TVR-1180C Mk1 Stack Tri-Coupler/ja
TVR-1180C Mk1 スタック式トライカプラー | ||
Adapter によって O.M.B.解体工業 | ||
接続サイズ | M | |
コスト | (合計) | 680.00 |
質量 | (合計) | 0.150 t |
空気抵抗 | 0.3 | |
耐熱温度 | 2000 K | |
耐衝撃性 | 12 m/秒 | |
開発技術 | 先進的建造技術 | |
開発導入費 | 2 100 | |
バージョンから | 0.7.3 | |
Part configuration | stackTriCoupler_v2.cfg | |
積載量 | なし |
The TVR-1180C Mk1 Stack Tri-Coupler is an adapter that allows for a single rocket to branch into 3 separate stacks.
Usage
All nodes on the TVR-1180C are designed for attaching parts with a diameter of 1 meter. As with all adapters, liquid fuel will flow through it. Despite the similar name, the TVR-1180C is not a decoupler; it does not jettison anything nor does it add a stage to the rocket. It branches into 3 separate stacks, but they are unsupported and prone to bending or breaking if the weight and thrust are not properly distributed. Rockets incorporating a tri-coupler are also likely to wobble, unless the stacks are opportunely bound together with EAS-4 Strut Connectors. The tricoupler is also subtly asymmetrical, so rockets must have control options to correct for induced pitch, yaw, and/or roll.
Another, unconventional use of this part is as a landing 'foot' - when landing very large craft (such as bases), the stock landing legs aren't big or powerful - using the strut parts as 'legs' and the tricoupler as a 'foot', you can artificially make your own landing leg!
ゲーム内の説明
「 | 3分岐アダプターです!かっこ良さが足りなかったら、この製品の出番です!これは分離装置ではないので、多段ロケットの分離には使えないことを忘れないでください。 | 」 |
変更点
- モデルとテクスチャを刷新
- 質量を0.8から0.3へ変更。
- (Undocumented part of fuel flow changes) added NoCrossFeedNodeKey = bottom (keeps fuel from flowing FROM the bottom nodes to prevent stack imbalances and such)
- テクスチャとUVマッピングを変更。(UV map by Dippeggs)
- Fuel can now flow through Strut parts like the tricoupler
- (Bug fix) VAB placement bug with tricouplers and fuel tanks (and decouplers)
- 実装。