Mk1 Command Pod/ja
From Kerbal Space Program Wiki
Mk1 コマンドポッド | |||||
Command pod によって Kerlington Model Rockets and Paper Products Inc | |||||
接続サイズ | S, M | ||||
コスト | (合計) | 600.00 | |||
(乾燥) | 588.00 | ||||
質量 | (合計) | 0.84 t | |||
(乾燥) | 0.80 t | ||||
空気抵抗 | 0.15-0.2 | ||||
耐熱温度 | 2200 K | ||||
Volume | N/A | ||||
耐衝撃性 | 14 m/秒 | ||||
開発技術 | スタート | ||||
開発導入費 | 0 | ||||
バージョンから | 0.7.3 | ||||
Part configuration | mk1Pod.cfg | ||||
Command module | |||||
ピッチトルク | 5.0 kN·m | ||||
ヨートルク | 5.0 kN·m | ||||
ロールトルク | 5.0 kN·m | ||||
トルク消費電力 |
| ||||
定員 | (最大) | 1 | |||
(必要) | 1 | ||||
一液式推進剤 | 10 | ||||
電力容量 | 50.0 ⚡ | ||||
SASレベル | × なし | ||||
Inventory Slots | 1 slots | ||||
Volume Limit | 50 l | ||||
Wing | |||||
揚力 | 0.35 |
Command Pod Mk1 とはKerbal を一人収容可能なcommand moduleである. Mercury capsule.によく似ている。
使い方
通常このパーツはロケットの先端部に取り付けられる。このモジュールからすべての操作を行っている。ほとんどの有人モジュールに対して半分の回転力しかない。小型ロケットであれば十分であるが、大型ロケットになると回転力が足りないため追加でコントロールシステムを設置する必要がある。
Mk1 Command Podの特徴はtiny radial sizeの接続ポイントが先端部にあることであり、大抵はそこにMk16 Parachuteを設置したりする。また下部はsmall radial sizeの接続ポイントになっている。 ハッチはIVAした時に見ることができる小さな窓と同じ場所にある. ハッチの下には二つのはしごがついている。
詳細
「 | Originally built as a placeholder for a demonstration mock-up of a rocket, the Mk1 Command Pod was heralded as a far safer and more reliable option than its predecessors by rocket scientists throughout the world. It is now commonly seen in active service. — Kerlington Model Rockets and Paper Products Inc. |
」 |
トリビア
The model for this parts was replaced in バージョン 0.16, there is a memorial to the original located at the Kerbal Space Center.[1] An old command pod can also be found at the airbase on an island near KSC, in one of the hangars.
ギャラリー
歴史
- Part rebalancing: Mass reduced from 1.0 to 0.8, and crew capacity reduced from 3 to 1.
- New part model.
- Exposed Kd, Ki and Kp parameters for tuning the SAS and CommandPod modules
- (Bug fix) Pod cannot be dropped if an Escape Tower (PunchOut addon) is attached
- Initial Release
References
|