Difference between revisions of "Mk1-3 Command Pod"

Revision as of 15:32, 5 June 2020

Mk1-3 Command Pod
Command pod by Kerlington Model Rockets and Paper Products Inc
Radial size		Large, Small
Cost	(total)	3 905.00
	(dry)	3 764.00
Mass	(total)	2.720 t
	(dry)	2.318 t
Drag		0.15-0.2
Max. Temp.		2400 K
Impact Tolerance		20 m/s
Research		Command Modules
Unlock cost		7 600
Since version		1.4
Part configuration		mk1-3.cfg
Crew capacity	(maximum)	3
	(required)	1
SAS level		× None
Torque		15 kN·m
Electricity required		0.030 ⚡ s·kN·m
Experiment		Crew Report
Collectable		No
Rerunnable		Yes
Resettable		Yes
Electricity required		None
Antenna type		Internal
Antenna rating		5 km
Required crew		2
Multihop		No
Lift generated		1.4
Maximum thrust	(1 atm)	0.42 kN
	(vacuum)	1.00 kN
Isp	(1 atm)	100 s
	(vacuum)	240 s
Fuel consumption		0.11 /s
Thrust vectoring		No
Inventory Slots		3 slots
Volume limit		200 l
Monopropellant		30
Electric capacity		150 ⚡

The Mk1-3 Command Pod is a Command Module housing three Kerbal crew members during their mission. It is a durable,^[1], rounded command pod. Currently, it is the second most expensive pod available in Career or Science mode.

Usage

Generally placed at the top of the rocket, the Mk1-3 Pod provides full command module functionality. It has twice the torque of most other manned cockpits, which is usually sufficient for small or medium-sized rockets.

It features a 1.25m radial size node on top, typically used for parts like the Mk16-XL Parachute, proper-sized docking ports, SAS modules, or a Launch Escape System. On the bottom, it has a 2.5m radial node.

The high density of the pod makes it useful for shifting the center of mass and orientating ships during aerobraking/reentry; additionally, the high mass and temperature tolerance makes the pod useful for absorbing heat flux and it makes a moderately effective heat shield by itself. It also has a very high impact tolerance of 45 m/s, which means the pod is often the only part of a ship which survives a crash. Put together, this makes it very good for returning to Kerbin.

This pod has a decent capacity of resources in comparison to other capsules. 150 units of electric charge and 30 units of monopropellant gives the ability to execute some missions without extra batteries or monopropellant tanks being necessary. This monopropellant capacity combined with its integrated RCS thrusters and the upper node of the capsule being sized for most docking ports mean the pod is good for docking (but beware: there is NO fore/aft thrust at all).

The Mk3 cockpit intended for spaceplanes has mostly superior qualities, but is larger and has more mass.

The Mk1-3 is used as a replacement for the old Mk1-2 Command Pod since 1.4.

If 2 pilots are aboard, the ship containing this command pod will be able to control probes or rovers without a connection to the KSC.

Product description

Trivia

Real-world comparison

The Mk1-3 Command Pod was inspired by the Apollo capsule.

Changes

1.8

• Reduced crashTolerance from 45 to 20

1.4.2

• Reduced ElectricCharge consumption from 1.2 to 0.45

1.4.1

• Added IVA

1.4

• Initial Release

References

1. ↑ [1]