Sepratron I
From Kerbal Space Program Wiki
Sepratron I | ||
Solid rocket booster by Periapsis Rocket Supplies Co | ||
Radial size | Radial mounted | |
Cost | (total) | 75.00 |
(dry) | 70.20 | |
Mass | (total) | 0.073 t |
(dry) | 0.013 t | |
Drag | 0.2-0.3 | |
Max. Temp. | 2000 K | |
Impact Tolerance | 7 m/s | |
Research | Precision Propulsion | |
Unlock cost | 1 100 | |
Since version | 0.17 | |
Part configuration | solidBoosterSep.cfg | |
Maximum thrust | (1 atm) | 13.79 kN |
(vacuum) | 18.00 kN | |
Isp | (1 atm) | 118 s |
(vacuum) | 154 s | |
Fuel consumption | 1.59 /s | |
Thrust vectoring | No | |
Burn time | (1 atm) | 3.9 s |
(vacuum) | 5 s | |
Testing Environments | ||
On the surface | No | |
In the ocean | No | |
On the launchpad | Yes | |
In the atmosphere | Yes | |
Sub-orbital | Yes | |
In an orbit | Yes | |
On an escape | No | |
Docked | No | |
Test by staging | Yes | |
Manually testable | Yes | |
Packed volume | 25 l | |
Stacking capacity | 2 units | |
Solid fuel | 8 |
The Sepratron I is a very tiny solid rocket booster.
Usage
Unlike traditional SRBs, the Sepratron provides too little thrust to be useful during most takeoffs. Instead it offers two great advantages over other boosters: Its small size allows the Sepratron to be placed on almost any surface, while its low weight generally eliminates the need to detach them after burn-out. Red block letters on its casing read "BIG ROCKET THING. DO NOT DROP".
Possible uses include:
- Rocket-assisted take-off by mounting Sepratrons on the body of a plane;
- Stage detachment: Placed on a spent stage and angled correctly, activating Sepratrons during the detachment of the spent stage can drive the debris away from the rocket;
- Test launches of lightweight vehicles; note that Sepratrons can quickly overheat adjacent parts
- Emergency escape engines; attached to a capsule or other important part and bound to the "Abort" action group, Sepratrons allow said parts to quickly and easily escape from exploding rockets and other emergencies.
- Used as a way to substitute for thrust loss. Separating a stage and setting them off when decoupling can be used to maintain constant thrust.
- Used as a way to deorbit small, unused probes on a low orbit.
Description
“ | Although formerly designated as "really pretty crappy", Kerbal Scientists have slowly warmed up to the Sepratron I's many uses, such as separating things. For best results, angle before use. — Periapsis Co. Rocket Supplies |
” |
Changes
- Mass decreased from 0.2175t Full, 0.15t Empty to 0.0725t Full, 0.0125t Empty. Thrust decreased from 20 kN to 18 kN. Fuel capacity reduced from 9L to 8L. The Sepratron I now has the best TWR of all stock engines.
- Initial release.