PresMat Barometer
| PresMat Barometer | ||
 | ||
| Environmental sensor by Probodobodyne Inc | ||
| Radial size | Radial mounted | |
| Cost | (total) | 880.00 
|
| Mass | (total) | 0.005 t [1] |
| Drag | 0.2 [1] | |
| Max. Temp. | 1200 K | |
| Impact Tolerance | 8 m/s | |
| Research |  Survivability
| |
| Unlock cost | 2 200
| |
| Since version | 0.18 | |
| Part configuration | sensorBarometer.cfg | |
| Experiment | Atmospheric Pressure Scan | |
| Collectable | Yes | |
| Rerunnable | Yes | |
| Resettable | Yes | |
| Electricity required | 0.0075 ⚡/s | |
| Packed volume | 4 l | |
| ||
The PresMat Barometer measures the current atmospheric pressure. In career mode, it is available with Survivability, at level 3 of the technology tree. As of 0.24.2 , it had "PhysicsSignificance = 1", making it a zero drag and physicsless part. For some reason, it has a warranty void if exposed to air.
Usage
It shows pressure in kPa. A pressure below 0.0001 atm is shown as vacuum by the sensor. Lower atmospheric pressures markedly reduce lift and drag induced by the atmosphere, and cause a small change in engine efficiency.
While it is activated, the barometer drains 0.0075 units of Electric Charge per second (0.45 ⚡/m, 27 ⚡/hr).
While in previous versions the PressMat could not be used to earn science in a vacuum, in 1.0 this was changed. The PresMat can now do science nearly anywhere.
Product description
| “ | A device for measuring the local atmospheric pressure. Warranty void if exposed to air. — Probodobodyne Inc. |
” |
Changes
- Changed tech from Engineering 101 to Basic Science.
- Changed costs.
- Mass halved, max temp reduced from 3200 K to 1200 K.
- Can now do science in vacuums.
- "PhysicsSignificance = 1" added. The part now has 0 mass and drag, despite the listed values.
- Added functionality
- Initial release
