterless Supersonic Intake is a structural part like the Engine Nacelle, but carries a bit more fuel. It features an inline air intake and it has 2 attachment nodes at the front and the back of the part. A possible usage is to attach this part radially to an aircraft's main hull, and put an intake at the front and a jet engine at the back.
Altough it is described as a supersonic intake it is actually inferior in performance to other supersonic intakes and becomes nearly completely ineffective at mach 5, compared with mach 3.5 for subsonic intakes and mach 8 for supersonic intakes. This makes it a poor fit for high performance supersonic jet engines, altough it is adequate for the J-404 "Panther".
Product description
| “ | This version of the Mk1 Fuselage module carries only a bit of fuel, but is fitted with a streamlined air intake. It consists of a "bump" and a forward-swept inlet cowl. This eliminates the need for a Splitter plate, while compressing the air to slow it down from supersonic to subsonic speeds. DSIs can be used to replace the intake ramp and inlet cone, which are more complex, heavy and expensive. — C7 Aerospace Division |
” |
Changes
- Dry Mass reduced from 0.27 to 0.17
- Crash tolerance decreased from 20 to 10
- Remodeled and retextured
- Added fuel tank with 150 units of liquid fuel
- Tech tree location changed from Aerodynamics to High Altitude Flight
- Increased dry mass from 0.12 to 0.27
- Initial release
