Difference between revisions of "LT-1 Landing Struts"
(+Workaround) |
m (-version template usage and link directly;) |
||
| Line 17: | Line 17: | ||
== Changes == | == Changes == | ||
| − | ; | + | ;[[0.22]] |
* Revamped (new model), new deployment animation and Suspension | * Revamped (new model), new deployment animation and Suspension | ||
| − | ; | + | ;[[0.18]] |
* Name corrected (LT-2 → LT-1), mass increased from 0.005 to 0.05. | * Name corrected (LT-2 → LT-1), mass increased from 0.005 to 0.05. | ||
;{{Version|0.17|}} | ;{{Version|0.17|}} | ||
Revision as of 13:23, 3 May 2015
| LT-1 Landing Struts | ||
.png) | ||
| Landing leg by Moving Parts Experts Group | ||
| Radial size | Radial mounted | |
| Cost | (total) | 440.00 
|
| Mass | (total) | 0.050 t |
| Drag | 0.2 | |
| Max. Temp. | 2000 K | |
| Impact Tolerance | 12 m/s | |
| Research |  Landing
| |
| Unlock cost | 2 900
| |
| Since version | 0.16 | |
| Part configuration | landingLegLT-1.cfg | |
| Retractable | Yes | |
| Brake torque | No | |
| Steering range | No | |
| Packed volume | 160 l | |
The LT-1 Landing Strut is used as a landing support when landing vertically.
Usage
The LT-1 is connected radially and extends with the G key (default). It does not extend as far as the larger LT-2 Landing Strut, but is half as heavy.
As they are relatively short, LT-1 landing struts need to be placed low on a rocket. They do not extend far enough to be used with LV-T30, LV-T45, or the Poodle, but can reach past the LV-909 and Aerospike. A workaround with larger engines is using girders, I-beams, or panels to extend lower on the craft with a landing strut on each to contact the ground.
The maximum safe landing speed for an LT-1 landing strut is ~12 m/s. Landings with massive rockets or on rough terrain may need to be slower to avoid ripping off landing legs.
Product description
| “ | It may have been originally designed as a heavy-duty metal detector, but this Landing Leg certainly emphasises[sic] an important fact in surface landings: You don't need to put a crater in the ground to stop yourself. | ” |
Changes
- Revamped (new model), new deployment animation and Suspension
- Name corrected (LT-2 → LT-1), mass increased from 0.005 to 0.05.
- part file/internal behavior changed.
- Initial release
