Difference between revisions of "Mk1 Command Pod/ja"

From Kerbal Space Program Wiki
Jump to: navigation, search
m
Line 4: Line 4:
  
 
== 使い方 ==
 
== 使い方 ==
[[File:Mk1 Pod Interior View.png|left|thumb|Interior View of the Mk1 Pod. Kerbin can be seen through the window.]]
+
[[File:Mk1 Pod Interior View.png|left|thumb|Mk1 Podの内部の様子。 Kerbinは窓から外を見ることができる。]]
  
Usually placed at the top of the rocket, the Command Pod Mk1 provides all functionality of a command module. It has half the torque power of most other manned command modules. This is often sufficient for smaller rockets, though larger ones will require additional control systems.
+
通常このパーツはロケットの先端部に取り付けられる。このモジュールからすべての操作を行っている。ほとんどの有人モジュールに対して半分の回転力しかない。小型ロケットであれば十分であるが、大型ロケットになると回転力が足りないため追加でコントロールシステムを設置する必要がある。
  
The Mk1 Command Pod features a tiny [[radial size]] node on top, typically used for attaching a [[Mk16 Parachute]], and a small radial size node on the bottom.
+
Mk1 Command Podの特徴はtiny [[radial size]]の接続ポイントが先端部にあることであり、大抵はそこに[[Mk16 Parachute]]を設置したりする。また下部はsmall radial sizeの接続ポイントになっている。
The pod's crew hatch is outfitted with a small window through which an occupying Kerbal can look out during [[IVA]]. On the outside there are two rungs of ladders below the hatch.
+
ハッチは[[IVA]]した時に見ることができる小さな窓と同じ場所にある. ハッチの下には二つのはしごがついている。
  
 
== 詳細 ==
 
== 詳細 ==

Revision as of 00:10, 20 December 2013

Mk1 コマンドポッド
パーツ画像
Command pod によって
Kerlington Model Rockets and Paper Products Inc

接続サイズ S, M
コスト (合計) 600.00 Funds
(乾燥) 588.00 Funds
質量 (合計) 0.84 t
(乾燥) 0.80 t
空気抵抗 0.15-0.2
耐熱温度 2200 K
Volume N/A
耐衝撃性 14 m/秒
開発技術 Start.png スタート
開発導入費 0 Funds
バージョンから 0.7.3
Part configuration mk1Pod.cfg
Command module
ピッチトルク 5.0 kN·m
ヨートルク 5.0 kN·m
ロールトルク 5.0 kN·m
トルク消費電力
0.048
秒·kN·m
定員 (最大) Crew
(必要) Crew
一液式推進剤 10 Units of fuel
電力容量 50.0 
SASレベル × なし
Inventory Slots 1 slots
Volume Limit 50 l
Wing
揚力 0.35

Command Pod Mk1 とはKerbal を一人収容可能なcommand moduleである. Mercury capsule.によく似ている。

使い方

Mk1 Podの内部の様子。 Kerbinは窓から外を見ることができる。

通常このパーツはロケットの先端部に取り付けられる。このモジュールからすべての操作を行っている。ほとんどの有人モジュールに対して半分の回転力しかない。小型ロケットであれば十分であるが、大型ロケットになると回転力が足りないため追加でコントロールシステムを設置する必要がある。

Mk1 Command Podの特徴はtiny radial sizeの接続ポイントが先端部にあることであり、大抵はそこにMk16 Parachuteを設置したりする。また下部はsmall radial sizeの接続ポイントになっている。 ハッチはIVAした時に見ることができる小さな窓と同じ場所にある. ハッチの下には二つのはしごがついている。

詳細

Originally built as a placeholder for a demonstration mock-up of a rocket, the Mk1 Command Pod was heralded as a far safer and more reliable option than its predecessors by rocket scientists throughout the world. It is now commonly seen in active service.

Kerlington Model Rockets and Paper Products Inc.

トリビア

The model for this parts was replaced in バージョン 0.16, there is a memorial to the original located at the Kerbal Space Center.[1] An old command pod can also be found at the airbase on an island near KSC, in one of the hangars.

ギャラリー

歴史

0.16
  • Part rebalancing: Mass reduced from 1.0 to 0.8, and crew capacity reduced from 3 to 1.
  • New part model.
0.8.5
  • Exposed Kd, Ki and Kp parameters for tuning the SAS and CommandPod modules
0.8.2
  • (Bug fix) Pod cannot be dropped if an Escape Tower (PunchOut addon) is attached
0.7.3
  • Initial Release

References

  1. http://kerbaldevteam.tumblr.com/post/28557698420/obituary-mk1-pod